2001 GMC C3500HD Differentials

Essential 2001 GMC C3500HD Differentials

USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)

Master Overhaul Kit for the Dana 80 Differential (4.125" OD only).

from

$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Pinion Depth Shims For 10.5" GM 14 Bolt Truck

from

$37.99
14T GM pinion shim kit.

Product Features:
  • Pinion depth shims for GM 10.5″ 14 bolt truck
See More

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Replacement Outer Oil Baffle For Dana 80

from

$19.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 80
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

10.5" GM 14 Bolt Truck Pinion Nut

from

$48.99
10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:
  • Pinion nut for GM 10.5″ 14 bolt truck
  • 15/16″ x 16 thread
  • 1.5″ socket
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – 14T Pinion Gear Thrust Washer (Part No.33384)

14T Pinion Gear Thrust Washer

from

$8.99
14T pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)

Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down

from

$729.99
Product Features:
  • Standard open carrier case
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 and down ratio only
  • Does not include spider gears
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-903249)

Tapered Roller Bearing

from

$27.99
Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)

Replacement Spider Gear Set For Dana 80, 37 Spline

from

$318.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 80, 37 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

from

$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

Product Features:
  • Clutch kit
  • Fits GM 10.5″ 14 bolt truck with Eaton positraction
  • Carbon fiber clutches
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 80 (Part No.33018)

Replacement Outer Oil Slinger For Dana 80

from

$6.99
Product Features:
  • Outer slinger
  • Fits Dana Spicer 80
See More

Felpro – Differential Cover Gasket (Part No.RDS 55478)

Differential Cover Gasket

from

$13.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Multi Purpose Seal (Part No.100727)

Multi Purpose Seal

from

$26.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: springless; single-lip
  • Temperature range: -100°F to 450°F; -73°C to 232°C
  • Resistant to hydrocarbon/oxygenate blends and provides superior performance
  • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down (Part No.32048)

Steel Spool For GM 14 Bolt Truck With 30 Spline Axles, 4.10 & Down

from

$539.99
Yukon Performance steel spool for GM 14T with 30 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck with 30 spline axles
  • 4.10 and down ratio only or 4.56 and up thick gears
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

Differential Pinion Yoke Assembly

from

$313.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Set Up Bearing (Part No.56040)

Set Up Bearing

from

$264.99
Set-up carrier bearing kti (2 bearings, no races) for Dana 70 HD and Dana 80. 469. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 80
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Differential Cover B (Part No.33572)

Differential Cover B

from

$7.99
Differential Cover B

Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)

Chrome Replacement Cover For Dana 80

from

$69.99
Chrome replacement cover for Dana 80.

Product Features:
  • Fits Dana Spicer 80
  • Chrome
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design

from

$289.99
Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)

10.5" GM 14 Bolt Truck Crush Sleeve

from

$12.99
10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.

Product Features:
  • Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
  • 0.920″ tall
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)

Repleacement Ring Gear Bolt For Dana 80

from

$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 80
  • 9/16″ x 18 thread
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)

10.5" GM 14 Bolt Truck Ring Gear Bolt

from

$10.99
14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

Product Features:
  • Ring gear bolt for GM 10.5″ 14 bolt truck
  • 4.11 and down ratio
  • 1/2″ x 18 thread
  • 2.085″ overall length
See More

2001 GMC C3500HD Differentials

Maybe you’re in the middle of a full rebuild of that 2001 GMC C3500HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 179 different Differentials in our inventory ranging from $1.89 to $2,324.99. That means you can find the exact parts or products you need to keep that 2001 GMC C3500HD running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 2001 GMC C3500HD. Valvoline, Yukon Gear, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2001 GMC C3500HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 602 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Bearings with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 2001 GMC C3500HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2001 GMC C3500HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 GMC C3500HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 2001 GMC C3500HD, our most popular Felpro Differentials include:
Differential Cover Gasket
from $13.49
(2)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Rear Differential Cover Gaskets

Top 2001 GMC C3500HD Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 2001 GMC C3500HD. Popular Dorman parts include:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
Differential Bearing Kits

FAQs for 2001 GMC C3500HD Differentials

What are the most purchased Differentials for the 2001 GMC C3500HD?

Out of 179 Differentials for the 2001 GMC C3500HD, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings

What are the top-rated 2001 GMC C3500HD Differentials?

Top-rated Differentials for your 2001 GMC C3500HD based on customer reviews/ratings are:
Bearings
from $23.99
(7)
Bearings
“Good price”
Bearings
from $22.99
(3)
Bearings
“works great !!!”