2000 Chevrolet Express 2500 Drivetrains
More 2000 Chevrolet Express 2500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2000 Chevrolet Express 2500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2000 Chevrolet Express 2500 Drivetrains
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Clutch Release Bearing (Part No.S-B-2010)
Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)
from
$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Dorman – Differential Pinion Yoke Assembly (Part No.697-545)
from
$313.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)
from
$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 10.5″ 14 bolt truck with Eaton positraction
- Carbon fiber clutches
Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)
from
$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More
Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)
Neapco – Universal Joint (Part No.2-0053)
Yukon Gear – Cross Pin Bolt (Part No.33067)
from
$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.
Product Features:
See More
Product Features:
- Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Washer – I.D. 20.1mm O.D. 44.0mm Thickness 2.6mm (sold by each) (Part No.618-032)
from
$2.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Richmond Gear – Differential Spool (Part No.81-1028-1)
from
$259.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Differential Cover B (Part No.33569)
from
$5.99
Differential Cover B
Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)
from
$729.99
Product Features:
See More
- Standard open carrier case
- Fits GM 10.5″ 14 bolt truck
- 4.10 and down ratio only
- Does not include spider gears
Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)
Yukon Gear – GM 9.5" Rear Axle Bearing And Seal Kit (Part No.10003)
from
$109.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit for semi-floating GM 9.5″, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits GM applications
- Includes axle bearing and seal
- Services one side
- 2.985″ O.D.
- 1.700″ I.D.
National – Multi Purpose Bearing (Part No.HB-108-D)
from
$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)
from
$24.99
Product Features:
See More
- Fits GM 8.6″ and 9.5″
- Sleeve to adapt standard yoke to use late model triple lip pinion seal
Yukon Gear – AxleHubBolt (Part No.33583)
from
$5.99
AxleHubBolt
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Yukon Gear – Master Overhaul Kit For Dana 60 And 61 Rear Differential (Part No.14037)
from
$414.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)
from
$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.
Product Features:
See More
Product Features:
- Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
- 7/8″ x 14 thread
- 1 5/16″ socket
Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)
from
$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Richmond Gear – RngPnn (Part No.49-0041-1)
from
$342.99
RngPnn
Yukon Gear – GM 9.76" & ’14 & Up GM 9.5" 12 Bolt Cover Gasket (Part No.23029)
from
$54.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Chrysler 8.25″ open differntial with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 60 (Part No.17019)
from
$52.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 60
- Works with Spartan Locker or standard open spider gears
Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)
from
$32.99
Standard open and Gov-Loc cross pin for 9.5″ GM.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 9.5″
Popular 2000 Chevrolet Express 2500 Drivetrains Categories
2000 Chevrolet Express 2500 Drivetrains
You count on your 2000 Chevrolet Express 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 229 Drivetrains ranging in price from $2.49 to $1,374.99, you’re sure to find everything you need for your 2000 Chevrolet Express 2500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and National. 2000 Chevrolet Express 2500 Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 8,063 extensive product reviews on 2000 Chevrolet Express 2500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2000 Chevrolet Express 2500 below to get started!
Top-Rated Drivetrains Brands For Your 2000 Chevrolet Express 2500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Chevrolet Express 2500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2000 Chevrolet Express 2500 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2000 Chevrolet Express 2500 Drivetrains
What are the most purchased Drivetrains for the 2000 Chevrolet Express 2500?
Out of 229 Drivetrains for the 2000 Chevrolet Express 2500, the most popular in our inventory are:
What are the top-rated 2000 Chevrolet Express 2500 Drivetrains?
Top-rated Drivetrains for your 2000 Chevrolet Express 2500 based on customer reviews/ratings are:
