2000 Chevrolet Corvette Performance and Racing Products

Name: Transpak For 65-87 TH400 Transmission
Brand: B & M
SKU: 20228
Price: 166.99 USD

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2000 Corvette. Advance Auto Parts has popular Corvette parts like Performance Engines, Performance Ignition Products, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Corvette model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2000 Chevrolet Corvette Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2000 Chevrolet Corvette Performance and Racing Products Categories

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Exhaust Headers

Performance Shifters

Performance Exhaust System Kits

Performance Engine Water Pumps

Performance Engine Camshaft and Lifter Kits

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Nitrous Oxide Plate

Performance Engine Valvetrain Kit

Essential Performance and Racing Products for 2000 Chevrolet Corvettes

from

$166.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$399.99

The Max Energy Spectrum Power Programmer delivers more power-per-dollar than any other bolt-on on the market today. Plus, it installs in less than 15 minutes without using tools or getting your hands dirty. Our award-winning Power Tuning adds maximum horsepower, torque, and performance for any kind of driving for vehicles using regular, premium, E85, as well as diesel fuel. The Max Energy Spectrum also has a larger backlit LCD screen for quick and easy setup and user-friendly navigation for simple installation, tuning, and feature options.

Product Features:

Optimized engine tuning
Adjustable rev limiter/speed limiter
Speedometer correction for multiple tire sizes and gear ration changes
Adjustable shift firmness and shift points
Throttle adjustments
Cooling fan on/off temperatures
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable

from

$421.99

Assure a steady, precise metered flow of nitrous and fuel for reliability. Backed with years of laboratory research, as well as dyno and drag strip testing. NOS Injector Plates are available for those who want to build their own system or upgrade their current nitrous system without having to go through the expense of a new complete system. Unless specified, NOS Injector plates incorporate a low profile 1/2 inch thick design and are constructed of solid billet or die cast aluminum with a durable black finish. Included are all applicable gaskets, studs, jets and plumbing.

Product Features:

Convert Existing Nitrous Kit To New Technology

from

$165.99

Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.

Product Features:

3/8″ Diameter, 7.800″ Length
Magnum Pushrods for Small Block Chevy
One-piece .080″ wall chromemoly steel tubing
Heat-treated for extended durability and guide plate compatibility
Precision formed and reinforced pushrod end

from

$10.99

10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring

from

$663.99

For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:

For 3500 to 7500 RPM
Use Where Low-End Torque is Not a Prime Factor
Great For Engines w/Slightly Modified Heads
Top Has Vacuum Outlet for Power Brakes
Will Accept Forward and Sideways Mounted Carbs
Carburetor Center-to-Center Dimensions 8.875 in
HEI Ignition Will Not Clear Manifold
For Street Mach.; Street Rods; Pro-Street; Marine

from

$1350.99

Super Competition Sidemount Headers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova or Firebird. Sidemount Headers are built from lightweight 18 gauge tubing. Sidetubes slip directly to the collector for a leak free seal. Hooker sidemount Headers and sidetubes come with 3 choices of coating; show quality chrome, high heat resistant black paint and Hooker’s metallic ceramic thermal barrier coating. Replaceable Hooker Mufflers are available separately in 2 different styles; glasspack and reverse flow. The glass pack style provides the highest performance with minimal backpressure and sound control. The reverse flow is designed for maximum sound control.

Product Features:

Most Aggressive Style/Performance
Lightweight 18 Gauge Tubing
Leak Free Seal
Replacement Hooker Mufflers Available

from

$436.99

RngPnn

from

$50.99

Edelbrock part #7215 Intake Gaskets for 1958-1986 E-Tec 200 Small-Block Chevy allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-2N Microp

Product Features:

1.26″x2.24″
E-Tec Port Style
.120″ Thick
Two Piece Configuration
Composite Material

from

$173.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f

from

$20.49

Header Gasket Set

from

$108.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$719.99

COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.

