1999 Oldsmobile Bravada Transmission Parts

Name: Multi Purpose Seal
Brand: National
SKU: 8792S
Price: 6.99 USD
Rating: 4.5 (20 reviews)

Below you will find various in-demand Oldsmobile Transmission Parts, components and accessories for your 1999 Bravada. Advance Auto Parts has popular Bravada parts like Transmission Mounts, Transmission Bearings, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other Bravada model years including 1994, 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2004 and more. Select a category of 1999 Oldsmobile Bravada Transmission Parts below and start saving instantly.

Popular 1999 Oldsmobile Bravada Transmission Parts Categories

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Automatic Trans Shifter Cable Levers

Transfer Shaft Bearing

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Automatic Transmission Shift Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Bushings

Automatic Transmission Output Shaft Seals

Automatic Transmission Line Assemblies

Automatic Transmission Oil Pump Seals

Pinion Seals

Neutral Safety Switch Connectors

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Back Up Light Switch Connectors

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic and Manual Transmission Shift Boots

Transmission Shift Kits

Back Up Lamp Connectors

Transmission Bands

Park Position Switches

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Vehicle Power Control Module Connector

Automatic Transmission Shifter Cable Brackets

Remanufactured Automatic Transmissions

Torque Converter Bearings

Automatic Transmission Torque Conv. Clutch Solenoid Connector

Parking, Neutral, and Back Up Lamp Switch Connectors

Transmission Control Module Connectors

Essential Transmission Parts for 1999 Oldsmobile Bravadas

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$48.99

AT/HARNESS VSS REPR

from

$37.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$472.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$8.99

AT SEL SHAFT SEAL

from

$17.49

Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.

Product Features:

Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
Corrosion resistant – specially coated to avoid rust for a long service life

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$59.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$33.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$19.99

AT OIL PUMP SEAL

from

$47.99

Bracket and Lever Kit for TH-350, 400, 200, 700-R4, 4L60E and 200-4R transmissions.

Product Features:

Incl. Cable Bracket/Shift Lever/Spacers
Incl. Swivel/Cotter Pin
Natural Finish
Sold as a kit
Replacement part

from

$109.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$33.99

AUTO TRANS BAND

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

from

$33.99

Cable Bracket, GM APPLICATION: For TH400, 350, 250, 200, 700R4, 2004R transmissions.

Product Features:

Shifter Service Parts

from

$10.99

AT OIL PUMP GASKET

from

$7.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$34.99

Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.

Product Features:

High density cork-nitrile rubber blend
Excellent compressibility and high recovery to create a positive seal
Excellent Compressibility

from

$189.99

AT SHIFT KIT

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$16.49

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$35.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 6

from

$12.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$1719.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$65.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Upgrade your 1999 Oldsmobile Bravada with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1999 Oldsmobile Bravada, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Transmission Parts are key to keeping your Bravada functioning at its best. At Advance Auto Parts, we offer a wide selection of 115 Transmission Parts for the 1999 Oldsmobile Bravada, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Transmission Bearings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1999 Oldsmobile Bravada at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $4,599.99, with an average price of $280.53. Our 115 Transmission Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1999 Oldsmobile Bravada without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Oldsmobile Bravada, we stock popular OEM and aftermarket Transmission Parts from top names like National, Imperial, B & M, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. Imperial and B & M also bring quality to the table, with Transmission Parts available starting at $47.99, and at an average 4.1 stars rating. With 423 customer reviews and counting, our 1999 Oldsmobile Bravada Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Oldsmobile Bravada is always ready to roll. We’re committed to providing you with everything you need to keep your Bravada in top shape, all in one place. Start shopping confidently below for your 1999 Oldsmobile Bravada!

