2004 Chrysler Sebring Belts and Hoses
Find Your Specific 2004 Chrysler Sebring Belts and Hoses
Below you will find various in-demand Chrysler Belts and Hoses, components and accessories for your 2004 Sebring. Advance Auto Parts has popular Sebring parts like Heater Hoses, Radiator Hoses, Fuel Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Sebring model years including
2001,
2002,
2003,
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2004 Chrysler Sebring Belts and Hoses below and start saving instantly.
Popular 2004 Chrysler Sebring Belts and Hoses Categories
Essential Belts and Hoses for 2004 Chrysler Sebrings
Dayco – Dayco Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth, 95168 (Part No.95168)
from
$31.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
See More
Dayco – Idler Pulley, Dayco, 89161 (Part No.89161)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dorman – Dorman Idler Pulley (Pulley only), 419-602 (Part No.419-602)
from
$14.99
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999276A (Part No.999276A)
from
$71.99
This Litens belt tensioner is manufactured by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada for Chrysler/Dodge. The aftermarket part maintains the belt-stretch indicator built into the original part as well as the cast-in locating pin for precise installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999258A (Part No.999258A)
from
$247.99
This Litens belt tensioner is manufactured by INA, the original equipment (O.E.) tensioner supplier. The tensioner meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This tensioner is designed for a wide variety of Chrysler /Dodge vehicles with 2.4L gas engines. Like the original part, this tensioner is manufactured in Europe to OE specifications. The Litens replacement part maintains the O.E. style polymer pulley with dust cap, an integrated lift feature, and an O.E. equivalent hydraulic strut.. Common O.E. Part Numbers: 04792495AC and 04792495AC Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Imperial – Imperial Metal Line Kit for Engine Oil Coolers, 240293 (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.50"" Long, 1.19"" Diameter, D71396" (Part No.D71396)
from
$36.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11"" Long, 1.25"" Diameter, C71765" (Part No.C71765)
from
$39.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 21508 (Part No.21508)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25253 (Part No.25253)
from
$28.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Dorman – Dorman Molded Heater Hose: Metal, 626-326 (Part No.626-326)
from
$156.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 25 Inch Length, 87606 (Part No.87606)
from
$33.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dorman – Dorman Fuel Filler Neck Hose, 573-052 (Part No.573-052)
from
$37.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
Dorman – Dorman Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter, 419-725 (Part No.419-725)
from
$18.79
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Single Belt, 3.55 Inch Diameter, Black, Steel, 53002905 (Part No.53002905)
from
$20.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22"" Long, 1.31"" Diameter, E71189" (Part No.E71189)
from
$14.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109" (Part No.E72109)
from
$58.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18"" Long, 1.25"" Diameter, E72129" (Part No.E72129)
from
$44.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Idler Pulley, Dayco, 89097 (Part No.89097)
from
$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Idler Pulley, Dayco, 89134 (Part No.89134)
from
$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060563 (Part No.K060563)
from
$41.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060470 (Part No.K060470)
from
$34.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 38.2 Long, 4 Rib Count, 5040382 (Part No.5040382)
from
$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 51 Long, 5 Rib Count, 510K5 (Part No.510K5)
from
$26.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 101.58 Long, 6 Rib Count, 1015K6 (Part No.1015K6)
from
$31.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Carquest Standard – "Carquest Serpentine Belt: 33.8"" Long, 4 Rib Count, 338K4" (Part No.338K4)
from
$18.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 38.58 Long, 4 Rib Count, 5040385 (Part No.5040385)
from
$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Upgrade your 2004 Chrysler Sebring with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2004 Chrysler Sebring, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Belts and Hoses are key to keeping your Sebring functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Belts and Hoses for the 2004 Chrysler Sebring, designed to meet your needs without breaking the bank.
From
Heater Hose
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2004 Chrysler Sebring at great prices.
Our Belts and Hoses inventory for this model
ranges from just $8.35 to $184.99, with
an average price of $39.22.
Our 79 Belts and Hoses in stock come from 9 trusted brands, so you’re sure to find the right part for your 2004 Chrysler Sebring without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chrysler Sebring, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $23.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $18.49, and at an average 4.5 stars rating.
With 3,283 customer reviews and counting, our 2004 Chrysler Sebring Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 Chrysler Sebring is always ready to roll. We’re committed to providing you with everything you need to keep your Sebring in top shape, all in one place.
Start shopping confidently below for your 2004 Chrysler Sebring!
