2001 Honda Insight Brake Parts
More 2001 Honda Insight Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 2001 Honda Insight, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 2001 Honda Insight Brake Parts
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5413)
from
$319.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-4638)
from
$129.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3370)
from
$86.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Premium – Multi Purpose Relay (Part No.RAA1238)
from
$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Wearever – Wheel Cylinder (Part No.WCA610112)
from
$30.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.
Product Features:
See More
Product Features:
- Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
- Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
- Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
- Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA610135)
from
$32.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
Product Features:
See More
Product Features:
- Wheel cylinders match what was originally installed on the vehicle.
- Each cylinder matches OE for form, fit and function and material
- Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
- All bleeder screws are coated providing extra protection
- Rubber components are manufactured in house using the latest formula EPDM material.
- Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
- All casting machining is done by computer programed CNC machines.
- Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K8343)
from
$290.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K8318)
from
$179.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K5224)
from
$119.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.
Product Features:
See More
Product Features:
- This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
- PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Multi-Layer rubberized shims provide virtually noise-free braking
- Drilled & Slotted performance rotors provide maximum cooling
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Bolt-on upgrade for stock brakes, no modifications necessary
- Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance with Calipers (Part No.KC690-26)
from
$316.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors, calipers and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! This PowerStop Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.
Product Features:
See More
Product Features:
- This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
- Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
- All calipers are powder coated, assembled, and tested in our Chicago, IL facility
- Stainless-steel pad shims resist the increased temperatures common on high performance applications
- Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
- Drilled & Slotted performance rotors provide maximum cooling
- Bolt-on upgrade for stock brakes, no modifications necessary
- Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
- Rotors are zinc plated for maximum protection against rust.
- Buy with confidence from the originator & industry leader of brake kits
Nissin – Premium OE Replacement Brake Pads (Part No.N1010283321NIS)
from
$37.51
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. The Nissin OE premium formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit application.
- Formulated to OE Specifications.
- Superior friction qualities.
- Organic compound.
Carquest Premium Gold – BRK PAD-GOLD CERAMIC (Part No.GNAD2185)
from
$54.99
BRK PAD-GOLD CERAMIC
Carquest Professional Platinum – Brake Pads With Hardware, Ceramic, Better Performance, Longer Life, Quiet (Part No.PXD465AH)
from
$62.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.
Product Features:
See More
Product Features:
- Industry-leading number of application specific formulations for maximum performance and extended pad life
- On-vehicle testing similar to original equipment tests
- Patented 4-Layer HEX Shim Technology provides quiet braking
- HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
- Burnishing compound allows for a faster break-in of pads and rotors
- PTFE coated hardware and caliper pin grease included for nearly every application
- Powder-coated backing plate prevents corrosion
Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD256)
from
$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA620744)
from
$35.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620748)
from
$40.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Dorman – Help – Disc Brake Rotor Retaining Screws (Part No.13824)
from
$4.99
This disc brake rotor set screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this disc brake rotor set screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Disc Brake Rotor Retaining Screw Assortment (Part No.13822)
from
$6.99
This disc brake rotor set screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this disc brake rotor set screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Multi Purpose Relay (Part No.RAA1255)
from
$73.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 2001 Honda Insight Brake Parts Categories
2001 Honda Insight Brake Parts
You count on your 2001 Honda Insight to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 15 Brake Parts ranging in price from $4.99 to $319.99, you’re sure to find everything you need for your 2001 Honda Insight.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 8 different brands like Cardone, Dorman, and Carquest Premium. 2001 Honda Insight Brake Parts start as low as $4.99!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 18 extensive product reviews on 2001 Honda Insight Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2001 Honda Insight below to get started!
Top-Rated Brake Parts Brands For Your 2001 Honda Insight
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Honda Insight running right for years to come. In our inventory you’ll find brands like Cardone, Dorman, Carquest Premium, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 2001 Honda Insight back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 2001 Honda Insight Brake Parts
What are the most purchased Brake Parts for the 2001 Honda Insight?
Out of 15 Brake Parts for the 2001 Honda Insight, the most popular in our inventory are:
