2001 GMC Jimmy Alternators and Starters

Essential Alternators and Starters for 2001 GMC Jimmies

Carquest Premium – Starter Solenoid (Part No.SBC3902)

Starter Solenoid

from

$104.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest – Starter Solenoid (Part No.84C1006)

Starter Solenoid

from

$33.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SBC2125)

Starter Solenoid

from

$100.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Starter Solenoid (Part No.SAC4905)

Starter Solenoid

from

$513.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Dorman – Alternator Pigtail (Part No.645-569)

Alternator Pigtail

from

$47.99
This alternator connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this alternator connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1047)

Multi-Use Connector

from

$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1117)

Multi-Use Connector

from

$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1201)

Multi-Use Connector

from

$31.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Purpose Relay (Part No.SBC2109)

Multi-Purpose Relay

from

$39.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Dorman – Ignition Lock Cylinder Assembly (Part No.989-000)

Ignition Lock Cylinder Assembly

from

$34.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Locksmart – Ignition Lock Cylinder (Part No.LC13530)

Ignition Lock Cylinder

from

$30.49
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Locksmart – Ignition Lock Cylinder (Part No.LC14220)

Ignition Lock Cylinder

from

$16.05
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSA1672)

Ignition Lock Cylinder

from

$28.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSA1734)

Ignition Lock Cylinder

from

$23.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

GM Genuine Parts – Ignition Lock Cylinder with Key (Part No.D1402B)

Ignition Lock Cylinder with Key

from

$40.99
Ignition Lock Cylinder with Key
See More

Carquest HD Electrical – Starter: New, 12V, 11 Tooth (Part No.72-3510N-PG)

Starter: New, 12V, 11 Tooth

from

$189.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance

Product Features:
  • High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
See More

Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.6469SN)

Starter: New, Limited Lifetime Warranty

from

$302.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
    • All new components are utilized to ensure long service life
    • Internal electronics are upgraded for heavy duty reliability (where applicable)
    • Armatures and commutators are 100% load tested
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6485S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$178.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Each unit is triple-tested to ensure quality and performance
    • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
    • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
    • Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
    • 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
See More

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3664S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$88.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Each unit is triple-tested to ensure quality and performance
    • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
    • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
    • Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
    • 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
See More

Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.6449SN)

Starter: New, Limited Lifetime Warranty

from

$204.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
    • All new components are utilized to ensure long service life
    • Internal electronics are upgraded for heavy duty reliability (where applicable)
    • Armatures and commutators are 100% load tested
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3508S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$88.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Each unit is triple-tested to ensure quality and performance
    • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
    • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
    • Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance.
    • 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
See More

Carquest Standard – Alternator: Remanufactured, 78 Amps, 1 Year Limited Warranty (Part No.7273-9AV)

Alternator: Remanufactured, 78 Amps, 1 Year Limited Warranty

from

$78.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet OE specifications for fit, form and function
    • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Alternator: New, 63 Amps, Limited Lifetime Warranty (Part No.7127-3AN)

Alternator: New, 63 Amps, Limited Lifetime Warranty

from

$118.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
    • All new components are utilized to ensure long service life
    • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
    • Internal electronics are upgraded for heavy duty reliability (where applicable)
    • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
    • Application-specific technical bulletins included where applicable
    • All units are 100% triple tested to ensure quality and performance
    • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
    • Rotors and stators are load tested and double insulated for maximum charging performance
See More

Carquest Standard – Alternator: Remanufactured, 63 Amps, 1 Year Limited Warranty (Part No.P7127SEAV)

Alternator: Remanufactured, 63 Amps, 1 Year Limited Warranty

from

$124.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest HD Electrical – Alternator: New, 63 Amps, With Pulley (Part No.71-7127-SEN)

Alternator: New, 63 Amps, With Pulley

from

$131.99
Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are primed to keep you moving forward. Built to perform in severe duty environments where consistent efficient high outputs are required.

