2000 Lexus LS400 Steering and Chassis Parts

Below you will find various in-demand Lexus Steering and Chassis Parts, components and accessories for your 2000 LS400. Advance Auto Parts has popular LS400 parts like Strut Rods, Sway Bars, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other LS400 model years including 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and more. Select a category of 2000 Lexus LS400 Steering and Chassis Parts below and start saving instantly.

Popular 2000 Lexus LS400 Steering and Chassis Parts Categories

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Control Valves

Power Steering Pressure Hoses

Sway Bar Link Bushing Kits

Rack and Pinion Boots

Sway Bar Bushings

Power Steering Pump Seal Kits

Rack and Pinion Seal Kits

Strut Rod Kits

Essential Steering and Chassis Parts for 2000 Lexus LS400s

from

$23.38

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$97.16

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

from

$72.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$28.99

POWER STEERINGFILTER

from

$32.49

Reduce body roll. Eliminate creaks and groans in suspension. Restore ride quality and feel.

from

$97.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$98.18

P/S Air Control Valv

from

$147.86

P/S Air Control Valv

from

$36.49

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$62.22

Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$256.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$257.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$84.65

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$74.99

This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$40.48

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$41.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$28.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$221.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$340.55

AAE remanufactured Power Steering Pumps not only offer a high quality, low cost alternative to new parts, but are the leading choice in the remanufactured market.

Product Features:

OEM-Quality and Direct Fit replacement.
Original Equipment Supplier
100% new, premium-grade seals
Surface wear on cam packs are microfinished
Seal surface on input shafts are microfinished for leak-free sealing
Pumps are thoroughly tested

from

$18.99

Tie Rod End

from

$18.99

Driveworks chassis parts help to reduce internal friction and wear by a Premium low friction design which included a hardened and polished ball stud and a high strength polymer bearing.

Product Features:

Forged housing provides unequaled strength and durability.
Form a oxidation film on the surface of metal to protect the surface of metal from corrosion
Phosphated ball stud provides a smooth, durable and wear-resisting surface to extend service life
Premium Polychloroprene Rubber Boots fitted with grease relief valves to keep out dirt

from

$46.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$61.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$106.99

from

$181.99

from

$91.99

Upgrade your 2000 Lexus LS400 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Lexus LS400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Steering and Chassis Parts are key to keeping your LS400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Steering and Chassis Parts for the 2000 Lexus LS400, designed to meet your needs without breaking the bank. From Strut Rod replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Lexus LS400 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $6.99 to $340.55, with an average price of $96.52. Our 49 Steering and Chassis Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2000 Lexus LS400 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Lexus LS400, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 69 customer reviews and counting, our 2000 Lexus LS400 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Lexus LS400 is always ready to roll. We’re committed to providing you with everything you need to keep your LS400 in top shape, all in one place. Start shopping confidently below for your 2000 Lexus LS400!

Best-Selling Strut Rods for 2000 Lexus LS400s

Enhance the driving experience in your Lexus with 1 quality Strut Rod components, starting at $97.16.

show more show less

from

$97.16

Unique polyurethane alternative
Sleeves in the bushings freely rotate which enhances longevity
Impregnated with graphite to aid in lubrication and reduce noise
Alternative to conventional rubber suspension bushings

Top Picks for 2000 Lexus LS400 Power Steering Parts

Upgrade Lexus LS400s with top-quality Power Steering Parts parts, including 25 OEM and aftermarket selections for your 2000 model.

show more show less

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$41.49

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$211.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$147.86

P/S Air Control Valv

from

$46.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$31.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$340.55

AAE remanufactured Power Steering Pumps not only offer a high quality, low cost alternative to new parts, but are the leading choice in the remanufactured market.

Product Features:

OEM-Quality and Direct Fit replacement.
Original Equipment Supplier
100% new, premium-grade seals
Surface wear on cam packs are microfinished
Seal surface on input shafts are microfinished for leak-free sealing
Pumps are thoroughly tested

from

$254.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$192.12

P/S Pump

from

$181.99

from

$98.18

P/S Air Control Valv

from

$97.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$59.99

Rein OE Quality power steering air vacuum control valves are manufactured to factory specifications using OE grade components. A P/S air control valve serves the important function of controlling the engine idle speed during low speed steering situations. A sign of a failing or failed power steering air control valve may include the loss of P/S fluid through an internal or an external leak around the valve and or engine speed instability during low speed steering. Trust the quality of Rein’s 100% tested OE fit, form and function automotive power steering air control valves.

