2001 Mercedes-Benz SL500 Engine Cooling Parts

Essential 2001 Mercedes-Benz SL500 Engine Cooling Parts

Felpro – Engine Water Pump Gasket (Part No.35912)

Engine Water Pump Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Universal Reverse Rotation Thermal Standard Duty Fan Clutch (Part No.216041)

Universal Reverse Rotation Thermal Standard Duty Fan Clutch

from

$260.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-310)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$183.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.14569)

Integrated Thermostat Housing: With Seal, 192 Degrees

from

$49.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 176 Degrees (Part No.902-5144)

Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 176 Degrees

from

$58.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Graf – Water Pump (Part No.G3000948549GRA)

Water Pump

from

$120.87
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Graf – Graf Water Pump (Part No.G3000948546GRA)

Graf Water Pump

from

$119.19
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)

X-Treme S-Blade Electric Fan

from

$519.99
X-Treme S-Blade Electric Fan

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)

Engine Coolant Reservoir Cap

from

$19.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Hella – Coolant Level Sensor (Part No.G105074531HEL)

Coolant Level Sensor

from

$38.27
Coolant Level Sensor

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1044)

Engine Coolant Level Sensor

from

$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

APA/URO Parts – Water Pump Pulley (Part No.G302066529APA)

Water Pump Pulley

from

$73.47
Water Pump Pulley

Bosch – Auxiliary Water Pump (Part No.G30501098083BOS)

Auxiliary Water Pump

from

$187.27
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • CO²-reduction by optimized efficiency, speed control and reduced weight
  • Coverage of a wide hydraulic performance range
  • Reduced noise level
See More

Bosch – Auxiliary Water Pump (Part No.G305028293BOS)

Auxiliary Water Pump

from

$151.14
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • CO²-reduction by optimized efficiency, speed control and reduced weight
  • Coverage of a wide hydraulic performance range
  • Reduced noise level
See More

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Radiator Drain Plug

from

$6.23
Radiator Drain Plug

Delphi – Engine Coolant Temperature Sensor (Part No.TS10263)

Engine Coolant Temperature Sensor

from

$32.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Rein – Temperature Sensor (Part No.ELC0074)

Temperature Sensor

from

$14.99
Rein Automotive OE temperature sensors are made to factory specifications ensuring proper fit, form and function. The temperature sensor is used to report exhaust temperatures to the vehicle’s ECU. The vehicle uses this information to control engine and emission paramaters. Rein temperature sensors include a vehicle specific connector that fits directly into the factory plug. Our quality temperature sensors aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component.

Product Features:
  • Direct OE replacemet
  • Designed to meet or exceed factory specifications
  • Made using high quality materials
  • Uses vehicle specific style connector for quick replacement.
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1075)

Coolant Temperature Sensor with O-Ring

from

$25.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

2001 Mercedes-Benz SL500 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2001 Mercedes-Benz SL500. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 32 different Engine Cooling Parts in our inventory ranging from $6.23 to $519.99. That means you can find the exact parts or products you need to keep that 2001 Mercedes-Benz SL500 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2001 Mercedes-Benz SL500. Permatex, Carquest Premium, and Rein are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2001 Mercedes-Benz SL500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 418 reviews in this category, some of the top rated parts include Engine Water Pump: New, Gasket/Seals Included with 5.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2001 Mercedes-Benz SL500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2001 Mercedes-Benz SL500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 Mercedes-Benz SL500 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your SL500 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Permatex Engine Cooling Parts

We carry Permatex parts in our stock across Engine Water Pump Inlet Pipe Gaskets categories, plus more. For a 2001 Mercedes-Benz SL500, our most popular Permatex Engine Cooling Parts include:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top 2001 Mercedes-Benz SL500 Engine Cooling Parts from Permatex

Permatex products are another trusted brand when it comes to Engine Cooling Parts for your 2001 Mercedes-Benz SL500. Popular Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2001 Mercedes-Benz SL500 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2001 Mercedes-Benz SL500?

Out of 32 Engine Cooling Parts for the 2001 Mercedes-Benz SL500, the most popular in our inventory are:
Engine Water Pump: New, Gasket/Seals Included
from $189.99
(17)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
Integrated Thermostat Housing: With Seal, 192 Degrees
from $49.49
(5)
Integrated Thermostat Housing: With Seal, 192 Degrees
Thermostat and Water Outlet Assemblies
Engine Coolant Reservoir Cap
from $19.79
(1)
Engine Coolant Reservoir Cap
Coolant Reservoir Caps

What are the top-rated 2001 Mercedes-Benz SL500 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2001 Mercedes-Benz SL500 based on customer reviews/ratings are:
Engine Water Pump: New, Gasket/Seals Included
from $247.99
(1)
Engine Water Pump: New, Gasket/Seals Included
“Perfect fit”