Product Features:


    Product Features:
    • Contains Innovative Brush-less and Premium Brush Components that have been tested and certified for highest possible power output
    • Stator – wound to OE specifications. Heavy coated Polyester wire provides consistent conductivity
    • Premium Transpo rectifiers use 13mm press fit Diodes for maximum performance
    • Rotor shafts CNC machined & precision balanced to eliminate vibration
    • Over-Voltage shutdown limits voltage if output terminal is disconnected form the battery
    • Load dump protection ensures transient voltage spikes do not damage transistor
    • Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.
See More

Bosch – Alternator: Remanufactured, 55 Amps, 2 Year Limited Warranty (Part No.AL532X)

Alternator: Remanufactured, 55 Amps, 2 Year Limited Warranty

from

$108.99
The Bosch Premium Alternator is engineered for top-tier performance and reliability, making it a dependable choice for your vehicle’s electrical system. This remanufactured unit is not just rebuilt but meticulously crafted using high-quality materials and advanced technology to ensure long-lasting durability. With a 55-amp output and 12 VDC voltage rating, it delivers consistent power to meet your vehicle’s demands. Full-load and 100% factory testing guarantee compliance with Bosch’s stringent performance standards, so you can trust its reliability under various conditions. Designed for clockwise rotation, this alternator is a perfect fit for vehicles requiring precision and efficiency. Choose Bosch for a premium solution that combines functionality, durability, and value.

Product Features:


    Product Features:
    • Full-load tested to guarantee compliance with Bosch’s strict performance specifications
    • 100% factory tested, units are remanufactured (not rebuilt)
    • Built to last – uses high quality materials and the most technologically advanced developments.
    • Designed for precision and efficiency, ensuring optimal performance for vehicles requiring clockwise rotation.
    • Delivers consistent 55-amp output to reliably meet the electrical demands of your vehicle.
See More

Carquest Professional – Alternator: New, 100 Amps, Limited Lifetime Warranty (Part No.7861-7AN)

Alternator: New, 100 Amps, Limited Lifetime Warranty

from

$169.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
See More

Carquest HD Electrical – Alternator: New, 105 Amps, With Pulley (Part No.71-8206N)

Alternator: New, 105 Amps, With Pulley

from

$107.99
Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are pri

Product Features:
  • High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
  • Load dump protection ensures transient voltage spikes do not damage transistor
  • Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.
See More

Upgrade your 2001 GMC Jimmy with Top-Quality Alternators and Starters

When it comes to maintaining or upgrading your 2001 GMC Jimmy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Alternators and Starters are key to keeping your Jimmy functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Alternators and Starters for the 2001 GMC Jimmy, designed to meet your needs without breaking the bank. From Alternator Part replacements to Starter Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 2001 GMC Jimmy at great prices. Our Alternators and Starters inventory for this model ranges from just $20.99 to $459.99, with an average price of $129.44. Our 20 Alternators and Starters in stock come from 8 trusted brands, so you’re sure to find the right part for your 2001 GMC Jimmy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 GMC Jimmy, we stock popular OEM and aftermarket Alternators and Starters from top names like Carquest Premium, Carquest, Dorman, and more. Carquest Premium Alternators and Starters start at just $165.99 and boast an impressive 4.4 stars average rating from customers. Carquest and Dorman also bring quality to the table, with Alternators and Starters available starting at $47.99, and at an average 4.4 stars rating. With 304 customer reviews and counting, our 2001 GMC Jimmy Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 GMC Jimmy is always ready to roll. We’re committed to providing you with everything you need to keep your Jimmy in top shape, all in one place. Start shopping confidently below for your 2001 GMC Jimmy!

Best-Selling Alternator Parts for 2001 GMC Jimmies

Enhance the driving experience in your GMC with 7 quality Alternator Part components, starting at $20.99.

