2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2000 E-150 Econoline Club Wagon. Advance Auto Parts has popular E-150 Econoline Club Wagon parts like Oxygen Sensors, Gas Caps, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other E-150 Econoline Club Wagon model years including 1985, 2001, 2002 and more. Select a category of 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems below and start saving instantly.

Popular 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems Categories

Diesel Injector Driver Modules

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Fuel Pumps

Oxygen Sensors

Vapor Canister Vent Solenoids

Vacuum Reservoirs

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Fuel Pump Hanger Assemblies

Idle Air Parts

Vapor Canisters

Ambient Air Temperature Sensor Connectors

Fuel Tank Sender Assemblies

EGR Pressure Feedback Hoses

Fuel Tank Pressure Sensors

Pressure Regulators

Air Charge Temperature Sensors

Fuel Injection Idle Air Control Valves

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Injection Idle Air Control Valve Gaskets

Fuel Tank Straps

Fuel Injector Gaskets

EGR Lines

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Tank Vent Valves

EGR Valve Control Switches

Mass Air Flow Sensor Connectors

Fuel Line Connectors

Fuel Pump Tank Seals

Oxygen Sensor Connectors

Idle Air Control Valve Connectors

EGR Tubes

EGR Valve Gaskets

Fuel Pump Harness Connectors

EGR Vacuum Regulator Solenoid Connectors

Fuel Injector Set

Fuel Cap Tester Adapters

EGR Valve Spacer Plates

EGR Sensor Connector

Fuel Tank Vent Valve Seals

Vacuum Actuators

Essential Fuel and Emissions Systems for 2000 Ford E-150 Econoline Club Wagons

from

$16.99

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$46.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$223.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$439.99

The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Includes eight premium fuel injectors
Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$102.99

Product Features:

1in. Thick For 2-Barrel Carburetors
EGR Plate is made of aluminum with a natural finish
Covered when it comes to affordable performance
Fuel delivery style is fuel-injected
Throttle bodies are used with suitable EGR plates

from

$63.99

REGULATOR-WINDW

from

$61.99

This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.

Product Features:

Direct replacement – this exhaust gas recirculation line is designed to match the fit and function of the original equipment EGR line
Ideal solution – engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$107.99

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

from

$96.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$134.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$78.99

This replacement A/C vacuum actuator is engineered to match the fit and function of the original equipment vacuum actuator on specified vehicles. Made of quality materials, it’s designed for a reliable service life.

Product Features:

Ideal replacement – this A/C vacuum actuator directly replaces the original equipment actuator on specified vehicle years, makes and models
Durable construction – this vacuum actuator is made of quality materials for reliable performance
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$135.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump and sender assemblies meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Product comes with installation instructions, wiring harness and installation hardware where applicable
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Precision tested fuel level sensor ensures vehicles fuel gauge will provide an accurate reading at any fuel level
Tested for voltage, amperage, resistance, pressure, and volume to ensure product performance and quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Award winning packaging; double layer walls for added strength and projection; new inflated bubble packaging-condensed individual vertical air chambers for added protection
Engineered and developed by Spectra Premium; proud member of the AASA fuel pump manufacturers working group

from

$2000.00

New Platinum Pro Fuel Tank, Rear, 37 Gallon

Product Features:

Rear, 37 Gallon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$16.99

Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:

Engineered to meet or exceed all OEM specifications.

from

$88.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$79.99

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
Meets or exceeds all OEM specifications

from

$17.29

This fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles. It is engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged. Manufactured to precise specifications for specified vehicles, it is made with durable materials for reliable performance and long life.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is designed to help restore the connection between the fuel pump, module and/or sending unit and the fuel tank on specified vehicles
Ideal solution – engineered to match the performance of the original equipment lock ring when the factory ring has failed or is damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$27.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$6.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$72.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$3.99

The Fuel Injection Idle Air Control Valve controls the engine idle speed by allowing air to bypass the closed throttle plate. The idle air control valve gasket should be replaced any time the valve is removed for cleaning or service.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$149.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

