2001 Mercury Mountaineer Camshafts
More 2001 Mercury Mountaineer Camshafts
Find your specific 2001 Mercury Mountaineer original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2001 Mercury Mountaineer Camshafts
DENSO – Camshaft Position Sensor (Part No.196-6021)
from
$49.99
DENSO’s camshaft position sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technlogy which helps control ignition timing more precisely.
See More
Carquest – Engine Camshaft Position Sensor (Part No.22C1003)
from
$62.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- 100% testing to meet OE performance
- High temperature resistance for longer life
Delphi – Engine Camshaft Position Sensor (Part No.SS10058)
from
$31.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi products are manufactured in a Delphi ISO certified facility
- Designed digital output for maximum signal to noise ratio
- All parts used in the manufacture process are Delphi validated
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1013)
from
$27.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Mahle – Camshaft Follower (Part No.A4010196839MAH)
from
$24.21
MAHLE Cleveite Inc. is not responsible for failures resulting from owner, operator or third party abuse or neglect including, but not limited to engine operation without adequate lubricant or coolant, over or under-fuelling, over-speeding, lack of proper maintenance to cooling, lubrication or air intake systems, improper storage, starting, warm-up, run-in or shutdown procedures or the continued operation of an engine after the first sign of a malfunction. MAHLE Cleveite Inc. is not responsible for failures resulting from improper installation or repair procedures, alteration or the misapplication of parts, or use in engines modified for competition or levels of performance beyond the engine manufacturers original specifications. Mahle/Cleveite – (The MAHLE Group) is one of the largest global automotive parts manufacturers, specializing in Engine Components, Filtration and Peripherals.
See More
Mahle – Cam Follower (Part No.A4010197412MAH)
from
$16.70
Cam Follower
National – Multi Purpose Seal (Part No.3051N)
from
$24.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Felpro – Engine Variable Valve Timing (VVT) Sensor Seal (Part No.ES 71426)
from
$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
National – Multi Purpose Seal (Part No.473560N)
from
$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Carquest Premium – Engine Camshaft Synchronizer (Part No.CZC1006)
from
$479.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Validation tested from -40 to 300 degrees Fahrenheit
- Life-cycle tested to meet or exceed OE specifications
- OE-style brackets, hold downs, hardware, spacers and weather-tight connectors
- Proper alignment, positioning and spacing for faster, easier installation
- Sensor is properly sealed to prevent leaks
- Sealed connections to prevent environmental corrosion and performance issues
- Direct OE replacement
- Global coverage for import and/or domestic applications
Carquest Premium – Camshaft Synchronizer – 100% NEW (Part No.T2801)
from
$61.99
CARQUEST camshaft synchronizers captures the camshaft position/speed and sends the info to the ECM to ensure proper ignition timing, maximizing horsepower and fuel economy.
Product Features:
See More
Product Features:
- 100% tested to original equipment specifications (form, fit and function).
- Precision machined ground shafts assure high speed accuracy and prevent bearing failures.
- Alignment positioning tool included (where applicable) to ensure proper installation.
Cardone New – Camshaft Synchronizer (Part No.84-S2800)
from
$60.99
CARDONE New Camshaft Synchronizers provide reliable performance at the best price. Each unit is 100% tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance ensuring that your vehicle always starts on command. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Precise machining tolerances prevent oil leakage, poor timing, setting of the “Check Engine” light, and premature failure
- All electronic module components are 100% computer tested to ensure full functionality
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Carquest Premium – Engine Camshaft Synchronizer (Part No.CZC1005)
from
$141.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Validation tested from -40 to 300 degrees Fahrenheit
- Life-cycle tested to meet or exceed OE specifications
- OE-style brackets, hold downs, hardware, spacers and weather-tight connectors
- Proper alignment, positioning and spacing for faster, easier installation
- Sensor is properly sealed to prevent leaks
- Sealed connections to prevent environmental corrosion and performance issues
- Direct OE replacement
- Global coverage for import and/or domestic applications
Sealed Power – Engine Camshaft Bearing Set (Part No.1204M)
from
$43.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$321.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)
from
$492.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Edelbrock – Rollin’ Thunder Camshaft for Ford 5.0L V8 (Part No.3722)
from
$508.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Popular 2001 Mercury Mountaineer Camshafts Categories
2001 Mercury Mountaineer Camshafts
Maybe you’re in the middle of a full rebuild of that 2001 Mercury Mountaineer. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 16 different Camshafts in our inventory ranging from $11.49 to $508.99. That means you can find the exact parts or products you need to keep that 2001 Mercury Mountaineer running smoothly.
Camshafts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2001 Mercury Mountaineer. Carquest Premium, Sealed Power, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 2001 Mercury Mountaineer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 2001 Mercury Mountaineer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 2001 Mercury Mountaineer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 Mercury Mountaineer demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Mountaineer the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular National Camshafts
We carry National parts in our stock across Camshaft Seals categories, plus more. For a 2001 Mercury Mountaineer, our most popular National Camshafts include:
FAQs for 2001 Mercury Mountaineer Camshafts
What are the most purchased Camshafts for the 2001 Mercury Mountaineer?
Out of 16 Camshafts for the 2001 Mercury Mountaineer, the most popular in our inventory are:
from
$27.49
This product is not rated
Engine Crankshaft Position Sensor Connector
Engine Camshaft Synchronizer Connector
