2001 Chevrolet Express 1500 Drivetrains

Essential 2001 Chevrolet Express 1500 Drivetrains

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-411A)

Differential Ring and Pinion

from

$179.99


Product Features:
  • GM 10BL 8.5 R/P 4.11A MG FRT/REAR
See More

Yukon Gear – Minor Install Kit For GM 9.5" Differential (Part No.12061)

Minor Install Kit For GM 9.5" Differential

from

$138.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1997 and down GM 9.5″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Dorman – Castellated Spindle Nut M20-1.25 Hex 30mm (sold by each) (Part No.615-148)

Castellated Spindle Nut M20-1.25 Hex 30mm (sold by each)

from

$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Yukon Gear – 1541H 5 Lug Inner Axle For 8.5" 2WD C10 Van (Part No.21608)

1541H 5 Lug Inner Axle For 8.5" 2WD C10 Van

from

$329.99
Yukon 1541H 5 lug inner axle for 8.5″ 2WD C10 van with a length of 33-3/8 inches and with 30 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.

Product Features:
  • 30 spline
  • 5 lug
  • 33 3/8″ long
  • Fits GM 8.5″ in 1996-2002 GM 1/2 ton 2WD truck
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)

Differential Carrier Gear Kit

from

$231.99
This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.

Product Features:
  • GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008
See More

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

1310 Lifetime U/Joint

from

$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More

GM Genuine Parts – Side Differential Bearing (Part No.S1380)

Side Differential Bearing

from

$89.99
GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Yukon Gear – Standard Open Carrier Case For ’00-’06 GM 8.6" V2 Design (Part No.20096)

Standard Open Carrier Case For '00-'06 GM 8.6" V2 Design

from

$232.99
Yukon standard open carrier case for ’00-’06 GM 8.6″, V2 – version 2 design.

Product Features:
  • Fits 2000-2006 GM 8.6″ with open differential
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)

Drive Shaft Center Support

from

$48.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

from

$24.99
Product Features:
  • Fits GM 8.6″ and 9.5″
  • Sleeve to adapt standard yoke to use late model triple lip pinion seal
See More

Pro-King – Differential Internal Nest Kit (Part No.741B717)

Differential Internal Nest Kit

from

$223.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9.5GRLMKT)

Differential Master Bearing Kit - Timken

from

$202.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM MSTR 9.5 TIMKEN 98 & LATER
See More

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)

Yoke For '98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design

from

$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1998 and up GM 9.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Yukon Gear – Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design (Part No.41071)

Yoke For 8.5" Or 8.6" GM (Mech 3R) With A U/Joint Size And Triple Lip Design

from

$226.99
Yukon yoke for 8.5″ or 8.6″ GM (mech 3R) with a U/joint size and triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 30 spline
  • Mechanics 3R u-joint size
  • 2.556″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Yukon Gear – 9.5" GM Cover Gasket (Part No.23023)

9.5" GM Cover Gasket

from

$13.99
9.5″ GM cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 9.5″
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Yukon Gear – Standard Open Cross Pin (0.795" Diameter) For 8.5" GM – Fits Some Eaton Positractions (Part No.33401)

Standard Open Cross Pin (0.795" Diameter) For 8.5" GM - Fits Some Eaton Positractions

from

$49.99
Standard open cross pin (0.795″ diameter) for 8.5″ GM. fits some Eaton positractions.

Product Features:
  • Cross pin shaft for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ diameter
See More

Yukon Gear – Cross Pin Shaft For 7.2" GM (Part No.33403)

Cross Pin Shaft For 7.2" GM

from

$53.99
Cross pin shaft for 7.2″ GM.

Product Features:
  • Cross pin shaft
  • Fits GM 7.2″ IFS
See More

Popular 2001 Chevrolet Express 1500 Drivetrains Categories

2001 Chevrolet Express 1500 Drivetrains

You count on your 2001 Chevrolet Express 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 302 Drivetrains ranging in price from $1.99 to $2,309.99, you’re sure to find everything you need for your 2001 Chevrolet Express 1500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 22 different brands like Valvoline, Moog, and Felpro. 2001 Chevrolet Express 1500 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 9,609 extensive product reviews on 2001 Chevrolet Express 1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Universal Joint with 4.1 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2001 Chevrolet Express 1500 below to get started!

Top-Rated Drivetrains Brands For Your 2001 Chevrolet Express 1500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Chevrolet Express 1500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Felpro, and even more.

Popular Powertrax Drivetrains

You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 2001 Chevrolet Express 1500 back on the road. Some of the top-rated Powertrax products in these categories are:
Grip LS Traction System
from $503.99
(1)
Grip LS Traction System
Differential Open Unit and Components

FAQs for 2001 Chevrolet Express 1500 Drivetrains

What are the most purchased Drivetrains for the 2001 Chevrolet Express 1500?

Out of 302 Drivetrains for the 2001 Chevrolet Express 1500, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Greaseable Super Strength Universal Joint
from $36.99
(41)
Greaseable Super Strength Universal Joint
U-Joints
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings

What are the top-rated 2001 Chevrolet Express 1500 Drivetrains?

Top-rated Drivetrains for your 2001 Chevrolet Express 1500 based on customer reviews/ratings are:
Greaseable Premium Universal Joint
from $19.99
(31)
Greaseable Premium Universal Joint
“Greaseable with life time warranty”
Universal Joint
from $15.99
(28)
Universal Joint
“It worked”
Differential Ring And Pinion
from $342.99
(23)
Differential Ring And Pinion
“So far so good.”