2000 Chevrolet Express 1500 Suspension Parts

Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 2000 Express 1500. Advance Auto Parts has popular Express 1500 parts like Shocks and Struts, Suspension Hardwares, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other Express 1500 model years including 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 and more. Select a category of 2000 Chevrolet Express 1500 Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 Chevrolet Express 1500 Suspension Parts Categories

Suspension Tools

Shock Absorber and Coil Spring Assemblies

Leaf Spring Shackles

Rear Shock and Struts

Front Shock and Struts

Leaf Spring Hangers

Active Suspension Relays

Leaf Spring Bumpers

Shock Boots, Levelers, and Accessories

Helper Springs

Lower Control Arm Bushings

Strut Bellows

Leaf Spring Bushings

Coil Spring Insulators

Shackle Bushings

Leaf Spring Insulators

Air Suspension Sensor Connectors

Essential Suspension Parts for 2000 Chevrolet Express 1500s

from

$26.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$304.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$39.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$31.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$82.99

This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$106.99

Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$100.99

Ideal for vehicles with a higher center of gravity, Monroe Reflex light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$107.99

COMPLETESTRUTASSMBLY

from

$231.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$92.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$83.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$25.99

A critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on rubber bushings. Nolathane’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD¿s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:

Kit Contains: 4 bushings, 2 Tubes

from

$64.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$43.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$13.99

This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
Excellent value – original equipment quality at a lower price
Ready to install – all essential hardware is included for an easy installation

from

$64.99

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$165.99

This suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings without damaging other components.

Product Features:

Handy solution – this suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$53.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$23.29

This leaf spring bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$29.99

Easy to install
Restores like-new steering handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design features

from

$14.99

This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
Restores functionality – this spacer is made to fully restore part functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

Upgrade your 2000 Chevrolet Express 1500 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2000 Chevrolet Express 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Express 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Suspension Parts for the 2000 Chevrolet Express 1500, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Suspension Hardware upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2000 Chevrolet Express 1500 at great prices. Our Suspension Parts inventory for this model ranges from just $13.99 to $304.99, with an average price of $67.93. Our 40 Suspension Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet Express 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet Express 1500, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Dorman, and more. Moog Suspension Parts start at just $31.49 and boast an impressive 4.5 stars average rating from customers. Monroe and Dorman also bring quality to the table, with Suspension Parts available starting at $13.99, and at an average 4.4 stars rating. With 1,086 customer reviews and counting, our 2000 Chevrolet Express 1500 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chevrolet Express 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 1500 in top shape, all in one place. Start shopping confidently below for your 2000 Chevrolet Express 1500!

Best-Selling Shocks and Struts for 2000 Chevrolet Express 1500s

Enhance the driving experience in your Chevrolet with 14 quality Shocks and Strut components, starting at $24.99.

show more show less

from

$31.49

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$92.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$45.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$60.99

Monroe Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$100.99

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$39.49

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$83.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$100.99

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$106.99

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$100.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$103.99

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

Adds Up To 25% More Damping Performance Over Original Equipment Shocks
Components And Valving Designed Specifically For Gm Trucks
Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

from

$304.99

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

Most Popular 2000 Chevrolet Express 1500 Suspension Hardwares

Customize your Chevrolet with 1 Suspension Hardware products like Suspension Tools, all priced under $165.99.

show more show less

from

$165.99

This suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings without damaging other components.

