2000 Chevrolet Impala Transmission Parts
Find Your Specific 2000 Chevrolet Impala Transmission Parts
Below you will find various in-demand Chevrolet Transmission Parts, components and accessories for your 2000 Impala. Advance Auto Parts has popular Impala parts like Automatic Transmission Parts, Automatic Transmission Pan and Gaskets, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Impala model years including
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020 and more. Select a category of 2000 Chevrolet Impala Transmission Parts below and start saving instantly.
Popular 2000 Chevrolet Impala Transmission Parts Categories
Essential Transmission Parts for 2000 Chevrolet Impalas
GM Genuine Parts – Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve (Part No.24227747)
from
$51.99
Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8690)
from
$27.49
Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBC4935)
from
$48.99
An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Precision-wound coated copper windings increase product durability and life cycle.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8693)
from
$27.49
GM (General Motors) Powerglide Transmission Pan Gasket – Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
B & M – Cast Powerglide Transmission Pan (Part No.70280)
from
$332.99
B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.
Product Features:
See More
Product Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
Dorman – Camshaft Position Sensor (Part No.645-154)
from
$24.99
Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.
Product Features:
See More
Product Features:
- Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
- Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4986)
from
$23.99
An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Precision-wound coated copper windings increase product durability and life cycle.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1322)
from
$28.99
The Automatic Transmission Fluid Temperature Sensor provides an input to the transmission control module as to the operating temperature of the automatic transmission fluid under the many operating conditions. The transmission control module will provide the transmission hydraulic circuits the optimal fluid pressure for current temperature conditions.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)
from
$99.99
This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
- Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
- Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-958)
from
$51.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction – made of quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Multi-Purpose Seal (Part No.7038SA)
from
$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18723)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Carquest Premium – Multi-Use Connector (Part No.PTA1121)
from
$65.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Automatic Transmission Speed Sensor (Part No.SBA3782)
from
$35.99
Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- O-rings or seals are included (where applicable)
- Magnet size and strength optimized for precise signal output.
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
Product Features:
See More
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Imperial – Transmission Line Fitting Kit (Part No.240390)
from
$12.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission line fitting kit
- GM, Jeep; 5/8″-18 inverted flare
- Helps simplify transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
- Crafted from high-quality material that makes it durable and longer-lasting
- A high quality, direct fit OE replacement
- Easily connects the transmission cooler line to the cooler hose
- Coated for extra protection against corrosion
- Crafted from high-quality material that makes it durable and longer-lasting
- A high quality, direct fit OE replacement
- Easily connects the transmission cooler line to the cooler hose
- Coated for extra protection against corrosion
Carquest – A/C Auto Temperature Control Relay (Part No.R3107)
from
$18.99
Product Features:
See More
- Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
- A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
- Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
- The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
Hays – Converter: 700R4 32-3600 Stall (Part No.97-1E32Q)
from
$870.99
Converter: 700R4 32-3600 Stall
National – Multi-Purpose Seal (Part No.240735)
from
$5.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Multi-Use Connector (Part No.PTA1491)
from
$38.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Anchor – Transmission Mount: Front Left, 1 Piece (Part No.3195)
from
$55.99
Anchor 3195 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2020
- Weight approx: 2 Lbs
ATP – Vehicle Speed Sensor (Part No.CE-11)
from
$82.99
Vehicle Speed Sensor
Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280447)
from
$2411.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
GM Genuine Parts – Gray Multi-Purpose Pigtail (Part No.PT1798)
from
$62.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ATP – MT SHIFT CABLE (Part No.Y-1297)
from
$82.99
MT SHIFT CABLE
Carquest – Multi-Purpose Relay (Part No.83A1008)
from
$18.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)
from
$65.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Upgrade your 2000 Chevrolet Impala with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 2000 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Transmission Parts for the 2000 Chevrolet Impala, designed to meet your needs without breaking the bank.
From
Automatic Transmission Part
replacements to
Automatic Transmission Pan and Gaskets
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2000 Chevrolet Impala at great prices.
Our Transmission Parts inventory for this model
ranges from just $1.99 to $2,361.00, with
an average price of $152.77.
Our 74 Transmission Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet Impala without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet Impala, we stock popular OEM and aftermarket Transmission Parts from top names
like National, Dorman, Imperial, and more.
National Transmission Parts
start at just $4.99 and boast an impressive 4.3 stars average rating from customers.
Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $7.99, and at an average 4.2 stars rating.
With 798 customer reviews and counting, our 2000 Chevrolet Impala Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place.
Start shopping confidently below for your 2000 Chevrolet Impala!
Best-Selling Automatic Transmission Parts for 2000 Chevrolet Impalas
Enhance the driving experience in your Chevrolet with 13 quality Automatic Transmission Part components, starting at $23.99.
