2000 Oldsmobile Bravada Transmission Parts

Below you will find various in-demand Oldsmobile Transmission Parts, components and accessories for your 2000 Bravada. Advance Auto Parts has popular Bravada parts like Automatic Transmission Parts, Transmission Bearings, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Bravada model years including 1994, 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004 and more. Select a category of 2000 Oldsmobile Bravada Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 Oldsmobile Bravada Transmission Parts Categories

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Automatic Trans Shifter Cable Levers

Manual Transmission Differential Bearings

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Shift Interlock Solenoids

Transmission Oil Cooler Fittings

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Pinion Seals

Neutral Safety Switch Connectors

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Torque Converter Seals

Extension Housing Seals

Automatic and Manual Transmission Shift Boots

Shaft Seals

Miscellaneous Automatic Transmission Seals

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Neutral Safety Relays

Remanufactured Automatic Transmissions

Torque Converter Bearings

Automatic Transmission Torque Conv. Clutch Solenoid Connector

Manual Transmission Bearing

Back Up Light Switch Clips

Automatic Transmission Oil Pump Seal Kit

Essential Transmission Parts for 2000 Oldsmobile Bravadas

from

$82.99

Vehicle Speed Sensor

from

$216.99

ATHARNESS VSS REPR

from

$11.79

AT OIL PUMP GASKET

from

$16.99

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This 2-piece assortment of Dorman OE FIX bushings saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$35.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$59.99

On certain GM vehicles, when an original equipment transmission pan is Leaking in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the performance of the original equipment pan but features a convenient drain plug to allow the transmission fluid to be removed before service. This steel pan is also upgraded with an E-coat finish for excellent resistance to corrosion, and includes a filter assembly, gasket and integrated magnet for a complete repair solution.

Product Features:

Service-friendly – this transmission fluid pan for specified vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
Durable design – constructed to strict specifications and protected with an E-coat finish, this upgraded pan is engineered to withstand corrosion, impacts and leaks for long and reliable service life
Complete solution – includes pan with integrated magnet, filter assembly and gasket for a hassle-free, professional repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$2282.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$14.99

AT OIL PAN GASKET

from

$32.99

This transmission shift boot matches the fit and function of the original equipment boot that as become damaged or missing. Made of quality materials, this boot is designed for durability and has been validated for a proper fit.

Product Features:

Ideal replacement – this transmission shift boot matches the fit and function of the original equipment boot for specific makes and models
Durable materials – this shift boot is manufactured from quality materials for durability
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$8.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$23.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
0.725″ Underhead Length
200,000 PSI

from

$17.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg F to 225 Deg F / -40 Deg C to 107 Deg C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$32.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$15.99

Driveworks wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, Driveworks bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.59

AT SEL SHAFT SEAL

from

$29.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$35.99

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$1299.99

Hays Race Convtr 4L60/65E 24-2800 Stall

from

$12.49

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$499.99

The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:

Universal Floor Mount Application
Base Trimmed For Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$18.99

Product Features:

Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Upgrade your 2000 Oldsmobile Bravada with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2000 Oldsmobile Bravada, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Transmission Parts are key to keeping your Bravada functioning at its best. At Advance Auto Parts, we offer a wide selection of 121 Transmission Parts for the 2000 Oldsmobile Bravada, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Bearings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2000 Oldsmobile Bravada at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $4,715.99, with an average price of $267.85. Our 121 Transmission Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2000 Oldsmobile Bravada without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Oldsmobile Bravada, we stock popular OEM and aftermarket Transmission Parts from top names like National, Dorman, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $7.99, and at an average 4.2 stars rating. With 425 customer reviews and counting, our 2000 Oldsmobile Bravada Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Oldsmobile Bravada is always ready to roll. We’re committed to providing you with everything you need to keep your Bravada in top shape, all in one place. Start shopping confidently below for your 2000 Oldsmobile Bravada!

