2001 Chevrolet Tahoe Drive Shafts and Axles

Essential 2001 Chevrolet Tahoe Drive Shafts and Axles

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6091)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$103.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 94-12;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1988-2012
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • WITHOUT PLATE
  • WITH STUDS
See More

Yukon Gear – 1541H Right Hand Stub Axle For ’88-’06 GM 8.25" IFS (Part No.21619)

1541H Right Hand Stub Axle For '88-'06 GM 8.25" IFS

from

$289.99
Yukon 1541H right hand stub axle for ’88-06 GM 8.25″ IFS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:
  • 28 spline
  • 15.5″ long
  • Fits GM 8.25″ IFS in 1988 – 2003 half ton truck
  • Right hand inner
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

Timken – Axle Shaft Seal (Part No.K4021211347TIM)

Axle Shaft Seal

from

$12.88
Timken understands how important seals are in the automotive industry. Leveraging our knowledge and experience with bearings, we offer a broad line of light-duty oil seals made exclusively for Timken in some of the world’s most advanced manufacturing plants.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Drive Shaft (Part No.936-058)

Rear Drive Shaft

from

$404.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-247)

Front Drive Shaft: Greaseable, Adjustable

from

$504.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

Drive Shaft Center Support

from

$42.99
Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Bearing (Part No.HB-88515)

Multi Purpose Bearing

from

$167.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Front Drive Axle Inner Shaft Housing (Part No.630-639)

Front Drive Axle Inner Shaft Housing

from

$172.99
This drive axle shaft housing is designed to match the fit of the original housing on specified vehicles. It is engineered to contain the drive axle and differential lubricant and replace a housing that is missing or has been damaged..

Product Features:
  • Direct replacement – this drive axle shaft housing is designed to match the fit and function of the factory housing on specified vehicle makes, models and years.
  • Ideal solution – engineered to contain the drive axle and differential lubricant and replace a housing that is missing or damaged by impact or from wear
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

NTN – Wheel Bearing (Part No.K8000345509NTN)

Wheel Bearing

from

$87.01
Wheel Bearing

Driveworks – Clutch Release Bearing (Part No.S-B-2010)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

Dorman – Driveshaft Slip Yoke (Part No.697-560)

Driveshaft Slip Yoke

from

$185.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – Yoke For GM 9.5" With A 1350 U/Joint Size (Part No.41077)

Yoke For GM 9.5" With A 1350 U/Joint Size

from

$209.99
Yukon yoke for GM 9.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses GM3920486 straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 9.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Carquest Premium – New CV Axle (Part No.NCV10143)

New CV Axle

from

$151.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142)

CV Axle Shaft Assembly

from

$138.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142XD)

CV Axle Shaft Assembly

from

$201.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Clutch Release Bearing (Part No.S-SCH-208)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.SCH-208)

Bearings

from

$21.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS (Part No.33369)

Stub Axle Retaining Clip Snap Ring For 8.25" GM IFS

from

$14.99
Stub axle retaining clip snap ring for 8.25″ GM IFS.

Product Features:
  • Outer axle snap ring for GM 8.25″ IFS
See More

2001 Chevrolet Tahoe Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2001 Chevrolet Tahoe. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 43 different Drive Shafts and Axles in our inventory ranging from $6.49 to $883.99. That means you can find the exact parts or products you need to keep that 2001 Chevrolet Tahoe running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2001 Chevrolet Tahoe. Carquest Premium, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2001 Chevrolet Tahoe, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,380 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 4.4 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2001 Chevrolet Tahoe rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2001 Chevrolet Tahoe Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2001 Chevrolet Tahoe demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Tahoe the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Pro-King Drive Shafts and Axles

We carry Pro-King parts in our stock across Axle Shaft Seals categories, plus more. For a 2001 Chevrolet Tahoe, our most popular Pro-King Drive Shafts and Axles include:
Differential Axle Seal
from $6.99
(1)
Differential Axle Seal
Axle Shaft Seals

Top 2001 Chevrolet Tahoe Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2001 Chevrolet Tahoe. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $138.99
(141)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 2001 Chevrolet Tahoe Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2001 Chevrolet Tahoe?

Out of 43 Drive Shafts and Axles for the 2001 Chevrolet Tahoe, the most popular in our inventory are:
Multi Purpose Seal
from $17.99
(22)
Multi Purpose Seal
Axle Shaft Seals
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports

What are the top-rated 2001 Chevrolet Tahoe Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2001 Chevrolet Tahoe based on customer reviews/ratings are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $121.99
(7)
Center Support Bearing Motor Mount: Center, 1 Piece
“This is an exact fit product. I purchased another carrier bearing at one of the competitors and it wasn’t an exact fit and my driveshaft wobbled like”
Center Support Bearing Motor Mount: Center, 1 Piece
from $92.99
(5)
Center Support Bearing Motor Mount: Center, 1 Piece
“not as beefy as the OEM but fit correctly and works as designed”
Ball Bearing
from $19.99
(5)
Ball Bearing
“Easy Installation, Exact Fit”