2000 Subaru Legacy Engine Parts

Essential Engine Parts for 2000 Subaru Legacies

Carquest Premium – Oil Filler Cap (Part No.10110)

Oil Filler Cap

from

$11.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:
  • Provides proper seal to ensure leak prevention
  • Stops engine blow by
  • High quality construction
  • Meets all OEM specifications
See More

ContiTech – Premium Timing Belt Kit (Part No.A5006270244CON)

Premium Timing Belt Kit

from

$361.80
ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Low noise operation.
  • Resistant to high temperatures.
  • Durable long life performance.
See More

Dayco – Premium Timing Belt, 88.51 Inch With 281 Round Tooth (Part No.95328)

Premium Timing Belt, 88.51 Inch With 281 Round Tooth

from

$85.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • Timing marks are applied on the belt for proper installation
See More

Nippon Reinz – Oil Filler Tube Seal (Part No.A6142117629NRZ)

Oil Filler Tube Seal

from

$2.76
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More

Dayco – Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality (Part No.85043)

Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality

from

$91.99
Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:
  •  Designed to dampen noise and enhance belt life
  •  Keeps belt tension at a constant level for better performance
  •  Meets OE fit, form and function criteria
  • Prevents belt flapping
See More

Sealed Power – Engine Gasket Set (Part No.260-1852)

Engine Gasket Set

from

$199.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Each 260 gasket set includes Fel-Pro½ gaskets (# 1 brand of gaskets)
  • Provides the exact gaskets the application requires.
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Mahle – CLEVITE Main Bearing Set (Part No.A2010248848MAH)

CLEVITE Main Bearing Set

from

$119.63
Clevite is the number one name in replacement engine bearings, delivering on the track and in machine shops around the country. As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite BiMetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time. Clevite BiMetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These BiMetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite BiMetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an umbrella groove that allows for superior oil control and improved pressure.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Fatigue-Resistant, adaptable
  • Resistant to Wear and Corrosion
  • Advanced Surface Coatings
See More

Dorman – Camshaft Position Sensor (Part No.907-846)

Camshaft Position Sensor

from

$87.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Ishino Stone – Valve Cover Seal Washer (Part No.A8033104702ISH)

Valve Cover Seal Washer

from

$2.20
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets and seals since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26415 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Spartan – Engine Long Block; Subaru EJ22E Engine (Part No.709F)

Engine Long Block; Subaru EJ22E Engine

from

$3089.99
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:
  • Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
  • Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
  • Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
  • Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
See More

Dorman – Harmonic Balancer Assembly (Part No.594-129)

Harmonic Balancer Assembly

from

$71.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:
  • Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
  • Durable construction – stringent specifications and careful construction help ensure longevity
  • Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Oil Pump Seal (Part No.S-710236)

Oil Pump Seal

from

$2.69
Product Features:
  • Brand may vary by location
See More

Ishino – Timing Cover Grommet (Part No.A5070117634ISH)

Timing Cover Grommet

from

$3.02
Timing Cover Grommet

Dayco – Timing Belt Kit With Water Pump (Part No.WP277K3A)

Timing Belt Kit With Water Pump

from

$522.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • Includes premium Dayco components and a tough, wear-resistant belt
See More

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Ultra-Cool Engine Oil Cooler Kit

from

$184.99
Product Features:
  • Size: 3/4 in. x 10 in. x 12-1/4 in.
  • Medium duty applications
  • All except Chevrolet V8 applications
  • Two-pass design for increased cooling
See More

Ishino Stone – Crankcase O-Ring (Part No.A1021344788ISH)

Crankcase O-Ring

from

$6.61
Crankcase O-Ring

Ishino Stone – Cylinder Head Gasket Set (Part No.A8010455610ISH)

Cylinder Head Gasket Set

from

$258.00
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
  • Most gasket sets include components needed for a complete overhaul
See More

Ishino – Crankcase O-Ring (Part No.A1021325383ISH)

Crankcase O-Ring

from

$4.06
Crankcase O-Ring

Ishino – Timing Cover Gasket (Part No.A8050117691ISH)

Timing Cover Gasket

from

$8.31
Timing Cover Gasket

Carquest Premium – Crankshaft Sensor (Part No.CSC1104)

Crankshaft Sensor

from

$33.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Dorman – Engine Oil Separator Cover (Part No.917-034)

Engine Oil Separator Cover

from

$26.49
This engine oil separator cover is designed to match the fit and function of the original cover on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this engine oil separator cover is designed to match the fit and function of the original cover on specified vehicles.
  • Restores functionality – this cover is made to fit and fully restore part functionality after the original cover fails.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MAHLE Original – Camshaft Seal (Part No.67807)

Camshaft Seal

from

$5.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Dorman – Engine Oil Pan: Direct Fit, Steel, Front Sump, 6.9 Quart (Part No.264-152)

Engine Oil Pan: Direct Fit, Steel, Front Sump, 6.9 Quart

from

$126.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this engine oil pan is made to match the original pan on specific vehicles.
  • Complete assembly – includes replacement pan and drain plugs to match original components.
  • Durable design – high-strength coating prevents future corrosion
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Nippon Reinz – Nippon Reinz Engine Gasket Set (Part No.A8000117670NRZ)

Nippon Reinz Engine Gasket Set

from

$224.86
WARNING: This item cannot be returned for a replacement or refund if opened! Nippon Reinz uses state-of-the-art equipment and manufacturing processes to produce multi-layer cylinder-head gaskets for light- and commercial-vehicle engines. Innovative product design and high quality materials allows us to provide Nippon Reinz gaskets to meet specific engine requirements. The Nippon Reinz global team of experienced engineers works with all engine types and configurations to offer the best sealing solution for specific applications.

Product Features:
  • Improved reliability, durability, and engine performance
  • Reduced oil consumption and bore distortion
  • Adaptive fluoroelastomer (FKM) coating flows to seal rougher surface finishes
  • Embossment shapes designed to improve durability
  • Adaptable design by number of layers
  • Stopper layer can be designed with topography to optimize load balance
See More

FAG US – GENERAL SEAL (Part No.SS2376)

GENERAL SEAL

from

$14.29
GENERAL SEAL

Nippon Reinz – Exh. Man. to Pipe Ga (Part No.H4003117697NRZ)

Exh. Man. to Pipe Ga

from

$11.10
Exh. Man. to Pipe Ga

Upgrade your 2000 Subaru Legacy with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2000 Subaru Legacy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Engine Parts are key to keeping your Legacy functioning at its best. At Advance Auto Parts, we offer a wide selection of 97 Engine Parts for the 2000 Subaru Legacy, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2000 Subaru Legacy at great prices. Our Engine Parts inventory for this model ranges from just $2.01 to $3,894.99, with an average price of $121.78. Our 97 Engine Parts in stock come from 32 trusted brands, so you’re sure to find the right part for your 2000 Subaru Legacy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Subaru Legacy, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Dayco, Carquest Premium, and more. FELPRO Engine Parts start at just $5.49 and boast an impressive 5 stars average rating from customers. Dayco and Carquest Premium also bring quality to the table, with Engine Parts available starting at $11.99, and at an average 5 stars rating. With 1,516 customer reviews and counting, our 2000 Subaru Legacy Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Subaru Legacy is always ready to roll. We’re committed to providing you with everything you need to keep your Legacy in top shape, all in one place. Start shopping confidently below for your 2000 Subaru Legacy!

Best-Selling Camshafts for 2000 Subaru Legacies

Enhance the driving experience in your Subaru with 12 quality Camshaft components, starting at $3.29.