Best-Selling Transmission Mounts for 1999 Oldsmobile Bravadas

Enhance the driving experience in your Oldsmobile with 1 quality Transmission Mount components, starting at $27.99.

show more show less

from

$27.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHEV 94-10; GMC 94-10; ISUZU 98-00; OLDS 96-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2010
Weight approx: 4 Lbs
WITHOUT INTERLOCK

Top Picks for 1999 Oldsmobile Bravada Transmission Seals

Upgrade Oldsmobile Bravadas with top-quality Transmission Seals parts, including 10 OEM and aftermarket selections for your 1999 model.

show more show less

from

$16.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$23.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$19.99

AT OIL PUMP SEAL

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$3.99

Shift Shaft O-Ring

In-Demand Automatic Transmission Parts for 1999 Oldsmobile Bravadas

Select from 24 premium Automatic Transmission Parts parts for your 1999 Oldsmobile Bravada, with prices ranging from $11.99 to $2,411.99.

show more show less

from

$31.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
100% copper winding for positive valve actuation on command.
Resistance and inductance matched to OE for proper fit, form and function
Precision ground pintle allows pintle to move freely in order to block or vent fluid pressure

from

$16.49

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

Shift Solenoid

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Splice Connectors

from

$18.49

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing is vehicle-specific and precision-engineered for specified Chevrolet, GMC, Isuzu, and Oldsmobile models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$23.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$30.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$133.99

ATHARNESS VSS REPR

from

$33.99

AUTO TRANS BAND

from

$11.99

AT FRT PUMP BUSHING

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$37.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$119.99

ATHARNESS VSS REPR

from

$48.99

AT/HARNESS VSS REPR

from

$2411.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2188.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1995.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1719.99

Product might not be available in all states due to local laws.

from

$93.99

AT CONTR SOLENOID

from

$47.99

AT CONTR SOLENOID

from

$41.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$33.99

B&M transmission bracket for General Motors 4L60E, 4L65E, 4L80E and 4L85E automatic transmissions with a PRNDL style switch.

Product Features:

Shifter Service Parts

Most Sold 1999 Oldsmobile Bravada Transmission Cooler and Parts

Explore our best-selling Oldsmobile parts for the 1999 Bravada among 11 OEM and aftermarket options starting from $25.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$26.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Top-Rated Transmission Parts Brands For Your 1999 Oldsmobile Bravada

Shop for the best-rated brands offering Transmission Parts and other products for your 1999 Oldsmobile Bravadas. Below you’ll find some of our best rated Transmission Parts from National, Imperial, and B & M, and more. Transmission Parts from these brands that fit a 1999 Bravada start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1999 Oldsmobile Bravada Transmission Parts

When it comes to maintaining or upgrading your 1999 Oldsmobile Bravada, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1999 Oldsmobile Bravada. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $12.32. Plus, with over 22 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.99

(4)

Multi-Purpose Seal

“great item”

from $6.99

(5)

Multi-Purpose Seal

“This part was exactly the same as the part on my 2004 Trailblazer 4.2L, even had the same number stamped on it.”

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

Popular Imperial 1999 Oldsmobile Bravada Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1999 Oldsmobile Bravada owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1999 Bravada, Advance Auto Parts carries a full inventory of 3 Imperial Transmission Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Imperial Transmission Parts range from $61.99 to $85.99, plus, with more than 14 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from $61.99

(3)

Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11"

“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”

from $73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

FAQs for 1999 Oldsmobile Bravada Transmission Parts

Which Transmission Parts are best-sellers for 1999 Oldsmobile Bravadas?

Out of 115 Transmission Parts that fit 1999 Oldsmobile Bravadas, the following parts are the top sellers:

Taper Bearing Set (5050626) – $12.99
Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread (9110043) – $7.99
Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99

What’s the price range for 1999 Oldsmobile Bravada Transmission Parts?

Transmission Part prices for the 1999 Oldsmobile Bravada start at $3.99 and go up to $4,599.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1999 Oldsmobile Bravada?

The average price for Transmission Parts for the 1999 Oldsmobile Bravada is $280.53. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Oldsmobile Bravada model years?

Yes, we currently carry Transmission Parts for 11 model years of Oldsmobile Bravadas between 1991 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 2003, 2002, 2001, 2000, 1998, 1997, 1996, and 1994.