Best-Selling Automatic Transmission Parts for 2000 Oldsmobile Bravadas

Enhance the driving experience in your Oldsmobile with 20 quality Automatic Transmission Part components, starting at $12.79.

show more show less

from

$31.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
100% copper winding for positive valve actuation on command.
Resistance and inductance matched to OE for proper fit, form and function
Precision ground pintle allows pintle to move freely in order to block or vent fluid pressure

from

$16.49

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$56.99

Shift Solenoid

from

$32.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$36.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$18.49

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing is vehicle-specific and precision-engineered for specified Chevrolet, GMC, Isuzu, and Oldsmobile models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$32.49

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$142.99

ATHARNESS VSS REPR

from

$36.49

AUTO TRANS BAND

from

$12.79

AT FRT PUMP BUSHING

from

$65.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$127.99

ATHARNESS VSS REPR

from

$51.99

AT/HARNESS VSS REPR

from

$2411.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2188.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1995.99

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1719.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$50.99

AT CONTR SOLENOID

from

$41.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

Most Popular 2000 Oldsmobile Bravada Transmission Bearings

Customize your Oldsmobile with 11 Transmission Bearings products like Countershaft Bearings, Automatic Transmission Differential Bearings, and Automatic Transmission Output Shaft Bearings, all priced under $43.99.

show more show less

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.99

Depending on the application, specified Driveworks wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$21.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$32.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Product Features:

Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$43.99

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$35.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$24.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.99

Product Features:

PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Top Picks for 2000 Oldsmobile Bravada Transmission Mounts

Upgrade Oldsmobile Bravadas with top-quality Transmission Mounts parts, including 1 OEM and aftermarket selections for your 2000 model.

show more show less

from

$27.99

Anchor 2839 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2010
Weight approx: 4 Lbs
Without Interlock

In-Demand Transmission Cooler and Parts for 2000 Oldsmobile Bravadas

Select from 13 premium Transmission Cooler and Parts parts for your 2000 Oldsmobile Bravada, with prices ranging from $11.99 to $85.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$26.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$23.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Most Sold 2000 Oldsmobile Bravada Transmission Seals

Explore our best-selling Oldsmobile parts for the 2000 Bravada among 13 OEM and aftermarket options starting from $3.99.

show more show less

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.59

AT SEL SHAFT SEAL

from

$21.29

AT OIL PUMP SEAL

from

$17.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$4.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$9.99

Product Features:

Brand may vary by location

from

$18.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$3.99

Shift Shaft O-Ring

Top-Rated Transmission Parts Brands For Your 2000 Oldsmobile Bravada

Shop for the best-rated brands offering Transmission Parts and other products for your 2000 Oldsmobile Bravadas. Below you’ll find some of our best rated Transmission Parts from National, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2000 Bravada start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2000 Oldsmobile Bravada Transmission Parts

When it comes to maintaining or upgrading your 2000 Oldsmobile Bravada, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2000 Oldsmobile Bravada. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $12.99. Plus, with over 22 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

from $6.99

(5)

Multi-Purpose Seal

“Awesome”

from $18.99

(4)

Multi-Purpose Seal

“great item”

Popular Dorman 2000 Oldsmobile Bravada Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2000 Oldsmobile Bravada owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2000 Bravada, Advance Auto Parts carries a full inventory of 3 Dorman Transmission Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Dorman Transmission Parts range from $7.99 to $45.99, plus, with more than 20 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $7.99

(16)

Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread

“Great product with great value”

from $16.49

(1)

Shift Lever Arm

“Dorman does a great job with OE replacement parts. Exact fit replacement part for my 2004 Chevy S10.”

from $45.99

(3)

Transmission Shift Interlock Solenoid

“Great product, good fit.”

FAQs for 2000 Oldsmobile Bravada Transmission Parts

Which Transmission Parts are best-sellers for 2000 Oldsmobile Bravadas?

Out of 121 Transmission Parts that fit 2000 Oldsmobile Bravadas, the following parts are the top sellers:

Taper Bearing Set (5050626) – $11.49
Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread (9110043) – $7.99
Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99

What’s the price range for 2000 Oldsmobile Bravada Transmission Parts?

Transmission Part prices for the 2000 Oldsmobile Bravada start at $1.99 and go up to $4,715.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2000 Oldsmobile Bravada?

The average price for Transmission Parts for the 2000 Oldsmobile Bravada is $267.85. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Oldsmobile Bravada model years?

Yes, we currently carry Transmission Parts for 11 model years of Oldsmobile Bravadas between 1991 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 2003, 2002, 2001, 1999, 1998, 1997, 1996, and 1994.

What are the cheapest Transmission Parts for my 2000 Oldsmobile Bravada?