Carquest Premium – Camshaft Sensor (Part No.CSC1186)

Camshaft Sensor

from

$53.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Felpro – CIRCULAR PLUG (Part No.ES 72418)

CIRCULAR PLUG

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Shaft Repair Sleeve (Part No.99196)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS10037)

Engine Camshaft Position Sensor

from

$127.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

Dorman – Camshaft Position Sensor (Part No.907-846)

Camshaft Position Sensor

from

$87.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

#N/A – Camshaft Position Se (Part No.A4015401242WKR)

Camshaft Position Se

from

$47.17
Camshaft Position Se

Mahle – Camshaft Seal (Part No.A8080102364MAH)

Camshaft Seal

from

$12.27
Camshaft Seal

FAG US – GENERAL SEAL (Part No.SS2343)

GENERAL SEAL

from

$11.29
GENERAL SEAL

NOK – Camshaft Seal, OEM (Part No.A8080102364NOK)

Camshaft Seal, OEM

from

$8.61
Camshaft Seal, OEM

Nippon Reinz – Nippon Reinz Cam Plug (Part No.A8031259668NRZ)

Nippon Reinz Cam Plug

from

$5.69
Innovative product design and high quality materials allows us to provide Victor Reinz gaskets to meet specific engine requirements. The Dana global team of experienced engineers works with all engine types and configurations to offer the best sealing solution for specific applications.

Product Features:
  • Improved reliability, durability, and engine performance
  • Embossment shapes designed to improve durability
See More

Driveworks – Oil Seal (Part No.S-223230)

Oil Seal

from

$3.29
Product Features:
  • Brand may vary by location
See More

Most Popular 2000 Subaru Legacy Engine Gaskets and Seals

Customize your Subaru with 18 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $138.99.

Felpro – VALVE COVER GASKET SET (Part No.VS 50561 R)

VALVE COVER GASKET SET

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Oil Pan Gasket Set: Cork-Rubber, 3 Piece Set (Part No.OS 30656 C)

Oil Pan Gasket Set: Cork-Rubber, 3 Piece Set

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72814)

Engine Valve Stem Oil Seal Set

from

$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Ishino Stone – Timing Cover Gasket (Part No.A8050117695ISH)

Timing Cover Gasket

from

$24.61
Timing Cover Gasket

Felpro – Gasket Kit (Part No.260-1852)

Gasket Kit

from

$138.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Ishino Stone – Valve Cover Gasket (Part No.A8030161257ISH)

Valve Cover Gasket

from

$15.40
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Ishino – Timing Cover Gasket (Part No.A8050117641ISH)

Timing Cover Gasket

from

$12.48
Timing Cover Gasket

Nippon Reinz – Exh. Man. to Pipe Ga (Part No.H4003117697NRZ)

Exh. Man. to Pipe Ga

from

$11.10
Exh. Man. to Pipe Ga

Ishino – Timing Cover Gasket (Part No.A8050325621ISH)

Timing Cover Gasket

from

$10.67
Timing Cover Gasket

Ishino Stone – Timing Cover Gasket (Part No.A80501615476ISH)

Timing Cover Gasket

from

$9.69
Timing Cover Gasket

Elring – Valve Stem Seal (Part No.A8070180416ELR)

Valve Stem Seal

from

$6.85
Valve Stem Seal

Ishino – Crankcase O-Ring (Part No.A1021142813ISH)

Crankcase O-Ring

from

$5.84
Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets. Do NOT confuse this o-ring for the 80691 9050, which is smaller & req. 3. This one only requires 1 per engine and is much larger than the 80691 9050. OD is 39 mm. This is also used between the crankcase halves.
See More

Victor Reinz – Engine Oil Cooler Seal (Part No.71-11467-00)

Engine Oil Cooler Seal

from

$4.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Nippon Reinz – Oil Pan Gasket (Part No.A6130302482NRZ)

Oil Pan Gasket

from

$3.54
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. This engine does not use a gasket between the oil pan and the block, except for this o-ring located in the right rear corner of the oil pan. Use the appropriate liquid gasket sealant to seal the joint along the perimeter of the oil pan.
See More

Ishino – Valve Stem Seal, Intake (Part No.A8070180419ISH)

Valve Stem Seal, Intake

from

$3.31
Valve Stem Seal, Intake

Nippon Reinz – Oil Filler Tube Seal (Part No.A6142117629NRZ)

Oil Filler Tube Seal

from

$2.76
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More

Nippon Reinz – Victor Reinz Crankcase O-Ring (Part No.A1021247943NRZ)

Victor Reinz Crankcase O-Ring

from

$2.31
The most important types of dynamic seals are oil seals for use on rotating shafts, and valve stem seals for reducing the flow of oil through the cylinder-head into the combustion chamber. In addition to simple oil seals and integrated radial oil seals, VICTOR REINZ offers a new generation of PTFE radial oil seals. Modern engine concepts require solutions for dynamic seals, which are able to withstand the high loads lastingly. Thanks to outstanding properties, PTFE meets these demands – the best prerequisites for series use in modern engines.

