from

$162.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$301.99

The Engine Oil Separator is part of the positive crankcase ventilation (PCV) system. This part is typically located on the valve cover and is designed to trap engine oil vapors in the device and return the vapors back into the engine crankcase. When this part becomes plugged oil vapors will be ingested into the intake air system and cause excessive oil consumption and smoke from the tailpipe.

from

$192.66

Corteco Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. Corteco Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

Product Features:

OE Quality
Includes woodruff key, bolts, and washers for a complete repair (where applicable)
Direct replacement to ensure proper fit

from

$195.86

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$3.84

Oil Dipstick Seal

from

$23.52

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$92.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Matches Original Equipment design specifications
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$6.82

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
Made to specific sizes and standards to ensure a proper fit
Designed and constructed to strict engineering quality standards

from

$7.99

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

Prevents moisture and debris from entering and contaminating the system
Direct fit
Manufactured to strict engineering standards/specifications in materials and tolerances
Produced by an original equipment supplier

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$105.39

Oil Level Sender

from

$61.64

KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:

Original Equipment Manufacturer
Maximum Load-Bearing Capacity
Low Wear and Friction
Advanced Surface Coatings

from

$10.49

OIL SENSOR O-RING

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$21.33

This OE quality oil dipstick is manufactured to meet OEM specifications for form, fit and function.

Product Features:

Original Equipment fit, form and function
Manufactured from high quality materials
Right fit the first time

from

$2.76

Valve Cover Washer

from

$28.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$38.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$795.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets without head gasket(s)
Requires purchase of head gasket(s) separately
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$2.84

The APA/URO Engine Cooling Fan Switch Seal is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$9.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$23.99

Product Features:

Brand may vary by location

from

$429.99

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

Designed as a premium OE replacement
Dynamically balanced for smooth operation
Strong Iron casting for maximum strength
OEM equivalent bonded rubber

from

$50.93

CRP Automotive parts provide innovative designs, use leading-edge materials, and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features: