2001 Infiniti QX4 Steering and Chassis Parts

Essential Steering and Chassis Parts for 2001 Infiniti QX4s

Cardone – Remanufactured Power Steering Pump (Part No.21-5284)

Remanufactured Power Steering Pump

from

$199.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

MOOG – Camber Adjusting Kit (Part No.K90474)

Camber Adjusting Kit

from

$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

National – Multi Purpose Seal (Part No.221710)

Multi Purpose Seal

from

$6.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Power Steering Rack Mount Bushings (Part No.905-402)

Power Steering Rack Mount Bushings

from

$27.99
This rack and pinion bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.524-287)

Suspension Control Arm

from

$94.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

CTR – Link Bushing (Part No.L2052157375CTR)

Link Bushing

from

$16.46
Link Bushing

Nichirin – Power Steering Pressure Line Assembly (Part No.M2015939348NIC)

Power Steering Pressure Line Assembly

from

$110.91
Nichirin is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:
  • Excellent pulsation absorption.
  • Advanced tuning design technology to be satisfied with each vehicle’s requirement
  • The choice of many premium cars – silent vehicle interior due to reduced noise transmission
  • High heat resistance
  • High-pressure durability
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9322)

Rack & Pinion Bellows Kit

from

$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

TRW – Ball Joint (Part No.L2020341711TRW)

Ball Joint

from

$83.82
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

AST – Polyurethane Sway Bar Bushing (Part No.L1050650343AST)

Polyurethane Sway Bar Bushing

from

$10.68
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

MOOG – Ball Joint (Part No.K90662)

Ball Joint

from

$106.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

MOOG – Stabilizer Bar Link (Part No.K80435)

Stabilizer Bar Link

from

$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90601)

Stabilizer Bar Bushing Kit

from

$18.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

TRW – Radius Rod (Part No.L2018157501TRW)

Radius Rod

from

$103.14
Radius Rod

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3020)

Remanufactured Rack and Pinion Assembly

from

$482.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and fun ction.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Driveworks – Steering Tie Rod End (Part No.DW-ES3466)

Steering Tie Rod End

from

$27.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

MOOG – Tie Rod End (Part No.EV396)

Tie Rod End

from

$53.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Beck/Arnley – Outer Tie Rod End (Part No.101-4746)

Outer Tie Rod End

from

$39.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Powercraft – Rack Pinion Seal Kit (Part No.8954)

Rack Pinion Seal Kit

from

$88.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8799)

Pump Seal Kit

from

$29.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8942)

Pump Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Upgrade your 2001 Infiniti QX4 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2001 Infiniti QX4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Steering and Chassis Parts are key to keeping your QX4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Steering and Chassis Parts for the 2001 Infiniti QX4, designed to meet your needs without breaking the bank. From Sway Bar replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2001 Infiniti QX4 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.86 to $658.17, with an average price of $83.78. Our 74 Steering and Chassis Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2001 Infiniti QX4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Infiniti QX4, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, Driveworks, Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. Driveworks and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $13.29, and at an average 4 stars rating. With 132 customer reviews and counting, our 2001 Infiniti QX4 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Infiniti QX4 is always ready to roll. We’re committed to providing you with everything you need to keep your QX4 in top shape, all in one place. Start shopping confidently below for your 2001 Infiniti QX4!

Best-Selling Sway Bars for 2001 Infiniti QX4s

Enhance the driving experience in your Infiniti with 22 quality Sway Bar components, starting at $1.86.

MOOG – Stabilizer Bar Bushing Kit (Part No.K90024)

Stabilizer Bar Bushing Kit

from

$26.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K90659)

Sway Bar Link Kit

from

$22.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
  • Wrench flats at the base of the stud allow for the use of sockets for easy installation
See More

TRW – Stabilizer Link (Part No.L1030157361TRW)

Stabilizer Link

from

$51.83
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

AST – Polyurethane Sway Bar Link Bushing (Part No.L1031647993AST)

Polyurethane Sway Bar Link Bushing

from

$9.74
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

MOOG – Stabilizer Bar Link (Part No.K80435)

Stabilizer Bar Link

from

$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

TRW – Sway Bar Bushing Kit (Part No.L1049446203TRW)

Sway Bar Bushing Kit

from

$33.01
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90601)

Stabilizer Bar Bushing Kit

from

$18.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Stabilizer Bar Link (Part No.K90659)

Stabilizer Bar Link

from

$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Driveworks – SWAY BAR BUSHING (Part No.DW-K90024)

SWAY BAR BUSHING

from

$13.29
Driveworks bushings are designed to absorb vibration and noise and deliver better handling, while providing the performance of urethane without the “squeak” normally associated with it.

Product Features:
  • Meets or exceeds OE performance specifications
  • Replacement helps reduce vehicle noise and sway while turning
See More

Whiteline – Sway Bar Link (Part No.KLC180-195)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5178)

Stabilizer End Link

from

$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Beck/Arnley – Stabilizer Link Kit (Part No.101-4869)

Stabilizer Link Kit

from

$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Corrosion resistant coatings
  • Includes components and hardware necessary for a complete replacement
  • Hardware functionality matches original design requirements
  • Application specific for this vehicle
See More

CTR – Sway Bar Link (Part No.L1030157361CTR)

Sway Bar Link

from

$31.89
Sway Bar Link

International Suspension Group – Sway Bar Link (Part No.L1030157218ISG)

Sway Bar Link

from

$26.20
Sway Bar Link

TRW – Sway Bar Bushing Kit (Part No.L1049452009TRW)

Sway Bar Bushing Kit

from

$23.41
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Autopart International Inc – Sway Bar Link (Part No.L10301906587API)

Sway Bar Link

from

$22.33
Sway Bar Link

Beck/Arnley – Stabilizer Bushing (Part No.101-6460)

Stabilizer Bushing

from

$20.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Bushings are resistant to heat, wear, salt, road grime, and oils
  • Made from a high grade rubber compound
  • Quality construction for durability
  • Application specific for this vehicle
See More

International Suspension Group – Sway Bar Link (Part No.L1030157691ISG)

Sway Bar Link

from

$19.69
Sway Bar Link

AST – Polyurethane Sway Bar Bushing (Part No.L1050297857AST)

Polyurethane Sway Bar Bushing

from

$10.89
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

AST – Polyurethane Sway Bar Bushing (Part No.L1050650343AST)

Polyurethane Sway Bar Bushing

from

$10.68
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Terada – Sway Bar Link Bushing (Part No.L1031152450TER)

Sway Bar Link Bushing

from

$2.00
The Terada Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Terada – Sway Bar Link Bushing (Part No.L1031152453TER)

Sway Bar Link Bushing

from

$1.86
The Terada Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Most Popular 2001 Infiniti QX4 Tie Rods

Customize your Infiniti with 7 Tie Rods products like Tie Rod Ends and Center Tie Rod Ends, all priced under $54.99.

Driveworks – Steering Tie Rod End (Part No.DW-ES3466)

Steering Tie Rod End

from

$27.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

MOOG – Tie Rod End (Part No.EV396)

Tie Rod End

from

$53.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

MOOG – Tie Rod End (Part No.ES3466)

Tie Rod End

from

$54.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Driveworks – Tie Rod-Inner (Part No.DW-EV396)

Tie Rod-Inner

from

$19.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing from specific materials provides strength and durability to prevent breakage
  • Coated technology provides a smooth and durable surface to prevent corrosion and rust
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
  • A slotted nut and cotter pin for a more secure installation
See More

Beck/Arnley – Outer Tie Rod End (Part No.101-4746)

Outer Tie Rod End

from

$39.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

CTR – CTR Tie Rod End (Part No.M3010375700CTR)

CTR Tie Rod End

from

$46.59
CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.

Product Features:
  • Lower preload at assembly, less friction
  • No lubrication required in service
  • Less service wear
  • Longer service life
See More

Beck/Arnley – Inner Tie Rod End (Part No.101-4825)

Inner Tie Rod End

from

$35.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Top Picks for 2001 Infiniti QX4 Steering Shafts

Upgrade Infiniti QX4s with top-quality Steering Shafts parts, including 1 OEM and aftermarket selections for your 2001 model.

National – Multi Purpose Seal (Part No.221710)

Multi Purpose Seal

from

$6.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

In-Demand Ball Joints for 2001 Infiniti QX4s

Select from 6 premium Ball Joints parts for your 2001 Infiniti QX4, with prices ranging from $25.49 to $106.99.

