2000 Toyota Solara Steering and Chassis Parts

Name: Power Steering Pressure Switch
Brand: Carquest Premium
SKU: PSA1021
Price: 55.99 USD

Below you will find various in-demand Toyota Steering and Chassis Parts, components and accessories for your 2000 Solara. Advance Auto Parts has popular Solara parts like Ball Joints, Power Steering Parts, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Solara model years including 1999, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 2000 Toyota Solara Steering and Chassis Parts below and start saving instantly.

Popular 2000 Toyota Solara Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Toe Compensator Links

Tie Rod Ends

Front Alignment Kits

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Steering Knuckles

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Power Steering Reservoir Hoses

Power Steering Pump Seal Kits

Power Steering Pipes

Rack and Pinion Seal Kits

Pump Shaft Seals

Steering Gear Pitman Shaft Seals

Alignment Camber Bolt Assortments

Essential Steering and Chassis Parts for 2000 Toyota Solaras

from

$55.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$151.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$150.09

An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:

High quality plastic and/or steel construction
Easy installation
Direct replacement for a proper fit every time
Quality-tested to ensure trouble-free performance and durability

from

$29.49

Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:

Meets or exceeds OE performance specifications
Precision engineered for improved ride and superior performance
Performance tested to ensure durability

from

$23.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$224.99

Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose and line assembly
SAE J188 compliant high pressure rubber compound hose with internal noise absorber
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$129.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$72.16

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$7.99

Product Features:

Brand may vary by location

from

$71.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$107.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$27.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$39.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$36.49

3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$628.99

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
Performance testing ensures perfect fit, function and reliable performance.
Computerized spool valve balancing ensures exceptional steering feel.
Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
Built to meet or exceed O.E.M. performance.

from

$2.79

Product Features:

Brand may vary by location

from

$34.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$63.76

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$218.03

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$70.01

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$40.39

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$42.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$267.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit..

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$131.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$434.99

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$37.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$202.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

Upgrade your 2000 Toyota Solara with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Toyota Solara, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Solara functioning at its best. At Advance Auto Parts, we offer a wide selection of 138 Steering and Chassis Parts for the 2000 Toyota Solara, designed to meet your needs without breaking the bank. From Ball Joint replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Toyota Solara at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.79 to $434.99, with an average price of $83.34. Our 138 Steering and Chassis Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 2000 Toyota Solara without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Toyota Solara, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Driveworks, Cardone, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Driveworks and Cardone also bring quality to the table, with Steering and Chassis Parts available starting at $2.79, and at an average 4 stars rating. With 1,517 customer reviews and counting, our 2000 Toyota Solara Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Toyota Solara is always ready to roll. We’re committed to providing you with everything you need to keep your Solara in top shape, all in one place. Start shopping confidently below for your 2000 Toyota Solara!

Best-Selling Ball Joints for 2000 Toyota Solaras

Enhance the driving experience in your Toyota with 14 quality Ball Joint components, starting at $39.99.

show more show less

from

$167.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$167.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$61.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$39.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$171.99

CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest

Product Features:

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
Hardware included for easier installation
Product tested in accordance with SAE Spec J193, ensuring ball joint assemblies meet all requirements of the application.

from

$171.99

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
Hardware included for easier installation
Product tested in accordance with SAE Spec J193, ensuring ball joint assemblies meet all requirements of the application.

from

$127.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$127.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$187.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$187.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$95.94

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$77.61

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$66.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$55.33

Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Most Popular 2000 Toyota Solara Power Steering Parts

Customize your Toyota with 56 Power Steering Parts products like Power Steering Pumps, Power Steering Pressure Hoses, and Power Steering Return Hoses, all priced under $321.15.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$97.99

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$66.99

from

$77.99

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$28.49

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$215.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$156.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$31.99

from

$179.99

Our power steering pumps are manufactured with premium components to ensure longevity and reliability under all driving conditions. Each unit is supplied with high temperature seals and load-tested to ensure reliable performance.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$56.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$124.99

