2000 Chrysler Sebring Belts and Hoses

Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.31" Diameter
Brand: Dayco
SKU: E72645
Price: 118.99 USD

Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 2000 Sebring. Advance Auto Parts has popular Sebring parts like Engine Cooling Hoses, Heater Hoses, Radiator Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Sebring model years including 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 2000 Chrysler Sebring Belts and Hoses below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 Chrysler Sebring Belts and Hoses Categories

Serpentine Belts

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

Transmission Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2000 Chrysler Sebrings

from

$118.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$44.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

It is used in cars and trucks when the original quick connector fails or the replacement hose does not include it.
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fits like the original quick-connect fittings for easy installation and removal

from

$29.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation – the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$87.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$23.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$36.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$26.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$16.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$31.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$20.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Plastic And Metal Construction
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$35.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$23.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$32.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$52.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Replacing the tensioner is recommended (if the vehicle is equipped with one).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$18.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$59.99

The special construction of the belt eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$49.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Size: 1/2 in. x 12′
Designed for engine oil applications
12′ hose length accommodates most applications
Medium duty applications

from

$59.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Used on Chevrolet V8 applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail
Comes with all parts needed for the job

from

$61.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Mitsubishi . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$49.49

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include Hyundai/Kia . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$45.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$92.99

This Litens pulley is manufactured by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . The Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. NOTE: This pulley has been recently upgraded to a “pulley assembly” by including preassembled attachment hardware to improve ease of installation and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
Heavy Duty steel pulley with a long lasting automotive bearing.
Precision steel stamping with close tolerance ball bearing pocket. Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.
97.6mm O.D.; 10.mm I.D (with bushing); 25.9mm width; smooth running surface; high-grade steel construction. For use with a 4- rib serpentine belt.

from

$61.99

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$57.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$28.99

Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

Upgrade your 2000 Chrysler Sebring with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2000 Chrysler Sebring, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your Sebring functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Belts and Hoses for the 2000 Chrysler Sebring, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2000 Chrysler Sebring at great prices. Our Belts and Hoses inventory for this model ranges from just $14.49 to $60.99, with an average price of $33.87. Our 32 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2000 Chrysler Sebring without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chrysler Sebring, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, Driveworks, and more. Litens Belts and Hoses start at just $30.99 and boast an impressive 4.7 stars average rating from customers. Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $15.49, and at an average 4.5 stars rating. With 1,144 customer reviews and counting, our 2000 Chrysler Sebring Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chrysler Sebring is always ready to roll. We’re committed to providing you with everything you need to keep your Sebring in top shape, all in one place. Start shopping confidently below for your 2000 Chrysler Sebring!

Best-Selling Engine Cooling Hoses for 2000 Chrysler Sebrings

Enhance the driving experience in your Chrysler with 5 quality Engine Cooling Hose components, starting at $14.49.

show more show less

from

$31.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$29.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$40.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$24.79

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$14.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Most Popular 2000 Chrysler Sebring Heater Hoses

Customize your Chrysler with 5 Heater Hoses products like Heater Hoses and Heater Hose Fittings, all priced under $44.49.

show more show less

from

$33.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

It is used in cars and trucks when the original quick connector fails or the replacement hose does not include it.
Manufactured w/ a new design that retains the O-ring so they cannot get lost or damaged
Fits like the original quick-connect fittings for easy installation and removal

from

$33.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$44.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$32.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Top Picks for 2000 Chrysler Sebring Radiator Hoses

Upgrade Chrysler Sebrings with top-quality Radiator Hoses parts, including 2 OEM and aftermarket selections for your 2000 model.

show more show less

from

$31.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transport applications.

In-Demand Serpentine and V Belts for 2000 Chrysler Sebrings

Select from 11 premium Serpentine and V Belts parts for your 2000 Chrysler Sebring, with prices ranging from $15.49 to $38.49.

show more show less

from

$32.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$29.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$31.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$17.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$15.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$23.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$38.49

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$32.99

Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

from

$31.99

The special construction of the belt eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications
It is recommended to replace the tensioner (if equipped).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Most Sold 2000 Chrysler Sebring Pulleys

Explore our best-selling Chrysler parts for the 2000 Sebring among 6 OEM and aftermarket options starting from $14.99.

show more show less

from

$30.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$57.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$14.99

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.99

Plastic And Metal Construction
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$60.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications on Dodge/Chrysler with 2.5L engines (A/C Drive pulley). The heavy duty steel pulley conforms to original equipment material, tolerances, and specifications. This replacement part is made to the O.E. specified design and meets all performance and durability requirements. Pulley is supplied with a new steel washer as well as a new I.D. insert reduction bearing for proper fit and quiet performance. Installation requires re-use of the pulley tightening hardware. Most common O.E. Number – MR315825 Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$45.99

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Belts and Hoses Brands For Your 2000 Chrysler Sebring

Shop for the best-rated brands offering Belts and Hoses and other products for your 2000 Chrysler Sebrings. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2000 Sebring start at just $15.49 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2000 Chrysler Sebring Belts and Hoses

When it comes to maintaining or upgrading your 2000 Chrysler Sebring, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2000 Chrysler Sebring. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.99. Plus, with over 1 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $30.99

(1)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

“Good product at a decent price”

Popular Dayco 2000 Chrysler Sebring Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2000 Chrysler Sebring owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2000 Sebring, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Dayco Belts and Hoses range from $31.99 to $35.99, plus, with more than 80 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $31.99

(8)

Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count

“Perfect fit […]”

from $32.99

(63)

Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count

“Product appearance and material show great product material and quality design”

from $35.99

(9)

Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count

“This is replacement part that is looks durable and was a perfect fit”

FAQs for 2000 Chrysler Sebring Belts and Hoses

Which Belts and Hoses are best-sellers for 2000 Chrysler Sebrings?