What are the cheapest Transmission Parts for my 1999 Oldsmobile Bravada?

The cheapest 1999 Oldsmobile Bravada Transmission Parts we carry in stock are:

Oil Seal (5440149) – $3.99
Shift Shaft O-Ring (12009712) – $3.99
Oil Seal (15440117) – $4.99
Oil Seal (5440025) – $5.99
Multi-Purpose Seal (18444499) – $6.99

What are the top-rated Transmission Parts that fit the 1999 Oldsmobile Bravada?

Out of 423 reviews by customers, our 1999 Oldsmobile Bravada Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1999 Oldsmobile Bravada and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan: Direct Fit, Steel, 12 Quart (15680134) – $59.99
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49
Transmission Cooler and Parts
- Transmission Oil Pan: Direct Fit, Steel, 12 Quart (15680134) – $59.99
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99
- EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (11953660) – $17.49

What types of Transmission Parts do you sell for my 1999 Oldsmobile Bravada?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1999 Oldsmobile Bravada:

Can I get help with 1999 Oldsmobile Bravada Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Transmission Parts and more.

What is your return policy for Oldsmobile Bravada Transmission Parts?

Advance Auto Parts keeps returns simple. For new Oldsmobile Bravada Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Oldsmobile Bravada Transmission Parts

National – Multi Purpose Seal (Part No.8792S)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

GM Genuine Parts – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

B & M – Tork Master 2400 (Part No.70418)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Dorman – EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (Part No.092-018)

National – Multi-Purpose Seal (Part No.4583)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 12 Quart (Part No.265-811)

B & M – Cable Bracket (Part No.30498)

Driveworks – Oil Seal (Part No.S-8610)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

B & M – Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4 (Part No.35498)

Carquest Premium – Repair Harness (Part No.PTC1522)

ATP – AUTO TRANS BAND (Part No.CX-42)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

B & M – Cable Bracket (Part No.30499)

ATP – AT OIL PUMP GASKET (Part No.SG-40)

FAG US – Shaft Seal (Part No.SS2114)

Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8695)

ATP – AT SHIFT KIT (Part No.SK-2)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Dorman – Help – Shift Lever Arm (Part No.74124)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)

Driveworks – Taper Bearing Set (Part No.S-A-18)

Moveras – 4L60E – Automatic Transmission (Part No.M00335)

Driveworks – Taper Bearing Set (Part No.S-A-36)

GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT1626)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2839)

Driveworks – Taper Bearing Set (Part No.S-A-18)

National – Multi-Purpose Bearing (Part No.A-18)

National – Bearing (Part No.M86649)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

National – Multi-Purpose Seal (Part No.4934)

National – Multi-Purpose Seal (Part No.4583)

National – Multi-Purpose Seal (Part No.710687)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.8610)

Driveworks – Oil Seal (Part No.S-8610)

FAG US – Shaft Seal (Part No.SS2114)

USA Standard Gear – Shift Shaft O-Ring (Part No.76151)

Carquest – Automatic Transmission Control Solenoid (Part No.S9871)

Dorman – Help – Shift Lever Arm (Part No.74124)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-976)

ATP – Shift Solenoid (Part No.CE-14)

Pro-King – Automatic Transmission Solenoid (Part No.52-0214)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

Dorman – Help – Shifter Cable Bushing Kit (OE Fix) (Part No.14073)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-100)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4928)

ATP – ATHARNESS VSS REPR (Part No.CE-8)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

GM Genuine Parts – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

ATP – ATHARNESS VSS REPR (Part No.JE-24)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260151)

Spartan – Automatic Transmission Assembly; GM 4WD 4L60E 4-Spd (Part No.1268B-CN)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L60E4398B4)

Moveras – 4L60E – Automatic Transmission (Part No.M00023BB)

ATP – AT CONTR SOLENOID (Part No.JE-14)

ATP – AT CONTR SOLENOID (Part No.CE-15)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1171)

B & M – Bracket Kit for 4L60E/4L80E (Part No.70499)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-101)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)