Product Features:

Ensures the proper operation of vehicle’s power steering system
Designed to meet or exceed factory specifications
Manufactured with OE grade components
Uses vehicle specific end fittings for a quick replacement

from

$36.49

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$28.99

All Steering Power Filter

from

$28.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$25.99

RACK BELLOW

from

$19.95

Steering Rack Boot Kit

from

$6.99

POWER STEERINGFILTER

In-Demand Tie Rods for 2000 Lexus LS400s

Select from 9 premium Tie Rods parts for your 2000 Lexus LS400, with prices ranging from $18.99 to $214.38.

show more show less

from

$52.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$52.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$18.99

Forged housing provides unequaled strength and durability.
Form a oxidation film on the surface of metal to protect the surface of metal from corrosion
Phosphated ball stud provides a smooth, durable and wear-resisting surface to extend service life
Premium Polychloroprene Rubber Boots fitted with grease relief valves to keep out dirt

from

$51.29

CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.

Product Features:

Lower preload at assembly, less friction
No lubrication required in service
Less service wear
Longer service life

from

$39.31

Lower preload at assembly, less friction
No lubrication required in service
Less service wear
Longer service life

from

$77.15

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$214.38

TIE ROD END

from

$57.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$31.92

Tie Rod End

Most Sold 2000 Lexus LS400 Ball Joints

Explore our best-selling Lexus parts for the 2000 LS400 among 10 OEM and aftermarket options starting from $72.99.

show more show less

from

$72.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$72.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$87.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$278.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$278.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$257.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$256.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$195.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$174.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$87.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Top-Rated Steering and Chassis Parts Brands For Your 2000 Lexus LS400

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2000 Lexus LS400s. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone and Moog, and more. Steering and Chassis Parts from these brands that fit a 2000 LS400 start at just $28.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2000 Lexus LS400 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2000 Lexus LS400, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2000 Lexus LS400. With over 7 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $116.94. Plus, with over 64 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$192.12

This product is not rated

P/S Pump

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$254.99

This product is not rated

New Power Steering Pump

“”

Popular Moog 2000 Lexus LS400 Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2000 Lexus LS400 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2000 LS400, Advance Auto Parts carries a full inventory of 8 Moog Steering and Chassis Parts. Plus you will be keeping your Lexus in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $28.99 to $278.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$72.99

This product is not rated

Ball Joint

“”

from
$72.99

This product is not rated

Ball Joint

“”

from
$31.99

This product is not rated

Rack & Pinion Bellows Kit

“”

FAQs for 2000 Lexus LS400 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2000 Lexus LS400s?

Out of 49 Steering and Chassis Parts that fit 2000 Lexus LS400s, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Tie Rod End (26950509) – $18.99
Tie Rod End (20519835) – $52.99

What’s the price range for 2000 Lexus LS400 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2000 Lexus LS400 start at $6.99 and go up to $340.55 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2000 Lexus LS400?

The average price for Steering and Chassis Parts for the 2000 Lexus LS400 is $96.52. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Lexus LS400 model years?

Yes, we currently carry Steering and Chassis Parts for 10 model years of Lexus LS400s between 1990 and 1999. Steering and Chassis Parts are bought most frequently for the following model years: 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Steering and Chassis Parts for my 2000 Lexus LS400?

The cheapest 2000 Lexus LS400 Steering and Chassis Parts we carry in stock are:

POWER STEERINGFILTER (50167394) – $6.99
Tie Rod End (26950509) – $18.99
Steering Rack Boot Kit (10770606) – $19.95
RACK BELLOW (50229100) – $25.99
Power Steering Filter (50155374) – $28.99

What are the top-rated Steering and Chassis Parts that fit the 2000 Lexus LS400?

Out of 69 reviews by customers, our 2000 Lexus LS400 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2000 Lexus LS400 and their top-rated products:

Tie Rods
- Tie Rod End (20519836) – $52.99
- Tie Rod End (20519835) – $52.99

What types of Steering and Chassis Parts do you sell for my 2000 Lexus LS400?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2000 Lexus LS400:

Can I get help with 2000 Lexus LS400 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Steering and Chassis Parts and more.