Out of 32 Belts and Hoses that fit 2000 Chrysler Sebrings, the following parts are the top sellers:

Transmission Oil Cooler Hose (5670022) – $32.49
Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (99984545) – $15.49
Idler Pulley, Dayco (15130007) – $57.99

What’s the price range for 2000 Chrysler Sebring Belts and Hoses?

Belts and Hose prices for the 2000 Chrysler Sebring start at $14.49 and go up to $60.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2000 Chrysler Sebring?

The average price for Belts and Hoses for the 2000 Chrysler Sebring is $33.87. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chrysler Sebring model years?

Yes, we currently carry Belts and Hoses for 14 model years of Chrysler Sebrings between 1995 and 2010. Belts and Hoses are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, and 2002.

What are the cheapest Belts and Hoses for my 2000 Chrysler Sebring?

The cheapest 2000 Chrysler Sebring Belts and Hoses we carry in stock are:

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.38" Diameter (19590436) – $14.49
Idler Pulley (Pulley only) (10041701) – $14.99
Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (99984545) – $15.49
Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (99984530) – $17.99
Quick-Lok Heater Hose Connector (10911688) – $19.79

What are the top-rated Belts and Hoses that fit the 2000 Chrysler Sebring?

Out of 1,144 reviews by customers, our 2000 Chrysler Sebring Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2000 Chrysler Sebring and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (20060958) – $32.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (5065100) – $29.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (3290118) – $35.99
Engine Cooling Hoses
- Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (20060958) – $32.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (5065100) – $29.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (3290118) – $35.99
Pulleys
- Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (20060958) – $32.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (5065100) – $29.99
- Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (3290118) – $35.99

What types of Belts and Hoses do you sell for my 2000 Chrysler Sebring?

As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 2000 Chrysler Sebring:

Can I get help with 2000 Chrysler Sebring Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.

What is your return policy for Chrysler Sebring Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chrysler Sebring Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Chrysler Sebring Belts and Hoses

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.31" Diameter (Part No.E72645)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.38" Diameter (Part No.E72476)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Gates – Premium Molded Heater Hose (Part No.18846)

Dorman – Molded Heater Hose: Steel (Part No.626-577)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.25" Diameter (Part No.C71907)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.31" Diameter (Part No.C70986)

Gates – Micro-V Serpentine Drive Belt (Part No.K040353)

Driveworks – V-Ribbed Belt, Driveworks (Part No.548K6)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-598)

Crown Auto Jeep Replacmnt – Single Belt, 3.55 Inch Diameter, Black, Steel (Part No.53002905)

Gates – Premium Molded Coolant Hose (Part No.22126)

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Dayco – Idler Pulley, Dayco (Part No.89097)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Gates – Micro-V Serpentine Drive Belt (Part No.K061015)

Driveworks – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.468K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K060695)

Driveworks – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.695K6)

Imperial – Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Litens – Tensioner Pulley: Direct Fit, Steel, 75mm Diameter (Part No.900219A)

Litens – Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900225A)

Dorman – Idler Pulley (Pulley Only) (Part No.419-633)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900215A)

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 90 mm Diameter (Part No.419-717)

Dayco – Idler Pulley, Dayco (Part No.89029)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.25" Diameter (Part No.C71765)

Gates – Premium Molded Coolant Hose (Part No.21508)

Gates – Premium Molded Coolant Hose (Part No.22121)

Gates – Premium Molded Coolant Hose (Part No.22130)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.38" Diameter (Part No.D71833)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length (Part No.86121)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.86126)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.86125)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 15 Inch Length (Part No.87619)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.25" Diameter (Part No.C71766)

Gates – Premium Molded Coolant Hose (Part No.20808)

Dayco – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.5040338)

Dayco – Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (Part No.5060560)

Driveworks – Poly Rib Belt Serpentine Belt; 56 Long, 6 Rib Count (Part No.560K6)

Dayco – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.5040382)

Driveworks – Poly Rib Belt Serpentine Belt; 38.2 Long, 4 Rib Count (Part No.382K4)

Dayco – Idler Pulley, Dayco (Part No.89097)

Driveworks – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.338K4)

Dayco – Poly Rib Belt, Premium, Dayco (Part No.5050580)

Gates – Micro-V Serpentine Drive Belt (Part No.K060563)

Carquest Standard – Serpentine Belt: 56.0" Long, 6 Rib Count (Part No.560K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K040384)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900055A)

Dayco – Idler Pulley, Dayco (Part No.89029)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Crown Auto Jeep Replacmnt – Single Belt, 3.55 Inch Diameter, Black, Steel (Part No.53002905)

Litens – Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900574A)

Dorman – Idler Pulley (Pulley Only) (Part No.419-633)