Product Features:

Handy solution – this suspension control arm bushing tool is precision-engineered to help easily remove suspension bushings
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top Picks for 2000 Chevrolet Express 1500 Coil and Leaf Springs

Upgrade Chevrolet Express 1500s with top-quality Coil and Leaf Springs parts, including 13 OEM and aftermarket selections for your 2000 model.

show more show less

from

$13.99

This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
Excellent value – original equipment quality at a lower price
Ready to install – all essential hardware is included for an easy installation

from

$19.79

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$231.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$14.99

Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
Restores functionality – this spacer is made to fully restore part functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$23.29

This leaf spring bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$82.99

Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$107.99

COMPLETESTRUTASSMBLY

from

$97.99

COMPLETESTRUTASSMBLY

from

$39.99

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$29.99

Easy to install
Restores like-new steering handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design features

from

$25.99

Kit Contains: 4 bushings, 2 Tubes

In-Demand Control Arms for 2000 Chevrolet Express 1500s

Select from 7 premium Control Arms parts for your 2000 Chevrolet Express 1500, with prices ranging from $13.99 to $149.99.

show more show less

from

$13.99

Control Arm Bushing

from

$40.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$33.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$149.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$64.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$24.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$16.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Sold 2000 Chevrolet Express 1500 Air Suspension and Kits

Explore our best-selling Chevrolet parts for the 2000 Express 1500 among 5 OEM and aftermarket options starting from $23.99.

show more show less

from

$26.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$32.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$54.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Top-Rated Suspension Parts Brands For Your 2000 Chevrolet Express 1500

Shop for the best-rated brands offering Suspension Parts and other products for your 2000 Chevrolet Express 1500s. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Dorman, and more. Suspension Parts from these brands that fit a 2000 Express 1500 start at just $13.99 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2000 Chevrolet Express 1500 Suspension Parts

When it comes to maintaining or upgrading your 2000 Chevrolet Express 1500, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 2000 Chevrolet Express 1500. With over 3 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $35.49. Plus, with over 9 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $33.99

(3)

Suspension Control Arm Bushing Kit

“Excellent fit for my 01 express van, had to buy a new tool to remove and install them, but it was worth it”

from $40.99

(5)

Suspension Control Arm Bushing Kit

“Yes”

from $31.49

(1)

Leaf Spring Shackle Bushing

“Exact fit, good buy”

Popular Monroe 2000 Chevrolet Express 1500 Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2000 Chevrolet Express 1500 owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2000 Express 1500, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $45.99 to $92.99, plus, with more than 74 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $45.99

(34)

Gas-Matic LT Suspension Shock Absorber

“Replaced the shocks in my 88 c1500 , much better now”

from $60.99

(39)

Gas-Matic Suspension Shock Absorber

“Easy to install.”

from $92.99

(1)

OESpectrum Suspension Shock Absorber

“Good shocks”

FAQs for 2000 Chevrolet Express 1500 Suspension Parts

Which Suspension Parts are best-sellers for 2000 Chevrolet Express 1500s?

Out of 40 Suspension Parts that fit 2000 Chevrolet Express 1500s, the following parts are the top sellers:

Position Leaf Spring Shackle Kit (20519984) – $39.99
Multi-Purpose Relay (12460010) – $26.99
Gas-Matic LT Suspension Shock Absorber (15900064) – $39.49

What’s the price range for 2000 Chevrolet Express 1500 Suspension Parts?

Suspension Part prices for the 2000 Chevrolet Express 1500 start at $13.99 and go up to $304.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2000 Chevrolet Express 1500?

The average price for Suspension Parts for the 2000 Chevrolet Express 1500 is $67.93. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Express 1500 model years?

Yes, we currently carry Suspension Parts for 17 model years of Chevrolet Express 1500s between 1996 and 2014. Suspension Parts are bought most frequently for the following model years: 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, and 2006.

What are the cheapest Suspension Parts for my 2000 Chevrolet Express 1500?

The cheapest 2000 Chevrolet Express 1500 Suspension Parts we carry in stock are:

Control Arm Bushing (10577166) – $13.99
Leaf Spring Inserts (17191223) – $13.99
Leaf Spring Insert (10420926) – $14.99
Suspension Control Arm Bushing Kit (50212020) – $16.99
Coil Spring Insulator (21880686) – $19.79

What are the top-rated Suspension Parts that fit the 2000 Chevrolet Express 1500?