Product Features:

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
Use Dual Valve Spring part No. 26925-16 with this camshaft

from

$49.99

With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:

Advance the cam for increased torque and horsepower
Tune your powerband for more end torque or increase top end horsepower
Includes (4) offset bushings and (1) 0 degree bushing
Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
Increase Top-End Horsepower

from

$562.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply

from

$75.99

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$551.99

Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
6.00 in. Block To Hub Height
Natural Finish

from

$483.99

The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H

Product Features:

All One-Handed
Reverse Lockout Meets NHRA And IHRA Requirements
Mount Directly To Floor/Chassis/Or w/Quick Release
Ultimate For Powerglide Applications
Lightweight Brushed Alum. Cover
Cover Removed Quickly and Easily
Includes 5 Ft. Super Duty Race Cable
Quick Change Plate Design

from

$914.99

SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:

Cam and lifter kit for Small Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Thumpr : High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
279/297 Advertised Duration, 227/241 Duration @ .050″, .479″/.465″ Lift, 107 Lobe Separation
Valve spring upgrade required

from

$562.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

8 in. Diameter
Absolutely the most accurate way to trigger the ignition.
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.

from

$62.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Graphite supression eliminates RFI/EMI
3,000 to 7,000 ohms per foot of resistance
Silicone Spark Plug Boots
450 Degree Temperature Rating

from

$33.49

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.49

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$81.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$129.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

Upgrade your 2000 Chevrolet Corvette with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 80 Performance and Racing Products for the 2000 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2000 Chevrolet Corvette at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,870.00, with an average price of $378.61. Our 80 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 2000 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2000 Chevrolet Corvette, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, MSD Ignition, B & M, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $94.99, and at an average 4.2 stars rating. With 114 customer reviews and counting, our 2000 Chevrolet Corvette Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2000 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 2000 Chevrolet Corvette!

Best-Selling Performance Engines for 2000 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 39 quality Performance Engine components, starting at $8.99.

show more show less

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26918-16 with this camshaft

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$51.99

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Die-cut for an excellent fit
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use

from

$37.99

Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:

Opens sooner than stock at 160 degrees
High flow design for performance applications
Includes rubber o-ring seal/gasket
Incorporates pressure relief valve

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
Use Dual Valve Spring part No. 26925-16 with this camshaft

from

$85.99

This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

Product Features:

7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
O.D. – 1.030″, Step 1 – .640″
Precision machined from 4140 chromemoly steel and finished in black oxide
Designed for positive location when combined with COMP Cams high-quality valve springs

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1870.00

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1867.00

XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$868.99

ENGINE VALVE LIFTER

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$719.99

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

from

$645.99

Product Features:

The Holley GM LS1/LS2/LS6 2x4V dual-plane was designed in the tradition of the great dual Holley 4160 induction systems that competed on drag strips, in Trans-Am and at Lemans in the 1960’s.
The dual-plane equal-distribution layout produces great mid-range torque without compromising top end power.
Carbureted and EFI versions available
Power band from 1500-7000 rpm
Appropriate for any street/performance, muscle car, or street rod enthusiast
Cast aluminum construction
Intended for use on all GM LS Gen III engines equipped with LS1/LS2 style cathedral port cylinder heads
Carb Flange Center-To-Center: 8-5/8″

from

$551.99

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
6.00 in. Block To Hub Height
Natural Finish

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Product Features:

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26915-16 with this camshaft

7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs

from

$506.99

7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs

from

$483.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$339.99

CYL HEAD COMPONENTS

Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$286.99

Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set

Most Popular 2000 Chevrolet Corvette Performance Ignition Products

Customize your Chevrolet with 7 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Parts, all priced under $323.99.

show more show less

from

$94.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically Wound Conductor
Suppresses Electro And Radio Noise
Great Strength And Durability
Heavy Duty Terminals For Secure Connection
8mm Silicone/Synthetic Jacket Resists Heat
Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$323.99

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$204.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$152.99

These harnesses allow you to easily connect the 6LS or 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. Connects to the factory crank trigger and other sensors. Programmable via a PC through MSD’s Pro-Data software.

