2001 Ford Taurus Cooling and Climate Controls

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 2001 Taurus. Advance Auto Parts has popular Taurus parts like Blower Motor and Related Products, Blend Doors, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Taurus model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2001 Ford Taurus Cooling and Climate Controls below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2001 Ford Taurus Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Thermostats

ABS Control Relays

Radiator Fan Motors

Air Blend Door Actuators

AC Clutch

Coolant Reservoirs

AC Compressor Relays

Coolant Temperature Sensors

AC Condenser Fan Motors

Heater Cores

Heater Blend Doors

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

AC Harness Connectors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Line O-Rings

AC Compressor Cut-Out Relays

AC Evaporators

AC Caps and Valve Core Kits

Accumulator and Receiver Driers

AC Clutch Bearings

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

HVAC Control Vacuum Check Valves

Coolant Fan Motor Connectors

AC Switch Connectors

HVAC Binary Switches

AC Compressor Clutch Connectors

Blower Switches

Engine Coolant Water Inlets

Radiator Cap Tester Adapters

AC Compressor Seals

HVAC Temperature Control Switch Connectors

Essential Cooling and Climate Controls for 2001 Ford Tauruses

from

$87.99

New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$33.49

ACDelco Professional Multi Purpose Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$42.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$30.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Sender Assembly mounts inside a vehicle’s fuel tank and consists of the electric fuel pump and the fuel gauge sub-assembly that informs the instrument panel fuel level indicator how much fuel remains in the tank.
Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.

from

$56.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$99.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$16.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$39.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$187.99

Carquest Premium Radiators offer one of the largest product ranges in the aftermarket, covering more than 95% of the popular automotive and light truck applications. Carquest Premium Radiators meet or exceed original equipment specifications, ensuring that products fit and perform just as well or better than the original parts, providing you peace of mind.

Product Features:

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$7.99

This vacuum check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this vacuum check valve is designed to match the fit and function of the original valve on specified vehicles
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$116.99

New Platinum Pro A/C Condenser, 3.5/3.7 Liter Engines

Product Features:

3.5/3.7 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Pressure Sensor/Switch monitors the refrigerant pressure within the air conditioning system, ensuring optimal performance and preventing potential system damage, which enhances climate control and passenger comfort. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$347.99

Original engine cooling fans often burn out prematurely because they’re under-engineered for extreme duty. This Dorman OE FIX solution features a brushless motor and more durable fan blade to dramatically extend service life under intense use.

Product Features:

Upgraded design – this replacement dual radiator fan assembly features multiple enhancements over original equipment to improve longevity and performance
Ideal for law enforcement – made to endure extreme duty in specific Ford police vehicle applications
Brushless motors – upgraded designs maintain optimal speed at extreme temperatures for longer periods
Strengthened materials – designed with more durable materials to prevent fan breakage and failure

from

$23.29

Carquest A/C O-Rings and Gaskets are designed for optimal performance to protect your air conditioning parts and systems from unwanted leaks. They are designed to seal each connection with premium quality material and exact measurements.

from

$68.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$42.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$149.99

This engine coolant pipe is designed to match the fit and function of the original pipe on specified vehicles. It is engineered to help ensure leak-free coolant transfer when an original pipe has failed from heat or corrosion.

Product Features:

Direct replacement – this engine coolant pipe is designed to match the fit and function of the original pipe on specified vehicles
Ideal solution – engineered to help ensure leak-free coolant transfer when an original pipe has failed from heat or corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$31.49

High quality OE replacement part with all components needed to complete the job.

Product Features:

Durable Plastic Material
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Retainer clip installation
Durable Plastic Material
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Retainer clip installation

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$52.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$7.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$45.99

This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$90.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty
Additional Notes: Includes gasket

from

$109.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$103.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$45.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Upgrade your 2001 Ford Taurus with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2001 Ford Taurus, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Taurus functioning at its best. At Advance Auto Parts, we offer a wide selection of 112 Cooling and Climate Controls for the 2001 Ford Taurus, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2001 Ford Taurus at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $311.99, with an average price of $61.48. Our 112 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 2001 Ford Taurus without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Ford Taurus, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Felpro, Carquest Premium, Dorman, and more. Felpro Cooling and Climate Controls start at just $5.29 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $16.99, and at an average 4.4 stars rating. With 6,303 customer reviews and counting, our 2001 Ford Taurus Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Ford Taurus is always ready to roll. We’re committed to providing you with everything you need to keep your Taurus in top shape, all in one place. Start shopping confidently below for your 2001 Ford Taurus!