ATP – Shift Solenoid (Part No.JE-54)
from
$46.99
Shift Solenoid
Dorman – Transmission Shift Interlock Solenoid (Part No.924-975)
from
$99.99
This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles
- Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
- Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – ATHARNESS VSS REPR (Part No.JE-24)
from
$127.99
ATHARNESS VSS REPR
Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4723A-FL)
from
$2361.00
Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).
Product Features:
See More
Product Features:
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4725A-FD)
from
$2353.00
Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).
Product Features:
See More
Product Features:
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
- Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
Spartan – Automatic Transmission Assembly; GM FWD 4T65E 4-Speed (Part No.4721A-FL)
from
$2220.00
Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).
Product Features:
See More
Product Features:
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
- Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280403)
from
$1914.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280424)
from
$1914.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 4T65E Automatic Transmission Assembly (Part No.T280415)
from
$1914.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
ATP – ATHARNESS VSS REPR (Part No.JE-31)
from
$195.99
ATHARNESS VSS REPR
GM Genuine Parts – Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve (Part No.24227747)
from
$51.99
Automatic Transmission Torque Converter Clutch Pulse Width Modulation Valve
Pro-King – Automatic Transmission Solenoid (Part No.52-0216)
from
$28.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4986)
from
$23.99
An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Precision-wound coated copper windings increase product durability and life cycle.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
Most Popular 2000 Chevrolet Impala Automatic Transmission Pan and Gaskets
Customize your Chevrolet with 5 Automatic Transmission Pan and Gaskets products
like Transmission Oil Pan Gaskets,
Transmission Pan Gaskets, and
Transmission Oil Pans, all
priced under $67.99.
Felpro – Transmission Oil Pan Gasket: 20 Bolt Hole, One Piece Gasket (Part No.TOS 18717)
from
$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18723)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-814)
from
$67.99
On certain GM vehicles, when an original equipment transmission pan is Leaking in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the performance of the original equipment pan but features a convenient drain plug to allow the transmission fluid to be removed before service. This steel pan is also upgraded with an E-coat finish for excellent resistance to corrosion, and includes a filter assembly, gasket and integrated magnet for a complete repair solution.
Product Features:
See More
Product Features:
- Service-friendly – this transmission fluid pan for specified vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
- Durable design – with an E- coat finish and constructed to strict specifications, this upgraded pan is engineered to withstand corrosion, impacts and leaks for a long and reliable service life
- Complete solution – includes pan with integrated magnet, filter assembly and gasket for a hassle-free, professional repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
ATP – AT OIL PAN GASKET (Part No.JG-108)
from
$11.79
AT OIL PAN GASKET
ATP – REUSABLE AT PAN GSKT (Part No.JG-143)
from
$42.49
REUSABLE AT PAN GSKT
Top Picks for 2000 Chevrolet Impala Transmission Cooler and Parts
Upgrade Chevrolet Impalas with top-quality Transmission Cooler and Parts parts, including 13 OEM and aftermarket selections for your 2000 model.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)
from
$61.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)
from
$55.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)
from
$40.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)
from
$80.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)
from
$52.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$79.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- Up to Class C motorhomes, towing up to 5,000 pounds
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-951)
from
$41.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction – made of quality materials for reliable performance and Length service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-152)
from
$28.49
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction – made of quality materials for reliable performance and Length service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$60.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
In-Demand Transmission Seals for 2000 Chevrolet Impalas
Select from 4 premium Transmission Seals parts for your 2000 Chevrolet Impala, with prices ranging from $6.99 to $14.29.
National – Multi-Purpose Seal (Part No.3543)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
- Good dry heat resistance
- Excellent low temperature capability
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
Product Features:
See More
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Automatic Transmission Output Shaft Seal (Part No.100165)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Schaeffler – Shaft Seal (Part No.SS2421)
from
$14.29
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Most Sold 2000 Chevrolet Impala Transmission Mounts
Explore our best-selling Chevrolet parts for the 2000 Impala among 5 OEM and aftermarket options starting from $29.99.