Out of 1,086 reviews by customers, our 2000 Chevrolet Express 1500 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2000 Chevrolet Express 1500 and their top-rated products:

Control Arms
- Suspension Control Arm Bushing Kit (20516603) – $33.99
- Control Arm Bushing (10577166) – $13.99
- Suspension Control Arm Bushing Kit (20973755) – $40.99
Coil and Leaf Springs
- Suspension Control Arm Bushing Kit (20516603) – $33.99
- Control Arm Bushing (10577166) – $13.99
- Suspension Control Arm Bushing Kit (20973755) – $40.99
Shocks and Struts
- Suspension Control Arm Bushing Kit (20516603) – $33.99
- Control Arm Bushing (10577166) – $13.99
- Suspension Control Arm Bushing Kit (20973755) – $40.99

What types of Suspension Parts do you sell for my 2000 Chevrolet Express 1500?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2000 Chevrolet Express 1500:

Can I get help with 2000 Chevrolet Express 1500 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Express 1500 Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Express 1500 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Chevrolet Express 1500 Suspension Parts

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Timbren SES – Rubber Spring, Frame Mount, 14000 Lb Weight Capacity Per Set, Aeon Hollow Rubber (Part No.GMFK15A)

Rare Parts – Coil Spring Insulator (Part No.RP46346)

MOOG – Leaf Spring Shackle Bushing (Part No.K200897)

Dorman – Position Leaf Spring Bracket Kit (Part No.722-087)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34983)

Monroe – Reflex Suspension Shock Absorber (Part No.911050)

PRT – COMPLETESTRUTASSMBLY (Part No.920925)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58606)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37085)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34762)

Nolathane – Leaf Spring – Rear Eye Bushing (Part No.REV164.0052)

Rare Parts – Control Arm Bushing (Part No.RP17010)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6688)

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Dorman – Position Leaf Spring Shackle Kit (Part No.722-006)

MOOG – Leaf Spring Shackle (Part No.K150404)

Dorman – Control Arm Bushing Tool (Part No.546-900)

Carquest Premium – Repair Harness (Part No.PTA1176)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

Dorman – Position Leaf Spring Bumper (Part No.523-065)

MOOG – Leaf Spring Bumper (Part No.K202028)

Dorman – Leaf Spring Insert (Part No.924-070)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

MOOG – Leaf Spring Shackle Bushing (Part No.K200897)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37085)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59581)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59028)

Monroe – Reflex Suspension Shock Absorber (Part No.911050)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59518)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34762)

Monroe – Reflex Suspension Shock Absorber (Part No.911085)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34983)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37050)

KYB – High Pressure Monotube Gas Shock (Part No.KG5478)

Timbren SES – Rubber Spring, Frame Mount, 6,000 Pound Weight Capacity Per Set (Part No.GMRG25C)

Dorman – Control Arm Bushing Tool (Part No.546-900)

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Dorman – Position Leaf Spring Shackle Kit (Part No.722-006)

MOOG – Coil Spring Insulator (Part No.K160045)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58606)

Dorman – Leaf Spring Insert (Part No.924-070)

MOOG – Leaf Spring Shackle (Part No.K150404)

Dorman – Position Leaf Spring Bumper (Part No.523-065)

Dorman – Position Leaf Spring Bracket Kit (Part No.722-087)

PRT – COMPLETESTRUTASSMBLY (Part No.920925)

Carquest Premium – COMPLETESTRUTASSMBLY (Part No.28-920925)

Rare Parts – Coil Spring Insulator (Part No.RP46346)

MOOG – Leaf Spring Bumper (Part No.K202028)

Nolathane – Leaf Spring – Rear Eye Bushing (Part No.REV164.0052)

Driveworks – Control Arm Bushing (Part No.DW-K6395B)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6395)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6327)

Rare Parts – Control Arm Bushing (Part No.RP17071)

Rare Parts – Control Arm Bushing (Part No.RP17010)

Rare Parts – Control Arm Bushing (Part No.RP22205)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-451)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)