from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$31.99

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

from

$30.99

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

Phosphorus replacement technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
Part synthetic oil: GTX High Mileage Engine Oil is a part synthetic oil that provides extra protection for older vehicles, making it an ideal choice for high mileage engines.
Protects against sludge, wear and burn-off: This synthetic blend engine oil helps extend the life of your engine by protecting against sludge, wear and burn-off, ensuring that your engine runs smoothly for longer.

from

$13.49

Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).

Product Features:

Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA C5, Ford WSS-M2C960-A1, Meets engine test performance of Chrysler MS-6395
10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
6X Better Wear Protection (Based on Seq IVA vs. latest test limit)

from

$24.99

When the going gets tough, the tough get Valvoline Premium Blue. This premium heavy duty engine oil features proprietary One Solution GEN2 Technology designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications. Our patented, formula is engineered to outperform: resisting oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for hot weather operations to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.

Product Features:

EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
RESISTS OXIDATION AND FIGHTS DEPOSITS with high quality base oils and special inhibitors
PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
PROPRIETARY ONE SOLUTION GEN2 TECHNOLOGY designed to protect hardworking diesel, gasoline and natural gas engines in both on-highway and off-highway applications
UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher

from

$13.49

Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).

Product Features:

Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA A5/B5, ACEA C2, Ford WSS-M2C961-A1, Meets engine test performance of Chrysler MS-6395 and MS-13340
10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
6X Better Wear Protection (Based on Seq IVA vs. latest test limit)

from

$35.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil is a premium-quality passenger car motor oil recommended by Ford Motor Company and meets all warranty requirements. It is API Certified for gasoline engine service ILSAC GF-5 and meets API SN/Resource Conserving and SN PLUS. Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality, synthetic/hydroprocessed base oils and specially designed performance additives, which help minimize engine deposits and wear, protect against high-temperature oxidation and turbocharger deposits, low-temperature gelling, rust corrosion and foaming.

Product Features:

Meets WSS-M2C945-B1 and SN PLUS, therefore it can reduce oil derived low speed pre-ignition
The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics
Significant improvement in fuel economy when compared to SAE 5W-30 and 10W-30 motor oils
Ford Recommended: The only motor oil recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles, ensuring optimal performance and compatibility.
Premium Quality: Motorcraft« SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality synthetic/hydroprocessed base oils and specially designed performance additives.
Engine Protection: Helps minimize engine deposits and wear while protecting against high-temperature oxidation, turbocharger deposits, low-temperature gelling, rust corrosion, and foaming.
5 Quart Convenience: Available in a convenient 5-quart container, making it easy to perform oil changes on your Ford, Lincoln, or Mercury vehicle.

from

$37.99

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
6X Better Wear Protection
1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
Advanced Fluid TITANIUM Technology: Castrol EDGE with Fluid TITANIUM Technology transforms its structure under pressure to keep metal parts apart and reduce friction, ensuring maximum engine performance.
Full Synthetic Composition: As a full synthetic motor oil, Castrol EDGE 5W-20 offers enhanced performance and protection compared to conventional oils.
Optimal for Modern Engines: Designed to meet the demands of today’s smaller, more powerful engines, ensuring they run smoothly and efficiently under intense conditions.

from

$34.99

When it comes to heavy-duty diesel and gasoline engines, freezing temperatures and hot weather operations call for a motor oil engineered for the extreme. Valvoline Premium Blue Extreme SAE 5W-40 Full Synthetic Engine Oil is designed for severe conditions and service. It provides performance, protection and advanced fuel economy (up to 1.5% over 15W-40 conventional oils in on-highway operation) in modern emissions treatment equipped diesel engines, including those with Exhaust Gas Recirculation (EGR) and Diesel Particulate Filters (DPF). Our superior synthetic base stocks and additive technology resists oxidation, deposits, corrosion and wear better than industry standards. No wonder it’s The Only One exclusively endorsed and recommended by Cummins for both on road and off highway applications. It’s specially formulated for faster and safer cold starts and has enhanced thermal properties for high temperatures during hot weather to help ensure year-round performance. Plus, extended drain intervals reduce oil changes so your engine can work longer between downtime.