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$39.99

Rein OE Quality power steering suction hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering suction hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$64.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$59.99

Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas

from

$109.99

from

$71.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$112.40

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$36.99

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$174.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$129.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$146.54

P/S Pump

from

$104.99

Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose and line assembly
OE quality, braided rubber compound hose
Coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$104.99

A direct fit, replacement hose and line assembly
SAE J188 compliant high pressure rubber compound hose with internal noise absorber
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$107.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$55.99

from

$321.15

To ensure the highest level of performance and long service life, Omega power steering hose assemblies are built and tested to the most stringent specifications in the industry, meeting or exceeding all OEM standards.

Product Features:

OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.

from

$292.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$274.44

A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:

Protective coating applied to each unit, where applicable, to extend the life of the unit
100% performance testing to ensure perfect fit, function and reliable performance
100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
Valve housings, where applicable, have polished micro-finish sleevings for durability
Built to meet or exceed O.E.M. performance

from

$273.98

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$265.35

P/S Pressure Hose

from

$227.49

P/S Return Hose

from

$213.99

NEW P/S PUMP

from

$199.99

NEW P/S PUMP

from

$198.72

Although no plastic fluid reservoir is completely immune to the conditions that cause cracking, some are less susceptible than others. Dorman uses tough blow-molded plastic for Dorman’s Power Steering Reservoir, steeling it against coolant corrosion, fluid freezing, or exposure to extreme under hood heat.

Product Features:

Includes reservoir cap and level sensor (where applicable)
Direct replacement for a proper fit every time
Weather-resistant
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$184.99

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose and line assembly
SAE J188 compliant high pressure rubber compound hose with internal noise absorber
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$149.99

Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, preassembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement line assembly
SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

from

$134.25

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$106.26

P/S Return Hose

from

$81.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose and line assembly
OE quality, braided rubber compound hose
Coated, rust resistant heavy duty tubing and end fittings
Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
Pre attached protective jacket(s) and heat sleeve(s), where required

Top Picks for 2000 Toyota Solara Tie Rods

Upgrade Toyota Solaras with top-quality Tie Rods parts, including 13 OEM and aftermarket selections for your 2000 model.

show more show less

from

$60.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$23.99

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$27.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$62.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$81.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$84.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$78.63

Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$42.75

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$101.87

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$70.18

TIE ROD END

from

$42.49

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$37.49

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$35.63

Tie Rod End

In-Demand Sway Bars for 2000 Toyota Solaras

Select from 39 premium Sway Bars parts for your 2000 Toyota Solara, with prices ranging from $10.29 to $165.99.

show more show less

from

$12.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$68.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$52.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$31.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$43.49

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$27.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$43.49

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$115.52

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$15.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$51.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$25.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$28.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$52.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$38.69

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$38.05

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$10.29

Sway Bar Link Bushing Kit

from

$23.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$40.83

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$40.39

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$79.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$72.16

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$62.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Corrosion resistant coatings
Includes components and hardware necessary for a complete replacement
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$62.99

Matches OE form, fit and function
Corrosion resistant coatings
Includes components and hardware necessary for a complete replacement
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$52.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$42.03

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$39.49

ACDelco Advantage Suspension Stabilizer Bar Links connect the ends of your vehicle’s stabilizer bar near the wheels, and allow the bar to function in controlling body roll. These replacement components contain a forged CNC-machined shell, compressed bushing material, case-hardened studs, and constant-torque pivot joints for high-quality performance, strength, and durability. ACDelco Advantage Suspension Stabilizer Bar Links offer quality at an economical price.