The cheapest 2000 Oldsmobile Bravada Transmission Parts we carry in stock are:

Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
Oil Seal (5440149) – $3.99
Shift Shaft O-Ring (12009712) – $3.99
Oil Seal (15440117) – $4.99
Pinion Seal (10751052) – $4.99

What are the top-rated Transmission Parts that fit the 2000 Oldsmobile Bravada?

Out of 425 reviews by customers, our 2000 Oldsmobile Bravada Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2000 Oldsmobile Bravada and their top-rated products:

Back Up Neutral Safety Parts
- A/C Auto Temperature Control Relay (11271306) – $18.99
Transmission Connectors
- A/C Auto Temperature Control Relay (11271306) – $18.99
Automatic Transmission Pan and Gaskets
- A/C Auto Temperature Control Relay (11271306) – $18.99

What types of Transmission Parts do you sell for my 2000 Oldsmobile Bravada?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2000 Oldsmobile Bravada:

Can I get help with 2000 Oldsmobile Bravada Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Transmission Parts and more.

What is your return policy for Oldsmobile Bravada Transmission Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Bravada Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Oldsmobile Bravada Transmission Parts

ATP – Vehicle Speed Sensor (Part No.CE-11)

ATP – ATHARNESS VSS REPR (Part No.CE-9)

ATP – AT OIL PUMP GASKET (Part No.SG-40)

Dorman – Help – Shifter Cable Bushing Kit (OE Fix) (Part No.14055)

Schaeffler – Tapered Roller Bearing (Part No.KT63)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 12 Quart (Part No.265-811)

Spartan – Automatic Transmission Assembly; GM RWD 4L60E 4-Speed (Part No.7204-JC)

ATP – AT OIL PAN GASKET (Part No.SG-30)

Dorman – Help – Shift Lever Boot (Part No.47106CD)

Dorman – Transmission Line Connector with 3/8 Tube X 1/4-18 In. Thread (Part No.800-604)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

ARP Auto Racing – For Use With 90 Degree V6 Chevy/ 305, 502 V8 With 1 Piece Rear Seal (Part No.200-2906)

National – Multi Purpose Seal (Part No.710506)

National – Multi-Purpose Bearing (Part No.207)

Schaeffler – Shaft Seal (Part No.SS2803)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

National – Bearing Race (Part No.M88010)

Driveworks – Oil Seal (Part No.S-4950)

Dorman – Help – Shift Lever Arm (Part No.74124)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Carquest Premium – ABS Wheel Speed Sensor (Part No.SBC3665)

Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8695)

Hays – Hays Race Convtr 4L60/65E 24-2800 Stall (Part No.97-1H24F)

National – Multi Purpose Seal (Part No.223255)

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Carquest – A/C Auto Temperature Control Relay (Part No.R3107)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.8610)

Carquest – Automatic Transmission Control Solenoid (Part No.S9871)

Dorman – Help – Shift Lever Arm (Part No.74124)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-976)

ATP – Shift Solenoid (Part No.CE-14)

Pro-King – Automatic Transmission Solenoid (Part No.52-0214)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

Dorman – Help – Shifter Cable Bushing Kit (OE Fix) (Part No.14073)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4928)

ATP – ATHARNESS VSS REPR (Part No.CE-8)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

ATP – ATHARNESS VSS REPR (Part No.JE-24)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260151)

Spartan – Automatic Transmission Assembly; GM 4WD 4L60E 4-Spd (Part No.1268B-CN)

Premium Drive Train – Premium Remanufactured Automatic Transmission (Part No.T4L60E4398B4)

Moveras – M00023BB Remanufactured 4L60E Automatic Transmission Assembly (Part No.M00023BB)

ATP – AT CONTR SOLENOID (Part No.CE-15)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1171)

National – Bearing Race (Part No.M88010)

Driveworks – Taper Bearing Set (Part No.S-A-18)

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)

National – Tapered Roller Bearing Cone (Part No.LM501349)

National – Multi-Purpose Bearing (Part No.207)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67147)

Schaeffler – Tapered Roller Bearing (Part No.KT63)

Schaeffler – Cone (Part No.KM86649)

National – Bearing Race (Part No.JL69310)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2839)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-101)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-100)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

National – Multi-Purpose Seal (Part No.4934)

National – Multi-Purpose Seal (Part No.4583)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

National – Multi-Purpose Seal (Part No.710532)

National – Multi Purpose Seal (Part No.8792S)