2000 Ford Mustang Drive Shafts and Axles

Essential 2000 Ford Mustang Drive Shafts and Axles

Lakewood – Drive Shaft Loop (Part No.18017)

Drive Shaft Loop

from

$61.99
Features Zinc plated construction for durability. Includes all hardware and instructions.

Product Features:
  • Easy Bolt-On Installation
  • Without Modifications
  • NHRA/IHRA Legal
  • Thick Zinc-Plated Steel
  • Compete W/Mounting Hardware
  • Includes Instructions
See More

SKF – Axle Seal (Part No.K4021285300SKF)

Axle Seal

from

$7.11
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More

Yukon Gear – Axle Stud , 58Mm X M14-2.0 (Part No.33557)

Axle Stud , 58Mm X M14-2.0

from

$5.99
AXLE STUD , 58MM X M14-2.0 .
See More

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.FC-66998)

Bearings

from

$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99112)

Shaft Repair Sleeve

from

$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Ford 7.5" C/Clip, Tracloc & Standard Open (Part No.33080)

Ford 7.5" C/Clip, Tracloc & Standard Open

from

$8.99
Ford 7.5″ C/clip, TracLoc & standard Open.

Product Features:
  • c-clip for Ford 7.5″
  • Fits standard open and Trac Loc applications
  • Not compatible with Auburn Gear positraction
See More

Yukon Gear – 7.5" C/Clip, Ag Positraction (Part No.33079)

7.5" C/Clip, Ag Positraction

from

$47.99
7.5″ C/clip, AG positraction

Product Features:
  • C-clip
  • Fits Ford 7.5″ with Auburn Gear positraction
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spartan – Drive Axle Assembly; Ford Mustang Axle W/ABS (Part No.RAX1961C)

Drive Axle Assembly; Ford Mustang Axle W/ABS

from

$1344.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-076)

Rear Drive Shaft: Greaseable, Adjustable

from

$741.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable (Part No.936-812)

Rear Drive Shaft: Greaseable

from

$672.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.986-522)

Rear Drive Shaft

from

$389.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft (Part No.936-618)

Rear Drive Shaft

from

$638.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support)

from

$63.99
1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:
  • Adapter sleeve
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More

Yukon Gear – Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od) (Part No.41045)

Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od)

from

$319.99
Yukon flange yoke for Ford 7.5″ passenger and truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 7.5″
  • 28 spline
  • Round companion flange
  • 4.3″ O.D.
See More

2000 Ford Mustang Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2000 Ford Mustang. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 26 different Drive Shafts and Axles in our inventory ranging from $1.99 to $1,344.99. That means you can find the exact parts or products you need to keep that 2000 Ford Mustang running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2000 Ford Mustang. DriveWorks, Spicer, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2000 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 187 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Bearings with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2000 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2000 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2000 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 2000 Ford Mustang, our most popular Dorman – Help Drive Shafts and Axles include:
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts

Top 2000 Ford Mustang Drive Shafts and Axles from Driveworks

Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 2000 Ford Mustang. Popular Driveworks parts include:
Oil Seal
from $5.49
(38)
Oil Seal
Axle Shaft Seals
Axle Repair Bearing
from $16.49
(19)
Axle Repair Bearing
Axle Shaft Bearings
Universal Joint
from $31.99
(1)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2000 Ford Mustang Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2000 Ford Mustang?

Out of 26 Drive Shafts and Axles for the 2000 Ford Mustang, the most popular in our inventory are:
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Bearings
from $15.99
(9)
Bearings
Drive Shaft Bearings
Universal Joint
from $44.99
(7)
Universal Joint
Axle Shaft Universal Joints

What are the top-rated 2000 Ford Mustang Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2000 Ford Mustang based on customer reviews/ratings are:
Bearings
from $10.49
(4)
Bearings
“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
Bearings
from $10.79
(2)
Bearings
“Perfect fit and worked appeared to match OEM quality.”
Multi Purpose Seal
from $15.29
(1)
Multi Purpose Seal
“Will buy here first from now on.”