Product Features:
  • OE Quality
  • PTFE technology
  • Withstands high loads
See More

Ishino Stone – Oil Pick-up Tube O-R (Part No.A6272342724ISH)

Oil Pick-up Tube O-R

from

$2.01
Oil Pick-up Tube O-R

Top Picks for 2000 Subaru Legacy Valve Cover and Cylinder Heads

Upgrade Subaru Legacies with top-quality Valve Cover and Cylinder Heads parts, including 8 OEM and aftermarket selections for your 2000 model.

Felpro – Cylinder Head Gasket Set (Part No.HS 26170 PT-1)

Cylinder Head Gasket Set

from

$162.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
  • MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26415 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72212)

CYLINDER HEAD BOLT SET

from

$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Ishino Stone – Cylinder Head Gasket (Part No.A8100949274ISH)

Cylinder Head Gasket

from

$61.09
ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

Original Equipment – Cylinder Head Gasket Set (Part No.A8010118187OEA)

Cylinder Head Gasket Set

from

$226.56
WARNING: This item cannot be returned for a replacement or refund if opened! The Original Equipment head gasket set is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality
  • Improved reliability, durability, and engine performance
  • Reduced oil consumption
  • Embossment shapes designed to improve durability
  • Adaptable design by number of layers
See More

Spartan – Engine Cylinder Head; Subaru EJ25E 99-06 RT Head (Part No.2713R)

Engine Cylinder Head; Subaru EJ25E 99-06 RT Head

from

$661.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Subaru EJ25E 99-02 LFT Head (Part No.2713L)

Engine Cylinder Head; Subaru EJ25E 99-02 LFT Head

from

$526.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Ishino Stone – Valve Cover Seal Washer (Part No.A8033104702ISH)

Valve Cover Seal Washer

from

$2.20
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets and seals since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:
  • Superb quality and precision manufacturing process to ensure overall sealing dependability
  • Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
  • Manufactured to exact OEM specifications
See More

In-Demand Engine Mounts for 2000 Subaru Legacies

Select from 6 premium Engine Mounts parts for your 2000 Subaru Legacy, with prices ranging from $41.99 to $154.99.

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9024)

Engine Mount: Front Left, Front Right, 1 Piece

from

$41.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SAAB 05-06; SUBA 93-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1993-2021
  • Weight approx: 3 Lbs
See More

Anchor – Engine Mount: Front Left, 1 Piece (Part No.9835)

Engine Mount: Front Left, 1 Piece

from

$154.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 00-06;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2006
  • Weight approx: 3 Lbs
  • PART GROUP: 9835, 9836
See More

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9836)

Engine Mount: Front Right, 1 Piece

from

$109.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SUBA 00-06;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2006
  • Weight approx: 3 Lbs
  • PART GROUP: 9835, 9836
See More

Autopart International Inc – Engine Mount (Part No.A7000566790API)

Engine Mount

from

$70.99
Engine Mount

DEA – Engine Mount (Part No.A7000454402DEA)

Engine Mount

from

$63.26
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:
  • USA Development and OEM laboratory – 14 OEM Engineers
  • Design Solutions and Installation Enhancements to Failing OEM designs
  • Complete Factory Testing and Vehicle Verification Resources
See More

Beck/Arnley – Engine Mount (Part No.104-1336)

Engine Mount

from

$41.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
  • Premium materials to dampen vibration
  • Additional factory parts included where applicable
  • Designed for underhood conditions
  • Application specific for this vehicle
See More

Most Sold 2000 Subaru Legacy Engine Timing Parts

Explore our best-selling Subaru parts for the 2000 Legacy among 19 OEM and aftermarket options starting from $3.02.