Best-Selling Heater Hoses for 2004 Chrysler Sebrings
Enhance the driving experience in your Chrysler with 17 quality Heater Hose components, starting at $11.79.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length, 87675 (Part No.87675)
from
$32.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length, 87661 (Part No.87661)
from
$51.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 25 Inch Length, 87606 (Part No.87606)
from
$33.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dorman – Dorman Molded Heater Hose: Aluminum, 626-512 (Part No.626-512)
from
$184.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length, 80400 (Part No.80400)
from
$31.99
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 12 1/2 Inch Length, 87816 (Part No.87816)
from
$20.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 6.50"" Long, .63"" Diameter, B71231" (Part No.B71231)
from
$29.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length, 87817 (Part No.87817)
from
$11.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length, 87855 (Part No.87855)
from
$24.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dorman – Dorman Molded Heater Hose: Metal, 626-326 (Part No.626-326)
from
$156.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dorman – Dorman Molded Heater Hose: Steel, 626-577 (Part No.626-577)
from
$87.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 15 1/2 Inch Length, 87811 (Part No.87811)
from
$21.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 10 1/2 Inch Length, 87810 (Part No.87810)
from
$20.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dorman – Dorman Heater Hose Assembly, 626-308 (Part No.626-308)
from
$96.99
This engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.
See More
Gates – Gates Premium Molded Heater Hose, 18898 (Part No.18898)
from
$44.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 5 Inch Length, 87988 (Part No.87988)
from
$24.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Heater Hose, 19214 (Part No.19214)
from
$20.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Most Popular 2004 Chrysler Sebring Radiator Hoses
Customize your Chrysler with 8 Radiator Hoses products
like Coolant Hoses, all
priced under $58.99.
Dayco – Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051 (Part No.81051)
from
$25.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109" (Part No.E72109)
from
$58.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22"" Long, 1.31"" Diameter, E71189" (Part No.E71189)
from
$14.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.28"" Diameter, C71695" (Part No.C71695)
from
$37.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18"" Long, 1.25"" Diameter, E72129" (Part No.E72129)
from
$44.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates Premium Molded Coolant Hose, 22357 (Part No.22357)
from
$42.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 22183 (Part No.22183)
from
$45.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 22628 (Part No.22628)
from
$48.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Top Picks for 2004 Chrysler Sebring Fuel Hoses
Upgrade Chrysler Sebrings with top-quality Fuel Hoses parts, including 1 OEM and aftermarket selections for your 2004 model.
Dorman – Dorman Fuel Filler Neck Hose, 573-052 (Part No.573-052)
from
$37.99
Fuel filler neck leaking- This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.
See More
In-Demand Serpentine and V Belts for 2004 Chrysler Sebrings
Select from 34 premium Serpentine and V Belts parts for your 2004 Chrysler Sebring, with prices ranging from $16.79 to $61.99.
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (Part No.473K6)
from
$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 5060560 (Part No.5060560)
from
$41.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 560K6 (Part No.560K6)
from
$32.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 37.5 Long, 5 Rib Count, 5050375 (Part No.5050375)
from
$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 55.51 Long, 6 Rib Count, 555K6 (Part No.555K6)
from
$18.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Premium Balance Shaft Belt, 20.48 Inch With 65 Round Tooth, 95168 (Part No.95168)
from
$31.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 49.5 Long, 6 Rib Count, 5060495 (Part No.5060495)
from
$27.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Idler Pulley, Dayco, 89097 (Part No.89097)
from
$32.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 48.5 Long, 6 Rib Count, 5060485 (Part No.5060485)
from
$61.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 5060473 (Part No.5060473)
from
$36.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 48.5 Long, 6 Rib Count, 485K6 (Part No.485K6)
from
$23.29
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 55.51 Long, 6 Rib Count, 5060555 (Part No.5060555)
from
$34.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 35.5 Long, 4 Rib Count, 5040355 (Part No.5040355)
from
$38.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 54 Long, 5 Rib Count, 540K5 (Part No.540K5)
from
$20.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 49.5 Long, 6 Rib Count, 495K6 (Part No.495K6)
from
$19.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 35.5 Long, 4 Rib Count, 355K4 (Part No.355K4)
from
$16.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 54 Long, 5 Rib Count, 5050540 (Part No.5050540)
from
$39.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 38.8 Long, 4 Rib Count, 5040388 (Part No.5040388)
from
$31.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – V-Ribbed Belt, Driveworks, 375K5 (Part No.375K5)
from
$16.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060492 (Part No.K060492)
from
$35.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040353 (Part No.K040353)
from
$28.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060551 (Part No.K060551)
from
$49.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K040355 (Part No.K040355)
from
$48.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K050538 (Part No.K050538)
from
$43.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Most Sold 2004 Chrysler Sebring Belt Tensioners
Explore our best-selling Chrysler parts for the 2004 Sebring among 1 OEM and aftermarket options starting from $69.99.