Product Features:

EXCELLENT WEAR PROTECTION IN HEAVY DUTY APPLICATIONS that can take a toll on critical internal moving parts
RESISTS OXIDATION AND FIGHTS DEPOSITS & SLUDGE with higher quality synthetic base oils and special inhibitors
PROTECTS DURING COLD START UPS WHILE CONTROLING SOOT as heavy-duty equipment can sit idle for extended periods of time
ADVANCED FUEL ECONOMY up to 1.5% over 15W-40 conventional oils in on-highway operations
UNIQUE 5,000 MILES OIL DRAINS EXTENSION in Cummins X15/X12 engines when average is 7mpg or higher

from

$9.99

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

from

$9.49

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. 5W20 and 5W30 oils available in 5 qt. jugs. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft Full Synthetic Oils provide the highest level of performance for Ford Motor Company vehicles. Meets ILSAC GF-5 certification requirements. Excellent for use in severe service conditions. 5W50 Full Synthetic is recommended for use in the Ford GT, Shelby GT500TM and Boss 302. Motorcraft Super Duty and Full Synthetic Diesel Oils are designed for new generation, low emission diesel engines. Meets API Service Category CJ-4. 15W40 Super Duty Diesel oil available in 5 quart jugs. 5W40 Full Synthetic Diesel Motor Oil helps provide a high level of protection.

Product Features:

Meets WSS-M2C945-B1 and SN PLUS, therefore it can reduce oil derived low speed pre-ignition
The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics
Significant improvement in fuel economy when compared to SAE 5W-30 and 10W-30 motor oils
Ford Recommended: The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles, ensuring optimal performance and compatibility.
Meets Certification Requirements: Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements, guaranteeing high-quality standards.
Engine Protection: Helps minimize engine deposits and wear while preventing oxidation and rust corrosion, extending engine life.
Versatile Oil Options: Available in 5W20 and 5W30 oils in 5 qt. jugs, catering to different engine needs and preferences.
Severe Service Conditions: Excellent for use in severe service conditions, providing reliable performance under demanding circumstances.

from

$11.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, making it the perfect choice for high mileage vehicles.

from

$9.99

Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

Premium-quality base oils and anti-wear additives that help extend the life of your engine
1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
Double-Action Formula: Castrol Ultraclean’s unique double-action formula effectively cleans away existing sludge and prevents new sludge formation, ensuring optimal engine performance.
Enhanced Engine Life and Performance: Designed to combat environmental factors like poor fuel quality, hot weather, and stop-start driving conditions, which can reduce engine life, power, and fuel economy.
Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils, offering superior protection and performance in a 5W-30 SAE oil weight.
Cleanest GTX Ever: Marketed as Castrol’s cleanest GTX oil, ensuring that no other oil keeps engines cleaner, making it an ideal choice for maintaining engine cleanliness and efficiency.

from

$38.99

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

Patented phosphorus replacement technology to help extend the life of your emission system
10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
6x better wear protection (as measured in latest sequence iva engine test)
1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.

from

$10.49

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

Phosphorus replacement technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs

from

$35.99

Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality light- and heavy-duty diesel engine oil recommended by Ford Motor Company. It is particularly recommended for use in Ford vehicles equipped with Power Stroke® Diesel engines, as well as in other diesel engine applications where the manufacturer recommends an oil of this viscosity grade and quality. It meets Ford WSS-M2C171-F1, required for use in Power Stroke® Diesel engines designed to meet 2017 on-highway exhaust emission standards and requiring ultralow sulfur diesel fuel as well as meeting the requirements for previous model year diesel engines

Product Features:

Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology.
It satisfies the warranty requirements of Ford Motor Company, as well as most other domestic and import diesel engine manufacturers. It meets the requirements of Cummins CES 20086, Detroit Diesel 93K222, Volvo VDS-4.5, Mack EOS-4.5 and API Service CK-4
Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil is formulated for improved oxidation protection and contains more than 1000 ppm phosphorus to improve wear protection.
Designed for low emission diesel engines providing excellent soot control, protection against wear, deposits, rust and corrosion, foaming, sludge formation, high temperature oxidation and thickening, as well as protecting exhaust aftertreatment systems su
Do not use in gasoline engines equipped with catalysts
Provides excellent performance in older-generation diesel engines operating on high-sulfur fuel

from

$29.99

Valvoline Daily Protection Motor Oil is specially formulated to exceed industry standards for wear, deposit and sludge protection to help keep engines running like new. Developed with high quality additives and premium base oils, it’s designed to flow easily at cold temperatures, reducing wear at startup and providing added protection against motor oil breakdown in tough conditions. For enhanced fuel efficiency, choose Daily Protection Synthetic Blend 5W-20 or 5W-30. Developed with low-friction technology to support strong fuel economy.

Product Features:

Extra wear protection designed to help keep automotive engine parts like new
Added detergents help protect against sludge and deposits
High quality additives resist motor oil breakdown in tough conditions
Low-friction formula supports strong fuel efficiency
Premium formulation flows easily at low temperatures reducing wear at start-up

from

$37.99

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
6x better wear protection
1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.

from

$11.49

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
40% better wear protection vs. industry standard as tested in the sequence ivb engine test
25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
Exceptional high/low temperature protection defends your motor no matter the weather conditions
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.

from

$29.99

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Premium-quality base oils and anti-wear additives that help extend the life of your engine
Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

from

$37.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repair

from

$10.49

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils to provide superior protection against sludge, wear, and burn-off, extending the life of your high mileage engine.
High Mileage Engine Care: Designed for vehicles with high mileage, offering enhanced protection to keep your engine running smoothly and efficiently.
Optimal Viscosity: With an SAE oil weight of 5W-20, this motor oil ensures optimal performance and protection in a wide range of temperatures and driving conditions.

from

$11.49

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

from

$30.99

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

Phosphorus replacement technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

from

$11.99

CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.

Product Features:

3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
6x better wear protection – as measured in seq iva test vs. latest test limit
Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.

from

$41.99

Castrol EDGE Extended Performance with Fluid TITANIUM Technology, is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance. Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear. Unlock maximum engine performance.

Product Features:

Extended drain interval of 20,000 miles or a full year (Whichever comes first)
10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

from

$7.09

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. 5W20 and 5W30 oils available in 5 qt. jugs. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft Full Synthetic Oils provide the highest level of performance for Ford Motor Company vehicles. Meets ILSAC GF-5 certification requirements. Excellent for use in severe service conditions. 5W50 Full Synthetic is recommended for use in the Ford GT, Shelby GT500TM and Boss 302. Motorcraft Super Duty and Full Synthetic Diesel Oils are designed for new generation, low emission diesel engines. Meets API Service Category CJ-4. 15W40 Super Duty Diesel oil available in 5 quart jugs. 5W40 Full Synthetic Diesel Motor Oil helps provide a high level of protection.

Product Features:

Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality light- and heavy-duty diesel engine oil recommended by Ford Motor Company. It is particularly recommended for use in Ford vehicles equipped with Power Stroke« Diesel engines, as well as
Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is a high-quality diesel engine oil formulated with premium hydroprocessed base oils and unique additive technology. It satisfies the warranty requirements of Ford Motor Company, as well as most other dom
Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is formulated for improved oxidation protection and contains more than 1000 ppm phosphorus to improve wear protection. Designed for low emission diesel engines providing excellent soot control, protection
Motorcraft« SAE 10W-30 Super Duty Diesel Motor Oil is recommended for use in 7.3L, 6.4L and 6.0L Powerstroke« diesel engines from 0 Deg. F (-18 Deg. C) to 50 Deg. F (10 Deg. C) and 6.7L Powerstroke« diesel engines above 0 Deg. F (-18 Deg. C)
Do not use in gasoline engines equipped with catalysts

from

$9.99

Castrol Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

Premium-quality base oils and anti-wear additives that help extend the life of your engine
1.4x superior sludge protection compared to tough industry standards, as measured in the sequence vh sludge test vs. api sp test limits
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs
Unsurpassed thermal breakdown protection: GTX Engine Oil, 5W-20 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.

