2001 Jeep Wrangler Vehicle Hoods

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

“Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “”bouncing”” or “”Jumping”” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!”

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Lift supports are pressurized cylinders that are used to support hoods, hatches & rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Our new Outlaw Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 2.0L/3.6L is perfect for the person looking for an aggressive exterior sound with a moderate interior tone with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system fits both 2/4 door models, features full stainless steel construction, uses the factory hanger locations and has a specially designed Outlaw Series muffler with dual 2.50-inch mandrel-bent tailpipes. The system is finished off with a pair of large 4.00-inch polished stainless steel tips embossed with the Flowmaster logo and exit out under the rear bumper. Covered by Flowmaster’s Limited Warranty and designed for a perfect fit, the kit includes all necessary parts and hardware for easy installation you can do at home.

Factory replacement M12x1.75x150mm flange head bolt kit, Stock replacement bolts are hard to find due to their uncommon length. This kit can be used for either GM LS/LT & Mopar Gen III Hemi poly mounts

Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2007-2018 Jeep Wrangler JK with the 3.6L/3.8L engines. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

“This Flow FX cat-back exhaust system is designed for 2000-2006 Jeep Wrangler TJ with 4.0L engine and features all stainless steel construction for added durability and longevity. The 2.50-inch Flow FX “”straight-through”” performance muffler mounts high in the frame rail just behind the factory catalytic converter and bolts up to the factory flange. The Flow FX system has a moderate deep powerful sound outside with minimal interior resonance. The 2.50-inch mandrel-bent stainless steel tailpipe is tucked up high in the undercarriage protecting it from being crushed when traversing rocky terrain. The system is finished off with a large 3.50-inch black ceramic coated stainless steel tip embossed with the Flowmaster logo. Uses the factory hanger locations, comes with installation instructions and all hardware necessary for a quick and easy installation you can do at home.”

The Flowmaster American Thunder Axle-back exhaust system for the 2018-2026 Jeep Wrangler JL is perfect for the person looking for maximum performance and ground clearance. The 2.50-inch tailpipe features a mandrel bent 409 stainless steel tailpipe finished off with a 3.00-inch polished 304 stainless steel tip and fits both 2 and 4 door models with the 2.0L Turbo or the 3.6L engine. This system replaces the factory transverse muffler reducing weight, improves ground clearance, and provides a moderate sound level that is not offensive or will be considered loud by most people. Because this system tucks the tailpipe up high, an aftermarket metal bumper is generally recommended. The exhaust system is covered by our Limited Warranty. Designed for a perfect fit, this system includes all necessary parts and hardware for easy and quick installation you can do at home in about 15 minutes.

Flowmaster introduces our new Flow FX Extreme stainless steel cat-back exhaust system for the 2018-2026 Jeep Wrangler JL with the 2.0L turbo engine. This system uses a Flow FX series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

These engine mounts work together with the stock skid plate / transmission cross member to mount the transmission & stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan & accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine). The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use.

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

New Economy Replacement Hood Panel, One Washer Hole, High Strength Steel

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.