2001 BMW 325xi Fuel and Emissions Systems
More 2001 BMW 325xi Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2001 BMW 325xi, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2001 BMW 325xi Fuel and Emissions Systems
Carquest Premium – Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$39.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Vemo – Relay (Part No.P2020309952VMO)
from
$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest – Fuel Injector (Part No.63873)
from
$124.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
NTK – Switching Oxygen Sensor: 4 Wire, 19.75" Long, Heated, Direct Fit (Part No.25613)
from
$148.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6289)
from
$134.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Rein – Air Flow Meter Boot (Part No.ABV0138)
from
$18.99
Rein Automotive OE quality boots fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM.
Product Features:
See More
Product Features:
- Direct fit for easy installation.
- Manufactured with high quality materials.
- Matches original equipment design specifications.
- Resistant to heat, salt, road debris, oil and other contaminants.
Rein – Breather Hose (Part No.ABV0109R)
from
$18.99
Rein Automotive OE quality breather hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Manufactured with high quality materials.
- Direct fit for easy installation.
- Resistant to heat, salt, road debris, oil and other contaminants.
Pierburg – Air Inject Check Val (Part No.B7040269654APG)
from
$41.94
Air Inject Check Val
Rein – Hose Clamp (Part No.Y3063860432RIN)
from
$3.57
Hose Clamp
Carquest Premium – Idle Air Control Valve (Part No.AEC1126)
from
$503.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Original Equipment – AMBIENT TEMP SENSOR (Part No.P4025449414OEA)
from
$51.91
AMBIENT TEMP SENSOR
Rein – Air Pump Pipe (Part No.B6031946374RIN)
from
$38.35
Air Pump Pipe
Rein – Breather Hose (Part No.ABV0202)
from
$29.99
Rein Automotive OE quality vacuum hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Manufactured with high quality materials.
- Direct fit for easy installation.
- Resistant to heat, salt, road debris, oil and other contaminants.
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Pierburg – Secondary Air Pump (Part No.B6010298318APG)
from
$445.73
Pierburg a global supplier to European automakers manufactures an OE-equivalent direct fit Air Pump that maintains the quality and performance of the Original Equipment it replaces. Pierburg designed a modular system of brackets, and vibration absorbing elements to ensure that the secondary air pump does not interact with its mounting location.
Product Features:
See More
Product Features:
- OE design
- Low noise
- Long working life
- High thermal and mechanical resistance
- Sealed bearing design
- Housing sealed to protect against contamination
- High output DC motor
- Exact OE Body and engine mounting
Carquest Premium – Diverter Valve Gasket (Part No.ECA2998)
from
$12.49
Diverter Valve Gasket
Elring – Throttle Body Gasket (Part No.C7001267853ELR)
from
$17.94
Throttle Body Gasket
Bosch – Fuel Vapor Leak Detection Pump for Emissions Inspections (Part No.B70732233919BOS)
from
$111.58
The Bosch Fuel Vapor Leak Detection Pump ascertains leaks or related problems in the fuel system. A functional Vapor Leak Detection Pump is necessary in states that require an Emissions Inspection.
Product Features:
See More
Product Features:
- Helps to reduce atmospheric pollution due to hydrocarbon emissions
- Direct replacement for a proper fit every time
- Durable against salt, debris, and other harsh undercar conditions
- On-vehicle and laboratory testing has been conducted on this part to ensure a trouble-free performance
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2275187)
from
$248.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-419)
from
$69.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment function at a lower price
- Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
Vaico – Intake Man. Runner V (Part No.B1220334716VCO)
from
$413.02
Intake Man. Runner V
Elring – Fuel Injector Seal (Part No.C1010250108ELR)
from
$4.88
Fuel Injector Seal
Carquest Premium – Vapor Canister (Part No.CPN2233)
from
$598.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Vemo – Purge Valve (Part No.B7080267466VMO)
from
$107.53
Purge Valve
Dorman – Help – PCV System Oil Separator (Part No.46103)
from
$103.99
This engine crankcase breather hose check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine crankcase breather hose check valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Bosch – Bosch Oxygen Sensor (Part No.C5010332026BOS)
from
$164.48
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
APA/URO Parts – Vapor Canister Gromm (Part No.B7085566156APA)
from
$6.81
Vapor Canister Gromm
Popular 2001 BMW 325xi Fuel and Emissions Systems Categories
2001 BMW 325xi Fuel and Emissions Systems
You count on your 2001 BMW 325xi to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 75 Fuel and Emissions Systems ranging in price from $1.74 to $598.99, you’re sure to find everything you need for your 2001 BMW 325xi.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 19 different brands like Carquest Premium, Delphi, and Bosch. 2001 BMW 325xi Fuel and Emissions Systems start as low as $1.74!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 228 extensive product reviews on 2001 BMW 325xi Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are First Time Fit Oxygen Sensor with 4.9 stars and Oxygen Sensor: 4 Wire, 11.42" Long, Heated, Exact Fit with 4.9 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2001 BMW 325xi below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2001 BMW 325xi
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 BMW 325xi running right for years to come. In our inventory you’ll find brands like Carquest Premium, Delphi, Bosch, and even more.
Popular Cardone Fuel and Emissions Systems
You’ll find popular Cardone brand products across Fuel Injectors. All are waiting to get your 2001 BMW 325xi back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 2001 BMW 325xi, and some of our most reviewed Carquest Premium parts include:
FAQs for 2001 BMW 325xi Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2001 BMW 325xi?
Out of 75 Fuel and Emissions Systems for the 2001 BMW 325xi, the most popular in our inventory are:
What are the top-rated 2001 BMW 325xi Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2001 BMW 325xi based on customer reviews/ratings are:
from
$92.99
(2)
Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit
“Installed two in a 200 528i BMW in pre-cat application. Remove and Replace took 15 minutes for each sensor. Copper anti-seize paste was included in ”
