2001 Mercedes-Benz CL500 Fuel and Emissions Systems

Essential 2001 Mercedes-Benz CL500 Fuel and Emissions Systems

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings

from

$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1932)

Multi Purpose Relay

from

$25.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Bosch – Pressure Sensor (Part No.0261230189)

Pressure Sensor

from

$42.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:
  • Bosch OE quality pressure sensors for accurate measurements
  • Bosch OE quality pressure sensors for long term stability
  • Bosch OE quality pressure sensors with a short response time
  • Bosch OE quality pressure sensors with improved media resistance
See More

Febi – Engine Coolant Temperature Sensor (Part No.C6020479877FEB)

Engine Coolant Temperature Sensor

from

$16.97
The Febi Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Vapor Canister (Part No.CPN2258)

Vapor Canister

from

$691.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11189-02)

Fuel Injector O-Ring Kit

from

$32.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Vemo – Purge Valve (Part No.B7080380842VMO)

Purge Valve

from

$90.33
Purge Valve

Bosch – Bosch Oxygen Sensor (Part No.C501061030BOS)

Bosch Oxygen Sensor

from

$101.36
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1185)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$2.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA2933)

Fuel Tank Pressure Sensor

from

$162.99
Fuel Tank Pressure Sensor

NTK – Switching Oxygen Sensor: 4 Wire, 24.75" Long, Heated, Direct Fit (Part No.25564)

Switching Oxygen Sensor: 4 Wire, 24.75" Long, Heated, Direct Fit

from

$119.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

APA/URO Parts – EGR Line Fitting (Part No.B7013308578APA)

EGR Line Fitting

from

$5.49
EGR Line Fitting

Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)

Fuel Cap Tester Adapter

from

$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

VDO – Fuel Tank Sending Unit (Part No.E2030305455VDO)

Fuel Tank Sending Unit

from

$360.61
The VDO Fuel Tank Sending Unit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications for fit, form, and function
See More

Carquest Premium – Fuel Cap: 10845, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10845)

Fuel Cap: 10845, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$36.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Delphi – Electric Fuel Pump: 14V, External, Rollevane Design (Part No.FE0346)

Electric Fuel Pump: 14V, External, Rollevane Design

from

$306.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

APA/URO Parts – Vacuum Hose Connecto (Part No.B202573187APA)

Vacuum Hose Connecto

from

$5.28
Vacuum Hose Connecto

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1226)

Vapor Canister Purge Solenoid

from

$91.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Secondary Air Pump (Part No.B6010149457BOS)

Secondary Air Pump

from

$606.75
The Bosch air pump is designed and manufactured to be an exact fit OE equivalent replacement, maintaining the quality and performance of the Original Equipment it replaces. Installation Note: When replacing the Air Pump it is also recommended that you check and /or replace the Air Pump Relay

Product Features:
  • OE design
  • Low noise
  • Long working life
  • High thermal and mechanical resistance
  • Sealed bearing design
  • Exact OE Body and engine mounting
See More

Rein – Breather Hose Kit (Part No.ABK0131)

Breather Hose Kit

from

$29.99
Rein Automotive OE quality breather hose kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements, all components of the Rein Breather Hose kits are identical to the OEM.

Product Features:
  • Provides all needed hoses to replace the crankcase breather valve.
  • Manufactured with high quality materials.
  • Direct fit components for easy installation.
  • Matches original equipment design specifications.
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mahle – FI Throttle Body Mou (Part No.C7001453663MAH)

FI Throttle Body Mou

from

$5.18
FI Throttle Body Mou

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1061)

Exhaust Gas Recirculation (EGR) Valve

from

$157.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Mass Air Flow (MAF) Sensor (Part No.0280217810)

Mass Air Flow (MAF) Sensor

from

$202.99
Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light

Product Features:
  • OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
  • 100% new product
  • Not re-manufactured or rebuilt
  • Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
  • Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
  • Can provide up to 20 percent better fuel consumption
See More

Bosch – Air Mass Meter (Part No.B3130115776BOS)

Air Mass Meter

from

$201.65
Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:
  • OEM Quality Direct fit Application
  • Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
  • Extensive measuring range
  • Highly sensitive, particularly for small changes in flow rate
  • Wear-free since there are no moving parts
  • Insensitive to dirt and contamination
  • Utilizes the factory style mounts, connectors and fittings
  • Provides exceptional reliability
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1945)

Remanufactured Fuel Injector

from

$50.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1715)

Remanufactured Fuel Injector

from

$46.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

2001 Mercedes-Benz CL500 Fuel and Emissions Systems

You count on your 2001 Mercedes-Benz CL500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 59 Fuel and Emissions Systems ranging in price from $2.99 to $691.99, you’re sure to find everything you need for your 2001 Mercedes-Benz CL500.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 19 different brands like Bosch, Delphi, and Carquest Premium. 2001 Mercedes-Benz CL500 Fuel and Emissions Systems start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 153 extensive product reviews on 2001 Mercedes-Benz CL500 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Exhaust Gas Recirculation (EGR) Valve with 4.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2001 Mercedes-Benz CL500 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2001 Mercedes-Benz CL500

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Mercedes-Benz CL500 running right for years to come. In our inventory you’ll find brands like Bosch, Delphi, Carquest Premium, and even more.

Popular Carquest Premium Fuel and Emissions Systems

You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 2001 Mercedes-Benz CL500 back on the road. Some of the top-rated Carquest Premium products in these categories are:

Top-Rated Fuel and Emissions Systems


If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 2001 Mercedes-Benz CL500, and some of our most reviewed parts include:

FAQs for 2001 Mercedes-Benz CL500 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2001 Mercedes-Benz CL500?

Out of 59 Fuel and Emissions Systems for the 2001 Mercedes-Benz CL500, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Mass Air Flow Sensor (MAF) - 100% NEW
from $109.99
This product is not rated
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air
Fuel Pump Includes Wiring Harness and Strainer
from $276.99
This product is not rated
Fuel Pump Includes Wiring Harness and Strainer
Fuel Pumps

What are the top-rated 2001 Mercedes-Benz CL500 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2001 Mercedes-Benz CL500 based on customer reviews/ratings are:
Exhaust Gas Recirculation (EGR) Valve
from $227.63
(1)
Exhaust Gas Recirculation (EGR) Valve
“Quality item made by Piersburg, who also makes the factory EGR valves for Mercedes, so should be solid. My only problem is that the description states”