2001 Volvo VNM Belts and Hoses

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

•  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
•  Provides greater durability and flexibility – 35% stronger than all previous versions
•  Features specially treated cords for added strength, stability and reliability
• Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
• Problem solver for troubled drives
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch

Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:

• Capable of withstanding extreme temperatures and high-pressure environments
• Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
• Not suitable for fuel or oil transfer
• PLEASE NOTE: Priced and sold by inch. See store for details.

Product Features:

• Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
• Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
• OE-quality fit for virtually every domestic or import vehicle on the road today
• Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
• Premium bearings eliminate bearing noise
• Mounting hardware included for some popular applications
• Reliable operation under severe conditions

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the pat

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This tensioner has been redesigned from the original OE design to increase life and durability. This tensioner has 1 pulley a larger pivot bushing, longer tensioner arm for reduced arm motion, an inline load balance for enhanced tensioner alignment, 2 6303 ball bearings proven to last longer than conventional bearings, higher damping consequently reducing arm motion and wear as well as an optimized install feature for ease on tensioner replacement. This tensioner fits 2016-15 Mack, CXU Series, Mack MP7 Diesel, Tensioner Assy. – Fan. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Optimized components engineered for maximum strength and durability
• Patented design provides superior belt alignment and tension for improved drive efficiency and life
• Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
• Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
• Double row bearings carry more load and last up to 3X longer than two individual bearings
• Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
• Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the pat

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Includes installation instructions

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

• Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
• Engineered with compounds that resist electrochemical degradation
• Approved for marine applications
• Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: For a maintenance free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transfer applications
• PLEASE NOTE: Item is priced and sold by the inch. See store for details.

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:

• Capable of withstanding extreme temperatures and high-pressure environments
• Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
• Not suitable for fuel or oil transfer
• PLEASE NOTE: Priced and sold by inch. See store for details.

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is 74.1mm O.D. Applications include HD Truck and Bus applications Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic polymer construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.