Best-Selling Blower Motor and Related Products for 2001 Ford Tauruses

Enhance the driving experience in your Ford with 8 quality Blower Motor and Related Product components, starting at $27.49.

show more show less

from

$34.99

Durable plastic material

Product Features:

Durable plastic material
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation
Durable plastic material
Meets all requirements of international standard ISO 140
Suitable for a wide variety of applications
Set screw installation

from

$127.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$103.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$32.99

Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$228.99

Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$157.99

Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured with high quality materials, industry-leading electronic components and strict quality controls
Extensive design validation testing and 100% end-of-line tested
Gaskets or seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$27.49

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The HVAC Panel Switch provides intuitive control over the vehicle’s heating, ventilation, and air conditioning systems, enhancing comfort for passengers by allowing easy adjustments to temperature and airflow according to individual preferences. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Most Popular 2001 Ford Taurus Blend Doors

Customize your Ford with 3 Blend Doors products like Air Blend Door Actuators and Heater Blend Doors, all priced under $163.99.

show more show less

from

$54.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$33.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$163.99

This HVAC blend door is designed to match the fit and function of the original door on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC blend door is designed to match the fit and function of the original door on specified applications
Restores functionality – reliable replacement for an original part that has cracked or failed due to vibration or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2001 Ford Taurus Heating Parts

Upgrade Ford Tauruses with top-quality Heating Parts parts, including 2 OEM and aftermarket selections for your 2001 model.

show more show less

from

$111.99

Carquest Premium heater cores use advanced engineering methods together with innovative manufacturing technology resulting in a product that meets or exceeds form, fit, and function.

Product Features:

Designed to keep your A/C system in top shape and built to provide long-lasting service.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.
Our advanced engineering methods coupled with our innovative manufacturing technology provide products to the aftermarket that meet or exceed form, fit, and function of OEM parts.

from

$7.99

This vacuum check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this vacuum check valve is designed to match the fit and function of the original valve on specified vehicles
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Engine Cooling Parts for 2001 Ford Tauruses

Select from 53 premium Engine Cooling Parts parts for your 2001 Ford Taurus, with prices ranging from $2.99 to $159.99.

show more show less

from

$16.99

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$23.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248 Deg. F
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$5.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$11.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$10.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$59.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Additional Notes: Includes gasket

from

$16.99

Cracked or lost the original engine coolant reservoir cap- Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$159.99

Our B-type tubes feature central reinforcement to provide greater tolerance to pressure. Stronger tube design means drastically reduced probability of tube failure.
Our deep extrusion header provides a stronger tube to header joint which is more resistant to the effects of vibration and thermal tube expansion, virtually eliminating tube to header leaks.
Our fin edges are folded for increased stability and heat disbursement properties.
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.
Thermal expansion cuts allow for longer life and reduce failure rates by allowing improved core expansion and contraction during normal heat cycles.
We design and manufacture all our radiators to meet or even exceed Original Equipment specifications. We take pride in producing the most reliable replacement parts in the market.
We use longer header tabs for increased pressure resistance. This reduces the potential for tank to header leaks.

from

$6.49

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$10.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$90.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
16 in. universal fit reversible fan
1400 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$75.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$52.99

This pump is used on accessory belt driven applications
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
All gaskets or seals necessary for installation are supplied with pump
Durable housing features precisely machined mounting surfaces for proper sealing
Additional Notes: Includes gasket

from

$66.99

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$149.99

Direct replacement – this engine coolant pipe is designed to match the fit and function of the original pipe on specified vehicles
Ideal solution – engineered to help ensure leak-free coolant transfer when an original pipe has failed from heat or corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$108.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Rapid-Cool Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan
Motors built and tested to quality specifications
12 in. universal fit reversible fan
800 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$7.49

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$70.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$11.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$99.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$86.99

Damaged your engine water pump pulley- This pulley is a direct replacement for the original manufacturer’s part on specific vehicle years, makes and models, restoring proper performance.