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999683A (Part No.999683A)
from
$69.99
Litens Automotive is the original equipment supplier of this tensioner to Dodge/Chrysler. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The Litens replacement part maintains round wire spring, the dual integrated location pins, and the internal damping components specified by Chrysler Motors. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Top-Rated Belts and Hoses Brands For Your 2004 Chrysler Sebring
Shop for the best-rated brands offering Belts and Hoses and other products for your 2004 Chrysler Sebrings. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2004 Sebring start at just $18.49 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2004 Chrysler Sebring Belts and Hoses
When it comes to maintaining or upgrading your 2004 Chrysler Sebring, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2004 Chrysler Sebring. With over 2 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $23.99, with an average price of just $46.99. Plus, with over 8 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$69.99
(6)
Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999683A
“AAAAAAAAAAAAAAAAAAAAAA{++++++++++++++”
from
$23.99
(2)
Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 90mm Diameter, 900053A
“Great”
Popular Dayco 2004 Chrysler Sebring Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2004 Chrysler Sebring owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2004 Sebring, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Dayco Belts and Hoses range from $25.99 to $41.99, plus, with more than 19 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$25.99
(8)
Dayco Flex Radiator Hoses EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia., 81051
“Exact fit for ’97 Acura CL 2.2.”
from
$41.99
(9)
Dayco Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 5060560
“This is replacement part that is looks durable and was a perfect fit”
FAQs for 2004 Chrysler Sebring Belts and Hoses
Which Belts and Hoses are best-sellers for 2004 Chrysler Sebrings?
Out of 79 Belts and Hoses that fit 2004 Chrysler Sebrings, the following parts are the top sellers:
- Idler Pulley, Dayco, 89097 (20130179) – $32.99
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length, 80400 (5197066) – $31.99
- Dayco Poly Rib Belt Serpentine Belt 48.5 Long, 6 Rib Count, 5060485 (19270561) – $61.99
What’s the price range for 2004 Chrysler Sebring Belts and Hoses?
Belts and Hose prices for the 2004 Chrysler Sebring start at $8.35 and go up to $184.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2004 Chrysler Sebring?
The average price for Belts and Hoses for the 2004 Chrysler Sebring is $39.22. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Chrysler Sebring model years?
What are the cheapest Belts and Hoses for my 2004 Chrysler Sebring?
The cheapest 2004 Chrysler Sebring Belts and Hoses we carry in stock are:
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length, 87817 (15590145) – $11.79
- "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 22"" Long, 1.31"" Diameter, E71189" (5190789) – $14.49
- Dorman Idler Pulley (Pulley only), 419-602 (10041701) – $14.99
- V-Ribbed Belt, Driveworks, 375K5 (3350021) – $16.79
- Driveworks Poly Rib Belt Serpentine Belt 35.5 Long, 4 Rib Count, 355K4 (5061598) – $16.99
What are the top-rated Belts and Hoses that fit the 2004 Chrysler Sebring?
Out of 3,283 reviews by customers, our 2004 Chrysler Sebring Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2004 Chrysler Sebring and their top-rated products:
- Serpentine and V Belts
- Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (99984557) – $23.49
- Dayco Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 5060560 (3290118) – $41.99
- Driveworks Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 560K6 (5065100) – $32.99
- Radiator Hoses
- Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (99984557) – $23.49
- Dayco Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 5060560 (3290118) – $41.99
- Driveworks Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 560K6 (5065100) – $32.99
- Belt Tensioners
- Driveworks Poly Rib Belt Serpentine Belt 47.25 Long, 6 Rib Count, 473K6 (99984557) – $23.49
- Dayco Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 5060560 (3290118) – $41.99
- Driveworks Poly Rib Belt Serpentine Belt 56 Long, 6 Rib Count, 560K6 (5065100) – $32.99
What types of Belts and Hoses do you sell for my 2004 Chrysler Sebring?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2004 Chrysler Sebring:
Can I get help with 2004 Chrysler Sebring Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Belts and Hoses and more.
What is your return policy for Chrysler Sebring Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Chrysler Sebring Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