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2254)

Engine Water Pump: New, Gasket/Seals Included

from

$71.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46008)

Engine Camshaft Seal Kit

from

$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dayco – Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers (Part No.WP307K1A)

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers

from

$341.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • Includes premium Dayco components and a tough, wear-resistant belt
See More

Dayco – Premium Timing Belt, 70.24 Inch With 223 Round Tooth (Part No.95307)

Premium Timing Belt, 70.24 Inch With 223 Round Tooth

from

$71.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:
  • Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
  • Offers noise reduction and minimum dimensional tolerances for precise valve timing
  • Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
  • Timing marks are applied on the belt for proper installation
See More

Dayco – Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 3 Idlers, 6 Piece Set (Part No.95307K1)

Timing Belt Kit; With Belts, Camhaft Belt Tensioner And 3 Idlers, 6 Piece Set

from

$364.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and tough, wear-resistant belt
See More

Dayco – Timing Component Kit; With Tensioner And 3 Camshaft Belt Idlers, 5 Piece Set (Part No.84105)

Timing Component Kit; With Tensioner And 3 Camshaft Belt Idlers, 5 Piece Set

from

$256.99
Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:
  • Engineered for the majority of domestic and import vehicle applications with a timing belt
  • All components needed for a complete timing belt replacement included in one box
  • Includes premium Dayco components and a tough, wear-resistant belt
  • Meets or exceeds OE quality
See More

Dayco – Timing Camshaft Belt Tensioner; 1 Piece, Built To Outperform And Outlast OE (Part No.85065)

Timing Camshaft Belt Tensioner; 1 Piece, Built To Outperform And Outlast OE

from

$196.99
Dayco offers a complete line of single-and double-eccentric mechanical camshaft belt tensioners. These tensioners are optimized for each application and consider specific driving behavior to ensure a lifetime of smooth operation.

Product Features:
  • Designed to keep the timing belt tightly in place for optimum performance
  • Made from OE quality materials to ensure smooth operation
  • Works with the timing belt to enhance system durability
  • Prevents belt flapping
See More

NTN – Timing Belt Tensioner Assembly (Part No.A5028230406NTN)

Timing Belt Tensioner Assembly

from

$115.28
The NTN Timing Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality sealed precision bearing assembly
  • OE specified pulley
  • Durable long life performance
See More

GMB – Timing Belt Idler (Part No.A5291131788GMB)

Timing Belt Idler

from

$49.86
GMB is one of the world’s largest designers and manufacturers of automotive service products. GMB offers OE quality water pumps, universal joints, tensioner idler bearings and chassis parts for most European, Asian and Domestic vehicles.
See More

Carquest Premium – Center High Mount Stop Light Connector (Part No.PTA1472)

Center High Mount Stop Light Connector

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NSK – Timing Belt Idler (Part No.A529197812NSK)

Timing Belt Idler

from

$23.71
Timing Belt Idler

Gates – Timing Belt Kit (Part No.A50061064433GAT)

Timing Belt Kit

from

$441.35
Timing Belt Kit

ContiTech – Premium Timing Belt Kit (Part No.A5006232846CON)

Premium Timing Belt Kit

from

$400.46
ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision molded teeth.
  • Low noise operation.
  • Resistant to high temperatures.
  • Durable long life performance.
See More

Dayco – Timing Belt Kit With Water Pump (Part No.WP307K1AS)

Timing Belt Kit With Water Pump

from

$286.99
Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:
  • Engineered for both domestic and import vehicle applications with a timing belt
  • Includes premium Dayco components and a tough, wear-resistant belt
See More

Mitsubishi – Mitsuboshi Timing Belt (Part No.A5000111734MBL)

Mitsuboshi Timing Belt

from

$64.73
The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:
  • High-tensile strength Carbon Cord
  • Abrasion resistant
  • High elasticity, high hardness HNBR rubber
  • Increased durability
  • Reduced noise
  • Rubber construction for superior flexibility
  • Special low friction tooth fabric
See More

Koyo – Timing Belt Idler, Double Style Bearing (Part No.A529132588KOY)