Upgrade your 2000 Ford E-150 Econoline Club Wagon with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2000 Ford E-150 Econoline Club Wagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your E-150 Econoline Club Wagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 134 Fuel and Emissions Systems for the 2000 Ford E-150 Econoline Club Wagon, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2000 Ford E-150 Econoline Club Wagon at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.99 to $2,000.00, with an average price of $98.95. Our 134 Fuel and Emissions Systems in stock come from 20 trusted brands, so you’re sure to find the right part for your 2000 Ford E-150 Econoline Club Wagon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Ford E-150 Econoline Club Wagon, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Carquest Premium, Delphi, and more. FELPRO Fuel and Emissions Systems start at just $2.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $21.99, and at an average 4.4 stars rating. With 2,160 customer reviews and counting, our 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Ford E-150 Econoline Club Wagon is always ready to roll. We’re committed to providing you with everything you need to keep your E-150 Econoline Club Wagon in top shape, all in one place. Start shopping confidently below for your 2000 Ford E-150 Econoline Club Wagon!

Best-Selling Oxygen Sensors for 2000 Ford E-150 Econoline Club Wagons

Enhance the driving experience in your Ford with 16 quality Oxygen Sensor components, starting at $27.99.

show more show less

from

$72.99

O2 Sensor

from

$59.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead poisoning for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$66.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$61.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$64.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$50.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$50.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$79.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$57.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$81.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$69.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$129.99

O2 Sensor

from

$27.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$59.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$51.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$58.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Most Popular 2000 Ford E-150 Econoline Club Wagon Gas Caps

Customize your Ford with 2 Gas Caps products like Gas Caps, all priced under $30.49.

show more show less

from

$20.99

Product Features:

Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Top Picks for 2000 Ford E-150 Econoline Club Wagon Fuel Pumps

Upgrade Ford E-150 Econoline Club Wagons with top-quality Fuel Pumps parts, including 20 OEM and aftermarket selections for your 2000 model.

show more show less

from

$23.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$21.99

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$245.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$100.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$124.99

As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$104.99

Our team of Bosch Engineers brings the benefits of premium fuel pumps to the Automotive Aftermarket. Bosch fuel pumps are produced in the same production lines and are built then tested to the same exacting quality standards as Bosch OE fuel pumps to ensure a long, reliable service life. Get the job done right the first time, every time, with Bosch Premium fuel pumps.

Product Features:

Bosch “Better than OE design”, improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
Electromagnetic shielding prevents on-board electronic interference from fuel pump
Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.

from

$98.99

Bosch “Better than OE design”, improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
Electromagnetic shielding prevents on-board electronic interference from fuel pump
Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.

from

$199.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$53.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested.

from

$224.99

Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$251.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$66.99

New Platinum Pro Electric Fuel Pump

Product Features:

With Wide Terminals
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$224.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$70.99

New Platinum Pro Electric Fuel Pump, New Strainer Required For Warranty

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$223.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$212.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$207.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$58.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$36.49

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Fuel Injectors for 2000 Ford E-150 Econoline Club Wagons

Select from 28 premium Fuel Injectors parts for your 2000 Ford E-150 Econoline Club Wagon, with prices ranging from $2.99 to $499.99.

show more show less

from

$81.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$95.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$4.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$88.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$227.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$222.99

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$89.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$8.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$111.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$9.99

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$93.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$10.29

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$57.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$81.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$71.99

Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$61.99

from

$126.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$499.99

Includes eight premium fuel injectors
Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$182.99

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$144.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

Most Sold 2000 Ford E-150 Econoline Club Wagon Air Flow Sensors

Explore our best-selling Ford parts for the 2000 E-150 Econoline Club Wagon among 7 OEM and aftermarket options starting from $13.99.

show more show less

from

$33.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air or fuel mixture for maximum fuel efficiency.
NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.

from

$13.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.79

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$29.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$69.99

Wire Assembly

Top-Rated Fuel and Emissions Systems Brands For Your 2000 Ford E-150 Econoline Club Wagon