2000 Ford F-550 Super Duty Oil and Lubricants

More 2000 Ford F-550 Super Duty Oil and Lubricants Categories

Essential 2000 Ford F-550 Super Duty Oil and Lubricants

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 5 Quart (Part No.782253)

Castrol – GTX High Mileage 5W-20 Synthetic Blend Engine Oil: 5 Quart (Part No.1597C4)

Castrol – EDGE Extended Performance Full Synthetic 5W20 Motor Oil 1 Quart (Part No.15D529)

Valvoline – Premium Blue One Solution GEN2 Conventional 15W-40 Engine Oil: Endorsed by Cummins, 1 Gallon (Part No.773780)

Castrol – EDGE Extended Performance Full Synthetic 5W30 Motor Oil 1 Quart (Part No.15D47E)

Motorcraft – Synthetic Blend 5W20 Motor Oil: Original Equipment for Ford Motor Company Vehicles, 5 Quart (Part No.XO-5W20-5Q3SP)

Castrol – EDGE 5W-20 Advanced Full Synthetic Motor Oil: 5 Quart (Part No.15B9AD)

Valvoline – Premium Blue Extreme Heavy Duty Full Synthetic 5W-40 Engine Oil: For Diesel Engines, 1 Gallon (Part No.774038)

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 5W-20 Engine Oil: Maximize Engine Life, 1 Quart (Part No.609506)

Motorcraft – Synthetic Blend 5W20 Motor Oil: Original Equipment for Ford Motor Company Vehicles, 1 Quart (Part No.XO-5W20-Q1SP)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-20 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.849644)

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: No Oil Keeps Engines Cleaner, 1 Quart (Part No.15A66C)

Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.15906D)

Castrol – GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6A)

Motorcraft – Super Duty 10W-30 Conventional Heavy Duty Diesel Engine Oil, 5 Quart (Part No.XO-10W30-5Q3SD)

Valvoline – Daily Protection 5W-20 Synthetic Blend Motor Oil, Easy Pour 5 Quart (Part No.881158)

Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.1598B1)

Valvoline – Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV955)

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.813531)

Castrol – GTX High Mileage Synthetic Blend 5W-20 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.15B6E6)

Valvoline – Advanced Full Synthetic 5W-20 Motor Oil: Maximizes Engine Life, 1 Quart (Part No.VV927)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart (Part No.15980E)

Castrol – EDGE 5W-20 Full Synthetic Engine Oil 1 Quart (Part No.152C82)

Castrol – EDGE Extended Performance 5W-30 Advanced Full Synthetic Motor Oil: 5 Qt (Part No.1597B1)

Motorcraft – Super Duty 10W-30 Conventional Heavy Duty Diesel Engine Oil, 1 Quart (Part No.XO-10W30-QSDF)

Castrol – 1 Qt Full Synthetic 5W-20 Engine Oil – 3X Stronger Against Viscosity Breakdown (Part No.15B743)

Popular 2000 Ford F-550 Super Duty Oil and Lubricants Categories

2000 Ford F-550 Super Duty Oil and Lubricants

Top-Rated Oil and Lubricants Brands For Your 2000 Ford F-550 Super Duty

Popular Castrol Oil and Lubricants

Top-Rated Valvoline Oil and Lubricants

FAQs for 2000 Ford F-550 Super Duty Oil and Lubricants

What are the most purchased Oil and Lubricants for the 2000 Ford F-550 Super Duty?

What are the top-rated 2000 Ford F-550 Super Duty Oil and Lubricants?

More Popular Parts for All Makes