2000 Ford Taurus Parking Brake Cable

Your 2000 Ford Taurus might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Parking Brake Cable product you desperately need.

We currently carry 5 Parking Brake Cable products to choose from for your 2000 Ford Taurus, and our inventory prices range from as little as $17.99 up to $39.99.

On top of low prices, Advance Auto Parts offers 1 different trusted brands of Parking Brake Cable products for the 2000 Ford Taurus. We only sell parts from trusted brands like Carquest so that you can find quality parts you can count on.

Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 63 reviews on our Parking Brake Cable products for the 2000 Ford Taurus from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Parking Brake Cable stock in-person!

Show More Show Less

Parking Brake Cable for Your 2000 Ford Taurus

Search through our amazing selection of Parking Brake Cable products for your 2000 Ford Taurus to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

Carquest Wearever - Parking Brake Cable (Part No. BCA95177)
Description
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design - inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials - zinc-plated fittings prevent corrosion

3.5

Read 3 review(s)

Review snapshot ® by PowerReviews

3.5

3.5

4

4

2018-12-12

4

4

some assembly required

some assembly required

Submitted 2018-12-12

By kevin

From scranton, pa

used this on an 03 f350 with the 6.0 powerstroke, 10.5 sterling rear, single rear wheel. Fit well and not nearly as painful or dramatic as the other reviews here make it sound. my only issue is that the common attachment point for the intermediate cable is crooked. the right cable extends past the left cable about 1". made a spacer to make up the difference in length and all is well. much better than $120 @ the ford dealer

Bottom Line recommended

used this on an 03 f350 with the 6.0 powerstroke, 10.5 sterling rear, single rear wheel. Fit well and not nearly as painful or dramatic as the other reviews here make it sound. my only issue is that the common attachment point for the intermediate cable is crooked. the right cable extends past the left cable about 1". made a spacer to make up the difference in length and all is well. much better than $120 @ the ford dealer

By kevin from scranton, pa

BOTTOM LINE recommended

5

5

2018-10-09

5

5

I would purchase again

I would purchase again

Submitted 2018-10-09

By Robert

From Undisclosed

Good product easy install

Bottom Line NULL

Good product easy install

By Robert from Undisclosed

BOTTOM LINE NULL

1

1

2015-01-18

1

1

Buy it from the dealership

Buy it from the dealership

Submitted 2015-01-18

By Paul B.

From Oklahoma City, OK

I bought this as one of the pair of parking brake cables that needed to be replaced on my F350 Superduty. Neither cable fit the truck like it was supposed to. The end that fits on the parking brake fit in the hole. That's the easy part. Then pull the spring back and insert the clipped housing end in the bracket. Release the spring and viola!, the spring is too long. It actually keeps the cable pulled too far and tries to bend into a small arc. Both sides did it, so it isn't a fluke. I thought I could remedy this by hooking it all up and maybe then, the tension in the line would straighten it out. On I plodded and routed the lines and got them up to the frame bracket. Another clip end on the housing that is supposed to just drop into the hole. No dice here either. The rubber washer keeps the clip from going in far enough to engage. Once that was corrected and the lines were in place, I slipped the cables into the connection with the cabe to the parking brake pedal. Wait. Read that again. I slipped them in. Not enough tension on them. So now they are installed and the pedal goes to the floor without ever engaging the parking brake. Now I've either got to replace them with factory ones or find a way to adjust the slack out. These things are not worth the money you save.

Bottom Line not recommended

I bought this as one of the pair of parking brake cables that needed to be replaced on my F350 Superduty. Neither cable fit the truck like it was supposed to. The end that fits on the parking brake fit in the hole. That's the easy part. Then pull the spring back and insert the clipped housing end in the bracket. Release the spring and viola!, the spring is too long. It actually keeps the cable pulled too far and tries to bend into a small arc. Both sides did it, so it isn't a fluke. I thought I could remedy this by hooking it all up and maybe then, the tension in the line would straighten it out. On I plodded and routed the lines and got them up to the frame bracket. Another clip end on the housing that is supposed to just drop into the hole. No dice here either. The rubber washer keeps the clip from going in far enough to engage. Once that was corrected and the lines were in place, I slipped the cables into the connection with the cabe to the parking brake pedal. Wait. Read that again. I slipped them in. Not enough tension on them. So now they are installed and the pedal goes to the floor without ever engaging the parking brake. Now I've either got to replace them with factory ones or find a way to adjust the slack out. These things are not worth the money you save.