What is your return policy for Lexus LS400 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Lexus LS400 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Lexus LS400 Steering and Chassis Parts

CTR – Sway Bar Link (Part No.L1030151600CTR)

AST – Polyurethane Strut Rod Bushing (Part No.L2072578808AST)

MOOG – Ball Joint (Part No.K500214)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Beck/Arnley – Stabilizer Bushing Set (Part No.101-6470)

Powercraft – Rack Pinion Seal Kit (Part No.8695)

Rein – P/S Air Control Valv (Part No.M2045136067RIN)

Dorman – P/S Air Control Valv (Part No.M2045136067DOR)

Beck/Arnley – Tie Rod End (Part No.101-4537)

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010117923SNK)

Dorman – Suspension Control Arm (Part No.521-069)

Dorman – Suspension Control Arm and Ball Joint Assembly (Part No.521-070)

Sankei 555 – Ball Joint (Part No.L2020131881SNK)

Dorman – Suspension Ball Joint (Part No.531-129)

Dorman – Stabilizer Bar Bushing Kit (Part No.532-371)

CTR – Sway Bar Link (Part No.L1030140477CTR)

Rare Parts – Rack & Pinion Bellows (Part No.RP26985)

MOOG – Rack & Pinion Bellows Kit (Part No.K8581)

Cardone – Remanufactured Power Steering Pump (Part No.21-5899)

Atlantic Automotive Eng. – Power Steering Pump, Remanufactured (Part No.M2010976802AAE)

Driveworks – Tie Rod End (Part No.DW-ES80584)

Driveworks – Tie Rod End (Part No.DW-ES80585)

Powercraft – Pump Seal Kit (Part No.8996)

Carquest Premium – Power Steering Pressure Tube Assembly, 16mm Banjo x 16mm Male Inv. Flare (Part No.36343)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Banjo (Part No.37427)

Carquest Premium – Pressure Hose Assembly, 16mm Banjo x 16mm Female Inv. Flare (Part No.37257)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Female Inv. Flare (Part No.37256)

AST – Polyurethane Strut Rod Bushing (Part No.L2072578808AST)

Beck/Arnley – Stabilizer End Link (Part No.101-5324)

CTR – Sway Bar Link (Part No.L1030140477CTR)

CTR – Sway Bar Link (Part No.L1030140476CTR)

Beck/Arnley – Stabilizer Bushing Set (Part No.101-6470)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Rare Parts – Rack & Pinion Bellows (Part No.RP26985)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Remanufactured Power Steering Pump (Part No.21-5143)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Dorman – P/S Air Control Valv (Part No.M2045136067DOR)

Powercraft – Pump Seal Kit (Part No.8996)

MOOG – Rack & Pinion Bellows Kit (Part No.K150285)

Atlantic Automotive Eng. – Power Steering Pump, Remanufactured (Part No.M2010976802AAE)

Cardone New – New Power Steering Pump (Part No.96-5143)

Cardone – P/S Pump (Part No.M2010900886CAR)

Carquest Premium – Pressure Hose Assembly, 16mm Banjo x 16mm Female Inv. Flare (Part No.37257)

Rein – P/S Air Control Valv (Part No.M2045136067RIN)

Powercraft – Rack Pinion Seal Kit (Part No.8695)

Rein – Power Steering Air Vacuum Control Valve (Part No.ELP0141)

Rare Parts – Rack & Pinion Bellows (Part No.RP27375)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

MOOG – Rack & Pinion Bellows Kit (Part No.K8581)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Dorman – RACK BELLOW (Part No.541-514)

EMPI – Steering Rack Boot Kit (Part No.M1030165841EMP)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

MOOG – Tie Rod End (Part No.ES80584)

MOOG – Tie Rod End (Part No.ES80585)

Driveworks – Tie Rod End (Part No.DW-ES80585)

CTR – CTR Tie Rod End (Part No.M3010295072CTR)

CTR – CTR Tie Rod End (Part No.M3010136685CTR)

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010146593SNK)

Worldpac – TIE ROD END (Part No.M3010295072DEL)

Beck/Arnley – Outer Tie Rod End (Part No.101-4405)

Autopart International Inc – Tie Rod End (Part No.M30101954573API)

MOOG – Ball Joint (Part No.K500213)

MOOG – Ball Joint (Part No.K500214)

Rare Parts – Ball Joint (Part No.RP12922)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620653)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620654)

Dorman – Suspension Control Arm and Ball Joint Assembly (Part No.521-070)

Dorman – Suspension Control Arm (Part No.521-069)

Rare Parts – Conrol Arm W/Bj (Part No.RP11873)

Rare Parts – Conrol Arm W/Bj (Part No.RP11874)

Rare Parts – Ball Joint (Part No.RP12923)