2002 BMW 325xi Suspension Parts
More 2002 BMW 325xi Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2002 BMW 325xi, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2002 BMW 325xi Suspension Parts
MTC – Trailing Arm Bolt (Part No.L2038444008MTC)
from
$7.37
Trailing Arm Bolt
APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007266120APA)
from
$12.48
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
KYB – Jounce Bumper and Bellows (Part No.SB110)
from
$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457527BIL)
from
$189.89
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Whiteline – Brace Strut Tower (Part No.KSB557)
from
$171.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
Monroe – Strut-Mate Strut Mounting Kit (Part No.903918)
from
$83.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
APA/URO Parts – APA/URO Coil Spring Shim (Part No.L5007266124APA)
from
$10.60
The APA/URO Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Dorman – Suspension Coil Spring (Part No.926-576)
from
$149.99
This coil spring is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment spring on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Spring Pad Lower Bushing (Part No.W72042)
from
$38.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Original Equipment – Headlight Level Sensor (Part No.P8015463914OEA)
from
$92.66
Headlight Level Sensor
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000440071BIL)
from
$118.34
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Carquest Premium – Complete Strut Assembly 18-920236: Includes Strut, Coil Spring and Mount (Part No.18-920236)
from
$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
See More
Elring – Shock / Strut Paper Mount Gasket (Part No.L4017263905ELR)
from
$2.06
The Elring Shock / Strut Paper Mount Gasket is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets or exceeds OEM specifications
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
KYB – Jounce Bumper and Bellows (Part No.SB114)
from
$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
AST – Trailing Arm Limiter (Part No.L2150741051AST)
from
$35.02
Trailing Arm Limiter
Whiteline – Control Arm Lower Rear Inner And Outer Bushing (Part No.W63400)
from
$77.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Lemfoerder – OE Replacement Trailing Arm Bushing (Part No.L2006238599LEM)
from
$25.21
The Lemfoerder Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Dorman – Suspension Control Arm (Part No.524-480)
from
$119.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Lemfoerder – OE Replacement Suspension Wishbone (Part No.L2000750578LEM)
from
$142.30
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Rare Parts – Shock Mount (Part No.RP53131)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore steering and handling
KYB – Shock Mounting Kit (Part No.L4049847885KYB)
from
$30.72
The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MOOG – Shock Mount (Part No.K90322)
from
$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Dorman – Suspension Shock Mount (Part No.523-247)
from
$70.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.
Product Features:
See More
Product Features:
- Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
- Complete kit – all necessary mounting hardware is included with each mount
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
Rare Parts – Control Arm Bush (Part No.RP15912)
from
$49.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm Bushing (Part No.523-074)
from
$224.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Control Arm Lower Inner Bushing (Part No.W62625)
from
$50.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Popular 2002 BMW 325xi Suspension Parts Categories
2002 BMW 325xi Suspension Parts
You count on your 2002 BMW 325xi to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 58 Suspension Parts ranging in price from $2.06 to $309.66, you’re sure to find everything you need for your 2002 BMW 325xi.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 19 different brands like Valvoline, Moog, and Monroe. 2002 BMW 325xi Suspension Parts start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 52 extensive product reviews on 2002 BMW 325xi Suspension Parts. Some of the top-rated Suspension Parts products we carry are OE Replacement Control Arm with 3.7 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2002 BMW 325xi below to get started!
Top-Rated Suspension Parts Brands For Your 2002 BMW 325xi
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 BMW 325xi running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Monroe, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Air Suspension and Kits and Shocks and Struts. All are waiting to get your 2002 BMW 325xi back on the road. Some of the top-rated Monroe products in these categories are:
Top-Rated MOOG Suspension Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Suspension Parts for your 2002 BMW 325xi, and some of our most reviewed MOOG parts include:
FAQs for 2002 BMW 325xi Suspension Parts
What are the most purchased Suspension Parts for the 2002 BMW 325xi?
Out of 58 Suspension Parts for the 2002 BMW 325xi, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 2002 BMW 325xi Suspension Parts?
Top-rated Suspension Parts for your 2002 BMW 325xi based on customer reviews/ratings are:
from
$309.66
(3)
OE Replacement Control Arm
“Fits perfectly on a 1997 Ford Econoline 150.On the Middle Side Right Cargo Door.Hopefully it’ll last as long as the Original.They Break from Pulling ”