Dorman – Alternator Pigtail (Part No.645-569)

Alternator Pigtail

from

$47.99
This alternator connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this alternator connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Standard – Alternator: Remanufactured, 100 Amps, 1 Year Limited Warranty (Part No.8283AV)

Alternator: Remanufactured, 100 Amps, 1 Year Limited Warranty

from

$124.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty (Part No.8283A)

Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty

from

$165.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Alternator: New, 100 Amps, Limited Lifetime Warranty (Part No.8283AN)

Alternator: New, 100 Amps, Limited Lifetime Warranty

from

$181.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • All units are 100% triple tested to ensure quality and performance
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1047)

Multi-Use Connector

from

$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1117)

Multi-Use Connector

from

$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Powermaster Performance – Alternator: AD244 Style, 215 Amps, Natural Finish, With 4 Pin VR (Part No.48237)

Alternator: AD244 Style, 215 Amps, Natural Finish, With 4 Pin VR

from

$459.99
The Powermaster Alternator delivers exceptional performance and reliability, making it an ideal choice for street applications, including muscle cars, classics, street rods, and daily drivers. Engineered with an Ad244 style design, this alternator boasts superior output at idle, delivering an impressive 140 amperes for consistent power. Its heavy-duty regulator and rectifier, combined with high-temperature windings, ensure long-lasting durability and efficiency. Dual internal fans provide excellent cooling, while the late-model compatibility with remote voltage control adds modern convenience. Featuring a “Proof of Performance” tag, this alternator guarantees top-tier functionality and reliability. Whether you’re upgrading or replacing, this alternator is built to meet the demands of high-performance vehicles.

Product Features:


Product Features:
  • Ad244 Style
  • Superior Output At Idle, A Whopping 140 Ampere
  • Heavy Duty Regulator And Rectifier
  • High Temperature Windings
  • Dual Internal Fans For High Efficiency And Excellent Cooling
  • Late Model Compatibility With Remote Voltage Control
  • Proof Of Performance Tag
See More

Most Popular 2001 GMC Jimmy Starter Parts

Customize your GMC with 7 Starter Parts products like Starters, Starter Solenoids, and Starter Relays, all priced under $229.99.

Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.6485S)

Starter: Remanufactured, Limited Lifetime Warranty

from

$178.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
  • Remanufactured to meet or exceed OE specifications for fit, form, and function, ensuring reliable performance and compatibility.
  • 100% electronic testing of all critical components and the entire unit guarantees optimal functionality and durability.
See More

Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.6485SN)

Starter: New, Limited Lifetime Warranty

from

$199.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:


Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Standard – Starter: Remanufactured, 1 Year Limited Warranty (Part No.6485SV)

Starter: Remanufactured, 1 Year Limited Warranty

from

$143.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Designed to meet OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Multi-Purpose Relay (Part No.SBC2109)

Multi-Purpose Relay

from

$39.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

ACDelco – Starter: Remanufactured (Part No.336-1925A)

Starter: Remanufactured

from

$184.99
Product Features:
  • Remanufactured using consistent quality processes; not just rebuilt
  • Starters have new bronze sintered and oil-impregnated armature bushings
  • Solenoid contacts are new with copper terminals and plated hardware
  • Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications
  • Designed to meet the fit, form, and function requirements for a wide range of vehicles, including General Motors and special applications.
See More

Carquest – Multi-Purpose Relay (Part No.84C1004)

Multi-Purpose Relay

from

$21.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Bosch – Starter: Remanufactured (Part No.SR8584X)

Starter: Remanufactured

from

$229.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:
  • Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
  • Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
  • Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
  • Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
See More

Top Picks for 2001 GMC Jimmy Ignition Lock Parts

Upgrade GMC Jimmies with top-quality Ignition Lock Parts parts, including 6 OEM and aftermarket selections for your 2001 model.

Locksmart – Ignition Lock Cylinder (Part No.LC63200)

Ignition Lock Cylinder

from

$56.05
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Ignition Lock Cylinder Housing with Passlock Sensor (Part No.924-713)

Ignition Lock Cylinder Housing with Passlock Sensor

from

$149.99
Steering column jammed or ignition switch not working? This ignition lock housing is a direct replacement for an inoperable original equipment lock housing to help restore ignition lock functions.

