2000 Mercedes-Benz SL600 Cooling and Climate Controls

Essential 2000 Mercedes-Benz SL600 Cooling and Climate Controls

Motorad – Integrated Thermostat Housing: With Seal, 189 Degrees (Part No.918-189)

Integrated Thermostat Housing: With Seal, 189 Degrees

from

$107.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75898)

Blower Motor: With Wheel

from

$152.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Cap-Expansion Tank

from

$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39210)

A/C Block Type Flange Expansion Valve

from

$29.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5092)

Engine Water Pump: New, Gasket/Seals Included

from

$233.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Hella – Coolant Level Sensor (Part No.G1050101126HEL)

Coolant Level Sensor

from

$26.44
Coolant Level Sensor

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26769)

O-Ring & Gasket A/C System Seal Kit

from

$31.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1074)

AC Pressure Sensor

from

$135.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)

X-Treme S-Blade Electric Fan

from

$519.99
X-Treme S-Blade Electric Fan

ACM – ACM A/C Receiver Drier (Part No.R1040148407ACM)

ACM A/C Receiver Drier

from

$173.86
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Behr – A/C Pressure Switch (Part No.R1054178181BEH)

A/C Pressure Switch

from

$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)

Air Conditioning Evaporator Temperature Sensor

from

$54.53
ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.
See More

ACM – A/C Pressure Switch (Part No.R1054768236ACM)

A/C Pressure Switch

from

$62.55
A/C Pressure Switch

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Radiator Drain Plug

from

$6.23
Radiator Drain Plug

Factory Air – Ceramic Shaft Seal Kit (Part No.24016)

Ceramic Shaft Seal Kit

from

$21.29
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Green Round O-Ring (Part No.24615)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Carquest Premium – A/C Tube and Fin Evaporator (Part No.T54128)

A/C Tube and Fin Evaporator

from

$199.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Behr – A/C Evaporator (Part No.R113066129BEH)

A/C Evaporator

from

$504.01
A/C Evaporator

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

2000 Mercedes-Benz SL600 Cooling and Climate Controls

You count on your 2000 Mercedes-Benz SL600 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 34 Cooling and Climate Controls ranging in price from $0.99 to $519.99, you’re sure to find everything you need for your 2000 Mercedes-Benz SL600.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 13 different brands like Permatex, Carquest Premium, and Factory Air. 2000 Mercedes-Benz SL600 Cooling and Climate Controls start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 397 extensive product reviews on 2000 Mercedes-Benz SL600 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are A/C Pressure Switch with 1.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2000 Mercedes-Benz SL600 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2000 Mercedes-Benz SL600

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Mercedes-Benz SL600 running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.

Popular Carquest Premium Cooling and Climate Controls

You’ll find popular Carquest Premium brand products across Air Conditioning Parts and Engine Cooling Parts. All are waiting to get your 2000 Mercedes-Benz SL600 back on the road. Some of the top-rated Carquest Premium products in these categories are:
A/C Block Type Flange Expansion Valve
from $29.99
(1)
A/C Block Type Flange Expansion Valve
Expansion Valve and Orifice Tubes
Engine Coolant Reservoir Cap
from $19.79
(1)
Engine Coolant Reservoir Cap
Coolant Reservoir Caps

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2000 Mercedes-Benz SL600, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2000 Mercedes-Benz SL600 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2000 Mercedes-Benz SL600?

Out of 34 Cooling and Climate Controls for the 2000 Mercedes-Benz SL600, the most popular in our inventory are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Green Round O-Ring
from $1.99
This product is not rated
Green Round O-Ring
AC Compressor Seals
Green Round O-Ring
from $0.99
This product is not rated
Green Round O-Ring
AC Line O-Rings

What are the top-rated 2000 Mercedes-Benz SL600 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2000 Mercedes-Benz SL600 based on customer reviews/ratings are:
A/C Pressure Switch
from $62.55
(1)
A/C Pressure Switch
“This pressure switch was faulty. Since I travel all the time I was on the road doing the install. The install was unsuccessful and I could not get bac”