Product Features:

Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles
Durable design – built to withstand the elements and road debris
Thoroughly tested – must pass strict standards to ensure reliable longevity
Trustworthy quality – backed by team of engineers and inspectors in United States

from

$46.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Preset thermostatic fan control
185 Deg. F preset
For use with Imperial electric fans
Probe installs into radiator fins
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

from

$69.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Adjustable thermostatic fan control
160 Deg. F – 210 Deg. F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator
Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Zinc coated terminal to resist corrosion
Vehicle specific applications

Most Sold 2001 Ford Taurus Air Conditioning Parts

Explore our best-selling Ford parts for the 2001 Taurus among 46 OEM and aftermarket options starting from $0.99.

show more show less

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$60.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$109.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$107.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$21.49

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$5.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$221.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$61.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$56.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$16.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$311.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.
Light weight aluminum energy-saving casting used for construction.

from

$23.29

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$48.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple & seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. he fittings conform to OE specifications to allow for the proper fit with related A/C components.
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$299.99

As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$17.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$19.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$29.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$16.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$33.49

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$62.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$49.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top-Rated Cooling and Climate Controls Brands For Your 2001 Ford Taurus

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2001 Ford Tauruses. Below you’ll find some of our best rated Cooling and Climate Controls from Felpro, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2001 Taurus start at just $5.29 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2001 Ford Taurus Cooling and Climate Controls

When it comes to maintaining or upgrading your 2001 Ford Taurus, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Cooling and Climate Controls, specifically designed for the 2001 Ford Taurus. With over 3 Felpro brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.29, with an average price of just $7.92. Plus, with over 153 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.99

(110)

Multi-Purpose O-Ring

“It work and price was reasonable”

from $6.49

(11)

Engine Water Pump Gasket

“Glad i got on . because theone came wirh the pumpwas cracked”

from $5.29

(32)

Engine Coolant Outlet Gasket

“PERFECT FIT”

Popular Carquest Premium 2001 Ford Taurus Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2001 Ford Taurus owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2001 Taurus, Advance Auto Parts carries a full inventory of 3 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $34.99 to $109.99, plus, with more than 10 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $107.99

(1)

A/C Evaporator Core

“good item, fit like the OEM, seems to be working good too, defenetly a good price too”

from $109.99

(1)

A/C Condenser

“Fit perfect for my 1999 Ford Taurus Vin U”

from $34.99

(8)

Standard Rotation Blower Motor Wheel

“Better than original”

FAQs for 2001 Ford Taurus Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2001 Ford Tauruses?

Out of 112 Cooling and Climate Controls that fit 2001 Ford Tauruses, the following parts are the top sellers:

Multi-Purpose O-Ring (5180902) – $11.99
Standard Thermostat: 180 Degrees (5650004) – $10.99
Standard Thermostat:: 192 Degrees (11921776) – $5.79

What’s the price range for 2001 Ford Taurus Cooling and Climate Controls?

Cooling and Climate Control prices for the 2001 Ford Taurus start at $0.99 and go up to $311.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2001 Ford Taurus?

The average price for Cooling and Climate Controls for the 2001 Ford Taurus is $61.48. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford Taurus model years?

Yes, we currently carry Cooling and Climate Controls for 32 model years of Ford Tauruses between 1986 and 2019. Cooling and Climate Controls are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Cooling and Climate Controls for my 2001 Ford Taurus?

The cheapest 2001 Ford Taurus Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (Sold by each) (18890254) – $0.99
Green Round O-Ring (Sold by each) (18890169) – $1.99
THERMOSTAT O-RING (50213631) – $2.99
A/C Orifice Tube (11743737) – $3.99
Standard Thermostat: 180 Degrees (11330420) – $4.49

What are the top-rated Cooling and Climate Controls that fit the 2001 Ford Taurus?

Out of 6,303 reviews by customers, our 2001 Ford Taurus Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2001 Ford Taurus and their top-rated products:

Blower Motor and Related Products
- Standard Rotation Blower Motor Wheel (10598637) – $34.99
- Blower Motor: with Wheel (10467232) – $127.99
- Blower Motor: without Wheel (15010046) – $103.99
Blend Doors
- Standard Rotation Blower Motor Wheel (10598637) – $34.99
- Blower Motor: with Wheel (10467232) – $127.99
- Blower Motor: without Wheel (15010046) – $103.99
Engine Cooling Parts
- Standard Rotation Blower Motor Wheel (10598637) – $34.99
- Blower Motor: with Wheel (10467232) – $127.99
- Blower Motor: without Wheel (15010046) – $103.99

What types of Cooling and Climate Controls do you sell for my 2001 Ford Taurus?