Anchor – Transmission Mount: Left, 1 Piece (Part No.2818)
from
$29.99
Anchor 2818 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1997-2011
- Weight approx: 2 Lbs
- Solid Rubber
Anchor – Transmission Mount: Left, Rear, 1 Piece (Part No.2712)
from
$46.99
Anchor 2712 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1991-2011
- Weight approx: 3 Lbs
- Hydraulic
Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Red (Part No.71223030HKR)
from
$53.99
Product Features:
See More
- Durable polyurethane to handle the stress of high horsepower
- Same durometer as other BlackHeart and Hooker poly mounts
- Can be used in place of 1-bolt or 2-bolt mount
- Absorbs vibration and last longer than rubber
- Ideal for use on street or strip applications
- Molded indentions for socket clearance to ease installation
- Complete with Grade 8 mounting hardware
- Bolt Spacing on the Wider Side: 4-inch
- Bolt Spacing on the Narrow Side: 1.5-inch
Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)
from
$48.99
Product Features:
See More
- Durable polyurethane to handle the stress of high horsepower
- Same durometer as other BlackHeart and Hooker poly mounts
- Can be used in place of 1-bolt or 2-bolt mount
- Absorbs vibration and last longer than rubber
- Ideal for use on street or strip applications
- Molded indentions for socket clearance to ease installation
- Complete with Grade 8 mounting hardware
- Bolt Spacing on the Wider Side: 4-inch
- Bolt Spacing on the Narrow Side: 1.5-inch
International Suspension Group – Transmission Mount (Part No.J600091563ISG)
from
$32.59
International Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:
See More
Product Features:
- High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
- Rubber: high quality NVH rubber which is same used in OE applications
- All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
- ISO/TS16949 manufacturer for OE contracts
- All included hardware made of hardened steel with superior bolts
- Hydro-Electric mounts have the same number of components as OE, where applicable
- Electrical connectors are fully functional
Top-Rated Transmission Parts Brands For Your 2000 Chevrolet Impala
Shop for the best-rated brands offering Transmission Parts and other products for your 2000 Chevrolet Impalas. Below you’ll find some of our best rated Transmission Parts from National, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2000 Impala start at just $4.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 2000 Chevrolet Impala Transmission Parts
When it comes to maintaining or upgrading your 2000 Chevrolet Impala, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2000 Chevrolet Impala. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $7.32. Plus, with over 37 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$6.99
(20)
Multi Purpose Seal
“Would have been fine most likely – if correct seal was in the box. For redoing a Front Crank Seal on a 4 cylinder 89 Ranger.”
Popular Dorman 2000 Chevrolet Impala Transmission Parts
Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2000 Chevrolet Impala owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2000 Impala, Advance Auto Parts carries a full inventory of 3 Dorman Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Transmission Parts range from $7.99 to $17.99, plus, with more than 22 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
from
$8.99
(5)
Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread
“Put on my 2004 silverado”
from
$7.99
(16)
Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread
“Great product with great value”
from
$17.99
(1)
Transmission Fitting
“good line description, good price, delivered on time, as described and in perfect condition, exact fit, worked the first time.”
FAQs for 2000 Chevrolet Impala Transmission Parts
Which Transmission Parts are best-sellers for 2000 Chevrolet Impalas?
Out of 74 Transmission Parts that fit 2000 Chevrolet Impalas, the following parts are the top sellers:
- Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread (9110043) – $7.99
- Econo-Kool Transmission Oil Cooler (6014720) – $40.99
- Multi-Purpose Seal (18443030) – $9.99
What’s the price range for 2000 Chevrolet Impala Transmission Parts?
Transmission Part prices for the 2000 Chevrolet Impala start at $1.99 and go up to $2,361.00 for the most premium parts.
What’s the average price of a Transmission Part for a 2000 Chevrolet Impala?
The average price for Transmission Parts for the 2000 Chevrolet Impala is $152.77. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Chevrolet Impala model years?
What are the cheapest Transmission Parts for my 2000 Chevrolet Impala?
The cheapest 2000 Chevrolet Impala Transmission Parts we carry in stock are:
- Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
- Multi-Purpose Seal (20441085) – $4.99
- Multi Purpose Seal (3271471) – $6.99
- Transmission Line Connector with 3/8 Tube X 5/8-18 In. Thread (9110043) – $7.99
- Oil Seal (5442583) – $8.49
What are the top-rated Transmission Parts that fit the 2000 Chevrolet Impala?
Out of 798 reviews by customers, our 2000 Chevrolet Impala Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2000 Chevrolet Impala and their top-rated products:
- Transmission Connectors
- Transmission Fitting (10974943) – $17.99
- Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
- Transmission Fitting Kit (20230015) – $27.49
- Back Up Neutral Safety Parts
- Transmission Fitting (10974943) – $17.99
- Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
- Transmission Fitting Kit (20230015) – $27.49
- Automatic Transmission Pan and Gaskets
- Transmission Fitting (10974943) – $17.99
- Transmission Line Connector – 3/8 in OD Tube x 9/16-18 UNF Thread (10916185) – $8.99
- Transmission Fitting Kit (20230015) – $27.49
What types of Transmission Parts do you sell for my 2000 Chevrolet Impala?
As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2000 Chevrolet Impala:
Can I get help with 2000 Chevrolet Impala Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.
What is your return policy for Chevrolet Impala Transmission Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Impala Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