Product Features:
  • Direct replacement – this ignition lock housing matches the fit and function of the original equipment lock housing
  • Durable materials – this lock housing is made from quality materials for reliable service
  • Easy to install – no special tools required to install this lock housing
  • Quality tested – this part has undergone vehicle try-on and material testing
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSA1482)

Ignition Lock Cylinder

from

$62.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Housing (Part No.CSC1564)

Ignition Lock Housing

from

$148.99
The ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source. The ignition lock cylinder provides security requiring an ignition key to unlock the ignition switch.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSC1633)

Ignition Lock Cylinder

from

$73.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSA2094)

Ignition Lock Cylinder

from

$49.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Top-Rated Alternators and Starters Brands For Your 2001 GMC Jimmy

Shop for the best-rated brands offering Alternators and Starters and other products for your 2001 GMC Jimmies. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium, Carquest, and Dorman, and more. Alternators and Starters from these brands that fit a 2001 Jimmy start at just $47.99 and are rated as high as 4.4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2001 GMC Jimmy Alternators and Starters

When it comes to maintaining or upgrading your 2001 GMC Jimmy, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 2001 GMC Jimmy. With over 2 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $165.99, with an average price of just $172.49. Plus, with over 63 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty
from $165.99
(35)
Alternator: Remanufactured, 100 Amps, Limited Lifetime Warranty
“Works as described.”
Starter: Remanufactured, Limited Lifetime Warranty
from $178.99
(28)
Starter: Remanufactured, Limited Lifetime Warranty
“Perfect fir . .Easy purchase . .Great price ! ! !”

Popular Carquest 2001 GMC Jimmy Alternators and Starters

Carquest auto parts is one of the highest quality Alternators and Starter brands in the market. Any 2001 GMC Jimmy owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 2001 Jimmy, Advance Auto Parts carries a full inventory of 2 Carquest Alternators and Starters. Plus you will be keeping your GMC in peak condition while saving money because prices on these Carquest Alternators and Starters range from $124.99 to $143.99, plus, with more than 168 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
Alternator: Remanufactured, 100 Amps, 1 Year Limited Warranty
from $124.99
(74)
Alternator: Remanufactured, 100 Amps, 1 Year Limited Warranty
“Good product-does the job.”
Starter: Remanufactured, 1 Year Limited Warranty
from $143.99
(94)
Starter: Remanufactured, 1 Year Limited Warranty
“great price no trobles”

FAQs for 2001 GMC Jimmy Alternators and Starters

Which Alternators and Starters are best-sellers for 2001 GMC Jimmies?

Out of 20 Alternators and Starters that fit 2001 GMC Jimmies, the following parts are the top sellers:

What’s the price range for 2001 GMC Jimmy Alternators and Starters?

Alternators and Starter prices for the 2001 GMC Jimmy start at $20.99 and go up to $459.99 for the most premium parts.

What’s the average price of a Alternators and Starter for a 2001 GMC Jimmy?

The average price for Alternators and Starters for the 2001 GMC Jimmy is $129.44. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Alternators and Starters for other GMC Jimmy model years?

Yes, we currently carry Alternators and Starters for 27 model years of GMC Jimmies between 1970 and 2000. Alternators and Starters are bought most frequently for the following model years: 2000, 1999, 1998, 1997, 1996, 1995, 1991, 1990, and 1989.

What are the cheapest Alternators and Starters for my 2001 GMC Jimmy?

The cheapest 2001 GMC Jimmy Alternators and Starters we carry in stock are:

What are the top-rated Alternators and Starters that fit the 2001 GMC Jimmy?

Out of 304 reviews by customers, our 2001 GMC Jimmy Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 2001 GMC Jimmy and their top-rated products:

What types of Alternators and Starters do you sell for my 2001 GMC Jimmy?

As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 2001 GMC Jimmy:

Can I get help with 2001 GMC Jimmy Alternators and Starter orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Alternators and Starters and more.

What is your return policy for GMC Jimmy Alternators and Starters?

Advance Auto Parts keeps returns simple. For new GMC Jimmy Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.