Dorman – Suspension Control Arm (Part No.524-287)

Suspension Control Arm

from

$94.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.524-288)

Suspension Control Arm

from

$94.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Driveworks – Ball Joint (Part No.DW-K90662)

Ball Joint

from

$25.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

MOOG – Ball Joint (Part No.K90662)

Ball Joint

from

$106.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Sankei 555 – Ball Joint (Part No.L2020341711SNK)

Ball Joint

from

$69.94
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

TRW – Ball Joint (Part No.L2020341711TRW)

Ball Joint

from

$83.82
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

Most Sold 2001 Infiniti QX4 Power Steering Parts

Explore our best-selling Infiniti parts for the 2001 QX4 among 26 OEM and aftermarket options starting from $6.99.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5284)

Remanufactured Power Steering Pump

from

$199.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010315961MAV)

Power Steering Pump, Remanufactured

from

$313.89
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Dorman – Power Steering Rack Mount Bushings (Part No.905-402)

Power Steering Rack Mount Bushings

from

$27.99
This rack and pinion bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9322)

Rack & Pinion Bellows Kit

from

$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Powercraft – Pump Seal Kit (Part No.8942)

Pump Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Dorman – Steering Rack Bush. (Part No.M1064648319DOR)

Steering Rack Bush.

from

$74.93
Steering Rack Bush.

EMPI – Steering Rack Boot Kit (Part No.M1030157556EMP)

Steering Rack Boot Kit

from

$21.80
Steering Rack Boot Kit

Powercraft – Rack Pinion Seal Kit (Part No.8954)

Rack Pinion Seal Kit

from

$88.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Nichirin – Power Steering Pressure Line Assembly (Part No.M2015939348NIC)

Power Steering Pressure Line Assembly

from

$110.91
Nichirin is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:
  • Excellent pulsation absorption.
  • Advanced tuning design technology to be satisfied with each vehicle’s requirement
  • The choice of many premium cars – silent vehicle interior due to reduced noise transmission
  • High heat resistance
  • High-pressure durability
See More

Cardone – Steering Rack (Part No.M1000899833CAR)

Steering Rack

from

$658.17
Steering Rack

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3353N)

NEW RACK & PINION

from

$507.99
NEW RACK & PINION

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3020)

Remanufactured Rack and Pinion Assembly

from

$482.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and fun ction.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Atlantic Automotive Eng – REMAN RACK & PINION (Part No.3353)

REMAN RACK & PINION

from

$376.99
REMAN RACK & PINION

Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo – with Switch Ports (Part No.37392)

Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo - with Switch Ports

from

$226.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5568N)

NEW P/S PUMP

from

$217.99
NEW P/S PUMP

Rare Parts – Rack & Pinion Bellows (Part No.RP26645)

Rack & Pinion Bellows

from

$42.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Dorman – RACK BELLOW (Part No.541-528)

RACK BELLOW

from

$26.99
RACK BELLOW

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Top-Rated Steering and Chassis Parts Brands For Your 2001 Infiniti QX4

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2001 Infiniti QX4s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, Driveworks, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2001 QX4 start at just $13.29 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2001 Infiniti QX4 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2001 Infiniti QX4, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2001 Infiniti QX4. With over 7 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $214.37. Plus, with over 64 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Steering Rack
from
$658.17
This product is not rated

Steering Rack

“”

Remanufactured Rack and Pinion Assembly
from
$482.99
This product is not rated

Remanufactured Rack and Pinion Assembly

“”

Popular Driveworks 2001 Infiniti QX4 Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2001 Infiniti QX4 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2001 QX4, Advance Auto Parts carries a full inventory of 7 Driveworks Steering and Chassis Parts. Plus you will be keeping your Infiniti in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $13.29 to $29.99, plus, with more than 19 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

SWAY BAR BUSHING
from
$13.29
This product is not rated

SWAY BAR BUSHING

“”

Steering Tie Rod End
from
$27.49

(3)

Steering Tie Rod End

“Good”

Tie Rod-Inner
from
$19.29
This product is not rated

Tie Rod-Inner

“”

FAQs for 2001 Infiniti QX4 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2001 Infiniti QX4s?

Out of 74 Steering and Chassis Parts that fit 2001 Infiniti QX4s, the following parts are the top sellers:

What’s the price range for 2001 Infiniti QX4 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2001 Infiniti QX4 start at $1.86 and go up to $658.17 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2001 Infiniti QX4?

The average price for Steering and Chassis Parts for the 2001 Infiniti QX4 is $83.78. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Infiniti QX4 model years?

Yes, we currently carry Steering and Chassis Parts for 6 model years of Infiniti QX4s between 1997 and 2003. Steering and Chassis Parts are bought most frequently for the following model years: 2003, 2002, 2000, 1999, 1998, and 1997.

What are the cheapest Steering and Chassis Parts for my 2001 Infiniti QX4?

The cheapest 2001 Infiniti QX4 Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2001 Infiniti QX4?

Out of 132 reviews by customers, our 2001 Infiniti QX4 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2001 Infiniti QX4 and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2001 Infiniti QX4?

Can I get help with 2001 Infiniti QX4 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Steering and Chassis Parts and more.

What is your return policy for Infiniti QX4 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Infiniti QX4 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.