By Paul B. from Oklahoma City, OK

BOTTOM LINE not recommended
from $37.99
View Product
Carquest Wearever - Parking Brake Cable (Part No. BCA95184)
Description
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design - inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials - zinc-plated fittings prevent corrosion

3.0

Read 1 review(s)

Review snapshot ® by PowerReviews

3.0

3.0

3

3

2013-12-24

3

3

They should have sweat the small stuff

They should have sweat the small stuff

Submitted 2013-12-24

By Wiley Coyote

From Peoria, IL

This is a fine cable that seems well made and fits as designed, except for the smallest, simplest detail. Instead of the bent wire bracket shown in the photos (which would have been preferable), it came with a bent metal strip. This type of design typically has holes at each end, and is bent to go around the cable such that the holes line up and you stick a screw through both holes. That's all well and good--as long as the holes are the same size! This bracket had one hole the right size, and one that...wasn't. Easily remedied with a drill, but this obvious failure to get the simplest detail right makes you wonder about the rest of the cable.

Bottom Line recommended

This is a fine cable that seems well made and fits as designed, except for the smallest, simplest detail. Instead of the bent wire bracket shown in the photos (which would have been preferable), it came with a bent metal strip. This type of design typically has holes at each end, and is bent to go around the cable such that the holes line up and you stick a screw through both holes. That's all well and good--as long as the holes are the same size! This bracket had one hole the right size, and one that...wasn't. Easily remedied with a drill, but this obvious failure to get the simplest detail right makes you wonder about the rest of the cable.

By Wiley Coyote from Peoria, IL

BOTTOM LINE recommended
from $30.99
View Product
Carquest Wearever - Parking Brake Cable (Part No. BCA95199)
Description
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design - inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials - zinc-plated fittings prevent corrosion

3.0

Read 1 review(s)

Review snapshot ® by PowerReviews

3.0

3.0

3

3

2013-12-24

3

3

Hello, quality control?

Hello, quality control?

Submitted 2013-12-24

By Wiley Coyote

From Peoria, IL

This cable seems to be made well enough, except for one thing--the grommet that seals the hole in the floor is put on the cable backward. Considering it's in stock exactly nowhere in these parts, returning it wasn't a timely option. In a last-ditch effort I managed to get it off and reinstall it correctly. It was actually easier than I feared, so with a little care it can be done, which is good since it's likely yours will be on backward too. How do I know, you ask? Well, consider that it's also installed backward in the photos. And in several other similar photos around the web. As a result I can't really recommend this cable, but then I can't recommend going elsewhere either since you'll probably get the same cable. So get ready to swap that grommet around!

Bottom Line not recommended

This cable seems to be made well enough, except for one thing--the grommet that seals the hole in the floor is put on the cable backward. Considering it's in stock exactly nowhere in these parts, returning it wasn't a timely option. In a last-ditch effort I managed to get it off and reinstall it correctly. It was actually easier than I feared, so with a little care it can be done, which is good since it's likely yours will be on backward too. How do I know, you ask? Well, consider that it's also installed backward in the photos. And in several other similar photos around the web. As a result I can't really recommend this cable, but then I can't recommend going elsewhere either since you'll probably get the same cable. So get ready to swap that grommet around!

By Wiley Coyote from Peoria, IL

BOTTOM LINE not recommended
from $25.99
View Product
Carquest Wearever - Parking Brake Cable (Part No. BCA95534)
Description
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design - inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials - zinc-plated fittings prevent corrosion
from $39.99
View Product
Carquest Wearever - Parking Brake Cable (Part No. BCA95436)
Description
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
Quality design - inner cables are sheathed and lubricated to provide improved durability
Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables
Tough materials - zinc-plated fittings prevent corrosion
from $17.99
View Product