Product Features:

Undergo impact, wear, and fatigue testing to help ensure quality and durability
Coated for corrosion resistance and long life
Greasable design where applicable, for easy maintenance and longevity
Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
Forged CNC-machined shell provides high-quality, precision-made performance and additional strength
Case-hardened studs with rolled threads for strength and cleanliness
Heat-treated forging for enhanced part quality and durability

from

$37.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$26.22

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$24.99

Allows Sway Bar System to Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$23.99

Allows Sway Bar System to Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$23.99

Allows Sway Bar System to Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.93

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$20.49

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$16.32

Sway Bar Bushing, Polyurethane

from

$15.99

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

from

$15.72

The MTC Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$15.48

The JCC Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$14.49

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

Most Sold 2000 Toyota Solara Steering Shafts

Explore our best-selling Toyota parts for the 2000 Solara among 3 OEM and aftermarket options starting from $2.79.

show more show less

from

$2.79

Product Features:

Brand may vary by location

from

$267.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$7.99

Product Features:

Brand may vary by location

Top-Rated Steering and Chassis Parts Brands For Your 2000 Toyota Solara

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2000 Toyota Solaras. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Cardone, and more. Steering and Chassis Parts from these brands that fit a 2000 Solara start at just $2.79 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2000 Toyota Solara Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Toyota Solara, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2000 Toyota Solara. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Popular Driveworks 2000 Toyota Solara Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2000 Toyota Solara owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2000 Solara, Advance Auto Parts carries a full inventory of 12 Driveworks Steering and Chassis Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $2.79 to $43.49, plus, with more than 135 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$10.29

This product is not rated

Sway Bar Link Bushing Kit

“”

from
$2.79

This product is not rated

Oil Seal

“”

from
$21.79

This product is not rated

Control Arm Cam Bolt Kit

“”

FAQs for 2000 Toyota Solara Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2000 Toyota Solaras?

Out of 138 Steering and Chassis Parts that fit 2000 Toyota Solaras, the following parts are the top sellers:

New Power Steering Filter (10417593) – $31.99
SWAY BAR LINK KIT 1 EA DRIVE (15511151) – $31.49
Steering Tie Rod End (15510368) – $27.99

What’s the price range for 2000 Toyota Solara Steering and Chassis Parts?

Steering and Chassis Part prices for the 2000 Toyota Solara start at $2.79 and go up to $434.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2000 Toyota Solara?

The average price for Steering and Chassis Parts for the 2000 Toyota Solara is $83.34. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Toyota Solara model years?

Yes, we currently carry Steering and Chassis Parts for 9 model years of Toyota Solaras between 1999 and 2008. Steering and Chassis Parts are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, and 1999.

What are the cheapest Steering and Chassis Parts for my 2000 Toyota Solara?

The cheapest 2000 Toyota Solara Steering and Chassis Parts we carry in stock are:

Oil Seal (10426036) – $2.79
POWER STEERINGFILTER (50167394) – $6.99
Camshaft Seal (11493993) – $7.99
Sway Bar Link Bushing Kit (10903499) – $10.29
Mounting Kit System (6014844) – $11.49

What are the top-rated Steering and Chassis Parts that fit the 2000 Toyota Solara?

Out of 1,517 reviews by customers, our 2000 Toyota Solara Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2000 Toyota Solara and their top-rated products:

Chassis
- Suspension Toe Link (10055052) – $71.99
Tie Rods
- Suspension Toe Link (10055052) – $71.99

What types of Steering and Chassis Parts do you sell for my 2000 Toyota Solara?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2000 Toyota Solara:

Can I get help with 2000 Toyota Solara Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Steering and Chassis Parts and more.

What is your return policy for Toyota Solara Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Toyota Solara Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Toyota Solara Steering and Chassis Parts

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1021)

Cardone New – New Power Steering Pump (Part No.96-5263)

Cardone – New Power Steering Filter (Part No.20-0038F)

Dorman – Power Steering Pump Pulley (Part No.M2060684418DOR)

Driveworks – Camber Bolt Kit (Part No.DW-K929)

Driveworks – Steering Tie Rod End (Part No.DW-EV301)

Rein – Power Steering High Press Feed Rtn Assembly (Part No.PSH0383)

Dorman – Power Steering Reservoir: White; Blue; Black, Plastic, Original Equipment Replacement (Part No.603-670)