Timing Belt Idler, Double Style Bearing

from

$42.70
Koyo Seiko Co., Ltd. (JTECT Corporation) designs, manufacturers and supplies a wide range of ball and roller bearings to the world’s leading automotive manufacturers. When replacing an earlier design idler on some older engines with this later design bearing, a different length retaining bolt may be required.
See More

Dorman – Timing Cover Bolt Kit (Part No.926-386)

Timing Cover Bolt Kit

from

$27.49
This engine timing cover bolt set is designed to match the fit and function of the factory bolt set on specified vehicles. The bolts are engineered to help secure the timing cover and replace rusted or missing factory bolts..

Product Features:
  • Direct replacement – the bolts in this engine timing cover bolt set are designed to match the fit and function of the factory bolts on specified vehicle makes, years and models.
  • Ideal solution – engineered to help secure the timing cover to the engine block or cylinder head and replace rusted or missing factory bolts
  • Durable construction – made of quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

FAG US – GENERAL SEAL (Part No.SS2376)

GENERAL SEAL

from

$14.29
GENERAL SEAL

Ishino – Timing Cover Grommet (Part No.A5070117634ISH)

Timing Cover Grommet

from

$3.02
Timing Cover Grommet

Top-Rated Engine Parts Brands For Your 2000 Subaru Legacy

Shop for the best-rated brands offering Engine Parts and other products for your 2000 Subaru Legacies. Below you’ll find some of our best rated Engine Parts from FELPRO, Dayco, and Carquest Premium, and more. Engine Parts from these brands that fit a 2000 Legacy start at just $5.49 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2000 Subaru Legacy Engine Parts

When it comes to maintaining or upgrading your 2000 Subaru Legacy, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2000 Subaru Legacy. With over 12 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.49, with an average price of just $50.60. Plus, with over 122 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

CIRCULAR PLUG
from
$7.79
This product is not rated

CIRCULAR PLUG

“”

Gasket Kit
from
$138.99
This product is not rated

Gasket Kit

“”

Engine Valve Stem Oil Seal Set
from
$27.49
This product is not rated

Engine Valve Stem Oil Seal Set

“”

Popular Dayco 2000 Subaru Legacy Engine Parts

Dayco auto parts is one of the highest quality Engine Part brands in the market. Any 2000 Subaru Legacy owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2000 Legacy, Advance Auto Parts carries a full inventory of 6 Dayco Engine Parts. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Dayco Engine Parts range from $71.99 to $364.99, plus, with more than 18 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Timing Belt Kit With Water Pump
from
$286.99
This product is not rated

Timing Belt Kit With Water Pump

“”

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers
from
$341.99

(5)

Timing Water Pump Kit; With Pump, Belt, Actuator, Tensioner And 3 Idlers

“I would definitely get this kit instead of just the belt. It’s probably worth it in the long run by not having to get back in there to replace the oth”

FAQs for 2000 Subaru Legacy Engine Parts

Which Engine Parts are best-sellers for 2000 Subaru Legacies?

Out of 97 Engine Parts that fit 2000 Subaru Legacies, the following parts are the top sellers:

What’s the price range for 2000 Subaru Legacy Engine Parts?

Engine Part prices for the 2000 Subaru Legacy start at $2.01 and go up to $3,894.99 for the most premium parts.

What’s the average price of a Engine Part for a 2000 Subaru Legacy?

The average price for Engine Parts for the 2000 Subaru Legacy is $121.78. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Subaru Legacy model years?

Yes, we currently carry Engine Parts for 34 model years of Subaru Legacies between 1990 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2000 Subaru Legacy?

The cheapest 2000 Subaru Legacy Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2000 Subaru Legacy?

Out of 1,516 reviews by customers, our 2000 Subaru Legacy Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2000 Subaru Legacy and their top-rated products:

What types of Engine Parts do you sell for my 2000 Subaru Legacy?

Can I get help with 2000 Subaru Legacy Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Engine Parts and more.

What is your return policy for Subaru Legacy Engine Parts?

Advance Auto Parts keeps returns simple. For new Subaru Legacy Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.