2002 BMW X5 Drivetrains
More 2002 BMW X5 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2002 BMW X5, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2002 BMW X5 Drivetrains
Rein – CV Boot Kit (Part No.BKN0108R)
from
$34.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
National – Multi Purpose Seal (Part No.224250)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Febi – Driveshaft Flex Join (Part No.K1020119041FEB)
from
$111.58
Driveshaft Flex Join
Ajusa – Diff. Side Cover O-R (Part No.J7042947336AJU)
from
$11.88
Diff. Side Cover O-R
Dorman – Front Drive Shaft (Part No.938-326)
from
$904.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.42
Differential Side Cover Seal, 90 x 44 x 10
Corteco – Output Shaft Seal (Part No.J1157254229CFW)
from
$18.92
Output Shaft Seal
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.LM503349A)
from
$22.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Vaico – CV Joint (Part No.K61001094537VCO)
from
$124.95
CV Joint
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Febi – Axle Shaft Nut (Part No.K4030133883FEB)
from
$12.32
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Original Equipment – Transfer Case Motor (Part No.J71002489734OEA)
from
$498.55
Transfer Case Motor
Rein – Differential Plug (Part No.HWP0065)
from
$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.
Product Features:
See More
Product Features:
- Designed to tight tolerances to ensure proper sealing.
- Rein Oil Drain Plugs are coated for high corrosion resistance.
- Designed and constructed to strict engineering quality standards.
- Includes copper sealing gasket.
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV428570)
from
$188.99
Product Features:
See More
- Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.
- High moly CV joint grease with stainless-steel boot bands
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Dorman – OE Solutions Driveshaft Support Bearing (Part No.K1040720058DOR)
from
$142.98
Dorman’s Driveshaft Support Bearing is quality-engineered to eliminate drivetrain vibration and restore drivability.
Product Features:
See More
Product Features:
- Rubber and steel construction ensures long-lasting reliability
- Direct replacement for a proper fit
- Includes u-joint (where applicable)
- Rigorous quality control measures ensure conformance to product standards
Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)
SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)
from
$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
- Rubber support cushions are manufactured from durable rubber compounds
- Support frames are constructed from high quality steel or aluminum
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6124)
from
$76.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2017
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.10 INCH / 3 MM
- MOUNT WIDTH: 6.35 INCH / 161 MM
- STYLE: ROUND FRAME
- WITH WINGS
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020116405FEB)
from
$98.22
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Dorman – Driveshaft Flex Coupler (Part No.935-115)
from
$164.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.39
DIFFERENTIAL DRAIN P
Corteco – Pinion Seal (Part No.J7010481273CFW)
from
$12.58
Pinion Seal
Popular 2002 BMW X5 Drivetrains Categories
2002 BMW X5 Drivetrains
You count on your 2002 BMW X5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 57 Drivetrains ranging in price from $5.00 to $949.99, you’re sure to find everything you need for your 2002 BMW X5.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Carquest Premium, and National. 2002 BMW X5 Drivetrains start as low as $5.00!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,182 extensive product reviews on 2002 BMW X5 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Shaft Repair Sleeve with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2002 BMW X5 below to get started!
Top-Rated Drivetrains Brands For Your 2002 BMW X5
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 BMW X5 running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2002 BMW X5 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2002 BMW X5 Drivetrains
What are the most purchased Drivetrains for the 2002 BMW X5?
Out of 57 Drivetrains for the 2002 BMW X5, the most popular in our inventory are:
What are the top-rated 2002 BMW X5 Drivetrains?
Top-rated Drivetrains for your 2002 BMW X5 based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
from
$25.49
(1)
Bearings
“This Is The One That Fit My 1971 CHEVY TRUCK 12 BOLT PINION REAR BACK BEARING”