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2000 Ford E-150 Econoline Club Wagons. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Carquest Premium, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 2000 E-150 Econoline Club Wagon start at just $2.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2000 Ford E-150 Econoline Club Wagon, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2000 Ford E-150 Econoline Club Wagon. With over 3 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $4.26. Plus, with over 48 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $4.29

(1)

Fuel Injection Throttle Body Mounting Gasket

“exact replacement for original”

from $2.99

(8)

Fuel Injection Throttle Body Mounting Gasket

“It fit 05 f150 perfectly like it should.”

from $5.49

(39)

Exhaust Gas Recirculation (EGR) Valve Gasket

“Great product”

Popular Carquest Premium 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2000 Ford E-150 Econoline Club Wagon owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2000 E-150 Econoline Club Wagon, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $23.99 to $95.99, plus, with more than 9 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $81.99

(4)

Reman Multi Port Fuel Injector

“Great product. shipping was quick”

from $95.99

(1)

New Mass Air Flow Sensor – Complete Assembly

“Product comes with both the MAF sensor and the housing for it. purchased for a 2003 Ford Ranger 3.0L and upon installing I realized the housing is WAY”

from $23.99

(4)

Fuel Pump Strainer FS260347

“Perfect fit product is easy to install on new pump. Although, you would think it should come with pump, since it is required for warranty on new pump.”

FAQs for 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2000 Ford E-150 Econoline Club Wagons?

Out of 134 Fuel and Emissions Systems that fit 2000 Ford E-150 Econoline Club Wagons, the following parts are the top sellers:

Fuel Injector O-Ring Kit (3504360) – $8.49
O2 Sensor (11977682) – $72.99
Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (20501734) – $66.99

What’s the price range for 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2000 Ford E-150 Econoline Club Wagon start at $2.99 and go up to $2,000.00 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2000 Ford E-150 Econoline Club Wagon?

The average price for Fuel and Emissions Systems for the 2000 Ford E-150 Econoline Club Wagon is $98.95. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford E-150 Econoline Club Wagon model years?

Yes, we currently carry Fuel and Emissions Systems for 2 model years of Ford E-150 Econoline Club Wagons between 1985 and 2002. Fuel and Emissions Systems are bought most frequently for the following model years: 2002, 2001, and 1985.

What are the cheapest Fuel and Emissions Systems for my 2000 Ford E-150 Econoline Club Wagon?

The cheapest 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems we carry in stock are:

Fuel Injection Throttle Body Mounting Gasket (15780628) – $2.99
Fuel Injection Idle Air Control Valve Gasket (12547257) – $2.99
THROTTLE BODY GASKET SET (20688609) – $3.29
Gasket (10307523) – $3.99
Fuel Injection Idle Air Control Valve Gasket (50047315) – $3.99

What are the top-rated Fuel and Emissions Systems that fit the 2000 Ford E-150 Econoline Club Wagon?

Out of 2,160 reviews by customers, our 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2000 Ford E-150 Econoline Club Wagon and their top-rated products:

Idle Air Control Parts
- Gasket (10307523) – $3.99
- THROTTLE BODY GASKET SET (20688609) – $3.29
- Idle Air Valve Gaskets (17191248) – $4.99

What types of Fuel and Emissions Systems do you sell for my 2000 Ford E-150 Econoline Club Wagon?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2000 Ford E-150 Econoline Club Wagon:

Can I get help with 2000 Ford E-150 Econoline Club Wagon Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford E-150 Econoline Club Wagon Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford E-150 Econoline Club Wagon Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Ford E-150 Econoline Club Wagon Fuel and Emissions Systems

Dorman – Springlock Fuel Line Connector- 14mm x 5/16In. Barbed Male (Part No.800-131)

Carquest Premium – Multi-Use Connector (Part No.PTA1191)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Bolts, Washers, Retainer Clips (Part No.HP10080)

Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-1112-8PK)

Edelbrock – EGR Valve Spacer Plate #8057 For Ford Small-Block Windsor 2V (Part No.8057)

Motorcraft – REGULATOR-WINDW (Part No.WPT-359)