TRW – Stabilizer Link (Part No.L1030140504TRW)

Driveworks – Camshaft Seal (Part No.S-223010)

Dorman – Suspension Toe Link (Part No.905-806)

Powercraft – Rack Pinion Seal Kit (Part No.8790)

MOOG – Camber Adjusting Kit (Part No.K90475)

Rein – Power Steering Suction Hose (Part No.PSH0408)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Cardone New – New Rack and Pinion Assembly (Part No.97-2606)

Driveworks – Oil Seal (Part No.S-221820)

Driveworks – Ball Joint (Part No.DW-K90346)

AST – Polyurethane Trailing Arm Bushing (Part No.L2006648527AST)

Rein – Automotive Power Steering Pipe (Part No.M2028125528RIN)

Sankei 555 – Ball Joint (Part No.L20201453818SNK)

Sankei 555 – Sway Bar Link (Part No.L1030146549SNK)

Rare Parts – Tie Rod End (Part No.RP27409)

Dorman – Intermediate Steering Shaft (Part No.425-457)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620334)

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

MOOG – Stabilizer Bar Bushing Kit (Part No.K90526)

Carquest Premium – Power Steering Return Hose, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.38659)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620578)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620579)

MOOG – Ball Joint (Part No.K9499)

Driveworks – Ball Joint (Part No.DW-K9499)

Carquest Premium – Control Arm with Ball Joint (Part No.810-680447B)

Carquest Premium – Control Arm with Ball Joint (Part No.810-680446B)

Dorman – Suspension Control Arm (Part No.524-138)

Dorman – Suspension Control Arm (Part No.524-137)

Rare Parts – Control Arm with Ball Joint (Part No.RP12102)

Rare Parts – Control Arm with Ball Joint (Part No.RP12103)

TRW – Ball Joint (Part No.L2020124715TRW)

Sankei 555 – Ball Joint (Part No.L2020124715SNK)

Rare Parts – Ball Joint (Part No.RP10710)

CTR – Ball Joint (Part No.L2020124715CTR)

Cardone – Power Steering Filter (Part No.20-0058F)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Female "O" Ring (Part No.36552)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Male "O" Ring (Part No.37246)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Female S.A.E. – with Switch Port (Part No.36876)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – Power Steering Pressure Tube, 16mm Male "O" Ring x 16mm Male "O" Ring (Part No.36307)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Remanufactured Power Steering Pump (Part No.21-5931)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Cardone – Remanufactured Power Steering Pump (Part No.21-5876)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest Premium – Power Steering Return Tube Assembly, 17mm Male "O" Ring x 3/8" Beaded Tube (Part No.36557)

Carquest Premium – New Power Steering Pump (Part No.98-5931CQ)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest – Power Steering Pressure Switch (Part No.PS200)

Dorman – Power Steering Reservoir: Gray And White, Plastic, Original Equipment Replacement (Part No.603-671)

Rein – Power Steering Suction Hose (Part No.PSH0381)

Powercraft – Pump Seal Kit (Part No.8798)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37960)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Female "O" Ring (Part No.36553)

Carquest Premium – Power Steering Return Hose, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.38657)

Rein – Power Steering Return Line Assembly (Part No.M20161373818RIN)

Rein – P/S SUCTION HOSE (Part No.PSH0431)

Dorman – Power Steering Pump Pulley (Part No.300-401)

Cardone New – New Power Steering Reservoir (Part No.3R-108)

Cardone – P/S Pump (Part No.M2010901382CAR)

Rein – Power Steering Return Hose Assembly (Part No.PSH0384)

Rein – Power Steering High Press Feed Rtn Assembly (Part No.PSH0329)

Powercraft – Rack Pinion Seal Kit (Part No.8790)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1021)

Omega – Power Steering Pressure Line Hose Assembly (Part No.M2015130580OME)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1619)

Cardone – Rack and Pinion – Remanufactured (Part No.M1000835464CAR)