As of 3/1/26, these are some of the most in-demand types of Cooling and Climate Controls for a 2001 Ford Taurus:

Can I get help with 2001 Ford Taurus Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford Taurus Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford Taurus Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Ford Taurus Cooling and Climate Controls

KAI – Coolant Reservoir (Part No.FO3014136)

ACDelco – Multi-Purpose Relay (Part No.F1757)

Motorcraft – Original Equipment (O.E.) Sender Assembly (Part No.DY-1144)

Factory Air – Green Round O-Ring (Sold by each) (Part No.24650)

Motorcraft – Original Equipment (O.E.) Sender Assembly – Temperature (Part No.SW-5174)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1505)

Carquest Premium – Multi-Use Connector (Part No.PTA1541)

Carquest Premium – Radiator (Part No.432192)

Dorman – Help – Two-Way Check Valve (Part No.47150)

KAI – A/C Condenser (Part No.CND3678)

Carquest Premium – Air Conditioner Clutch Cycle Switch (Part No.ABA1023)

Dorman – Dual Fan Assembly with Brushless Motors (Part No.621-564XD)

Carquest Premium – A/C O-Ring/Gasket Kit (Part No.T26719)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34184)

Carquest Premium – Multi-Use Connector (Part No.PTA1301)

Dorman – Engine Coolant Pipe (Part No.902-205)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35534)

Carquest – Multi-Purpose Relay (Part No.83A1001)

Carquest Premium – HVAC Control Module Connector (Part No.PTA4027)

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Dorman – Power Outlet Socket (Part No.926-331)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1182)

Dorman – Engine Coolant Water Outlet with Sensor (Part No.902-031)

Carquest Premium – Blower Motor: without Wheel (Part No.35071)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36486)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2012)

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35617)

Carquest Premium – Blower Motor: with Wheel (Part No.75889)

Carquest Premium – Blower Motor: without Wheel (Part No.35071)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1047)

Carquest Premium – Multi-Use Connector (Part No.PTC1134)

Dorman – HVAC Blower Motor Resistor (Part No.973-061)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1232)

Carquest Premium – HVAC Blower Control Switch (Part No.HKA1016)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-206)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-207)

Dorman – HVAC Blend Door: 1 Piece (Part No.902-223)

Carquest Premium – HVAC Heater Core (Part No.398336)

Dorman – Help – Two-Way Check Valve (Part No.47150)

Motorad UltraStats – UltraStat Thermostat: 192 Degrees (Part No.5244-192)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Felpro – Engine Coolant Outlet Gasket (Part No.35377)

Felpro – Multi-Purpose O-Ring (Part No.35489)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14138)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4183)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54208)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.431321)

Felpro – Engine Water Pump Gasket (Part No.35379)

Carquest Premium – Standard Reservoir Cap: 16 PSI (Part No.10238)

Imperial – Electric Fan, 16" Diameter (Part No.226116)

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-203)

Carquest Premium – Engine Water Pump_New (Part No.T1159)

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-201)

Dorman – Engine Coolant Pipe (Part No.902-205)

Imperial – Electric Fan, 12" Diameter (Part No.226112)

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.14139)

Imperial – Electric Fan, 14" Diameter (Part No.226114)

Factory Air – Engine Coolant Temperature Sensor (Part No.36447)

Dorman – Engine Water Pump Pulley (Part No.300-944)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36485)

Factory Air – System Mounted Binary Pressure Switch (Part No.20052)

Carquest Premium – A/C Condenser (Part No.1130)

Carquest Premium – A/C Evaporator Core (Part No.T54798)

Carquest Premium – A/C Orifice Tube – Automatic Adjusting (Part No.T38904)

Carquest Premium – A/C Orifice Tube – Orange (Part No.T38639)

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ FS10 Compressor (Part No.DW57168)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34166)

Carquest Premium – A/C Accumulator with Hose Assembly (Part No.T55307)

Carquest Premium – A/C Orifice Tube (Part No.T38902)

Carquest Premium – A/C Compressor, New, with Clutch, with FS10 Compressor (Part No.T58168)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26719)

Carquest Premium – A/C Liquid Line with Orifice Tube (Part No.T55822)

DENSO – A/C Compressor with Clutch – New (Part No.471-8139)