Dorman – Exhaust Gas Recirculation Tube (Part No.598-154)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Vapor Canister (Part No.CPN1148)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1054)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Carquest Premium – Fuel Pump (Part No.E2541177)

Dorman – Heater Blend Door Actuator (Part No.926-180)

ACDelco – Multi-Purpose Pigtail (Part No.PT2164)

Spectra Premium – Fuel Pump and Sender Assembly (Part No.SP2224H)

KAI – Fuel Tank (Part No.FTK010677)

Carquest Premium – Fuel Pump Tank Seal (Part No.TS3541875)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECC1013)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1107)

Dorman – Help – Fuel Sending Unit Retainer Assortment (Part No.55812)

Carquest Premium – Multi-Use Connector (Part No.PTA1116)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1037)

Dorman – Exhaust Gas Recirculation Valve (Part No.911-432)

Carquest Premium – Fuel Injection Idle Air Control Valve Gasket (Part No.ABA1159)

Carquest Premium – Multi-Use Connector (Part No.PTA1213)

Dorman – Help – Vacuum Storage Canister (Part No.47995)

Dorman – Help – Idle Air Valve Gaskets (Part No.90102)

Spectra Premium – Fuel Filler Neck (Part No.FN582)

Motorcraft – O2 Sensor (Part No.DY-1401)

DENSO – Oxygen Sensor: 4 Wire, 18.82" Long, Heated, Exact Fit (Part No.234-4127)

NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)

Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)

NTK – Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No.22060)

Bosch – Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.15716)

Bosch – Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No.15718)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)

DENSO – Oxygen Sensor: 4 Wire, 10.83" Long, Heated, Exact Fit (Part No.234-4071)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)

Motorcraft – O2 Sensor (Part No.DY-835)

Carquest Premium – Multi-Use Connector (Part No.PTA1116)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.234-4046)

DENSO – Oxygen Sensor: 4 Wire, 18.11" Long, Heated, Exact Fit (Part No.234-4609)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 18.90" Long, Heated, Exact Fit (Part No.234-4045)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10832)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC832T)

Carquest Premium – Fuel Pump Strainer FS260347 (Part No.FS260347)

Delphi – Fuel Pump Strainer (Part No.FS0108)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Seal, Nuts, Washers, Retainer Clips (Part No.HP10081)

Delphi – Electric Fuel Pump: With Hose Clamps, Insulating Sleeve, Jump Harnesss, Retaining Clips, Seals (Part No.FE0479)

DENSO – Original Equipment Quality Electric Fuel Pump (Part No.951-0008)

Bosch – Electric Fuel Pump, In-Tank (Part No.69128)

Bosch – Electric Fuel Pump, In-Tank (Part No.69131)

Carquest Premium – Fuel Pump Hanger Assembly HS3521070: Fuel Pump, Sending Unit and Strainer (Part No.HS3521070)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E2290673)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2480510)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Bolts, Washers, Retainer Clips (Part No.HP10127)

KAI – Electric Fuel Pump (Part No.FMD010433)

Carquest Premium – Fuel Pump Strainer FS260363 (Part No.FS260363)

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.HS2521081)

KAI – Electric Fuel Pump (Part No.FMD010055)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Bolts, Washers, Retainer Clips (Part No.HP10080)

Carquest Premium – Fuel Pump Hanger Assembly HS2521069: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.HS2521069)

Delphi – Fuel Pump Hanger Assembly: With Float Arm, Bolts, Washers, Retainer Clips (Part No.HP10086)

Carquest Premium – Multi-Use Connector (Part No.PTA2964)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)

Carquest Premium – Reman Multi Port Fuel Injector (Part No.A211-1242)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61050)

Carquest Premium – New Mass Air Flow Sensor – Complete Assembly (Part No.MQ7382)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61052)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61103)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Carquest – Fuel Injector (Part No.57045)

Delphi – Mass Air Flow Sensor (Part No.AF10127)

Delphi – Mass Air Flow Sensor (Part No.AF10131)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6215)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6211)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)