Product Features:

Adapt the MSD Timing and RPM Controller PN[6010] to an EFI system
Manage the ignition timing and program rpm limits.
Connects to the factory crank trigger and other sensors.
Programmable via a PC through MSDs Pro-Data+ software

from

$107.99

MSD Ignition multiple spark coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high RPM performance! The MSC delivers up to three times the current of the stock coils. Plus, the coils fire multiple times!

Product Features:

Produces multiple; powerful sparks
Two connectors molded into custom housing
Improved performance
Produces three times the spark current of stock
Complete kit with mounting hardware
Easy installation
CARB approved legal for use in all states
OBD II approved legal for use in all states

Top Picks for 2000 Chevrolet Corvette Performance Air Filters

Upgrade Chevrolet Corvettes with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 2000 model.

show more show less

from

$83.99

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply

In-Demand Performance Exhaust Products for 2000 Chevrolet Corvettes

Select from 3 premium Performance Exhaust Products parts for your 2000 Chevrolet Corvette, with prices ranging from $35.49 to $1,399.99.

show more show less

from

$1399.99

The MagnaFlow 1997-2004 Chevrolet Corvette Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 5.7L 1997-2004 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16732 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques
Dyno-proven performance

from

$491.99

LS Cast Iron Exhaust Manifold

from

$35.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Most Sold 2000 Chevrolet Corvette Performance Steering Products

Explore our best-selling Chevrolet parts for the 2000 Corvette among 7 OEM and aftermarket options starting from $5.99.

show more show less

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Top-Rated Performance and Racing Products Brands For Your 2000 Chevrolet Corvette

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2000 Chevrolet Corvettes. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 2000 Corvette start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Energy Suspension 2000 Chevrolet Corvette Performance and Racing Products

When it comes to maintaining or upgrading your 2000 Chevrolet Corvette, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 2000 Chevrolet Corvette. With over 1 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99. Plus, with over 3 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

Popular MSD Ignition 2000 Chevrolet Corvette Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2000 Chevrolet Corvette owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 2000 Corvette, Advance Auto Parts carries a full inventory of 1 MSD Ignition Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range up to $94.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $94.99

(1)

Wire Set; Street Fire;GM LS1; LS6

“I wrote some comments on the plugs I bought. I have had a 2002 Corvette Z06 for about 4 months now with 56k miles. I pay attention to corvette forum”

FAQs for 2000 Chevrolet Corvette Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2000 Chevrolet Corvettes?

Out of 80 Performance and Racing Products that fit 2000 Chevrolet Corvettes, the following parts are the top sellers:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99

What’s the price range for 2000 Chevrolet Corvette Performance and Racing Products?

Performance and Racing Product prices for the 2000 Chevrolet Corvette start at $5.99 and go up to $1,870.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2000 Chevrolet Corvette?

The average price for Performance and Racing Products for the 2000 Chevrolet Corvette is $378.61. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Corvette model years?

Yes, we currently carry Performance and Racing Products for 63 model years of Chevrolet Corvettes between 1953 and 2019. Performance and Racing Products are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Performance and Racing Products for my 2000 Chevrolet Corvette?

The cheapest 2000 Chevrolet Corvette Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (50288908) – $8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (50288903) – $8.99

What are the top-rated Performance and Racing Products that fit the 2000 Chevrolet Corvette?

Out of 114 reviews by customers, our 2000 Chevrolet Corvette Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2000 Chevrolet Corvette and their top-rated products:

Performance Air Filters
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (17400188) – $83.99

What types of Performance and Racing Products do you sell for my 2000 Chevrolet Corvette?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2000 Chevrolet Corvette:

Can I get help with 2000 Chevrolet Corvette Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Corvette Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2000 Chevrolet Corvette Performance and Racing Products

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Hypertech – Max Energy Spectrum Power Programmer for California: Adds up to 131HP, Improves Throttle Response (Part No.3050)

NOS/Nitrous Oxide Systems – LS1 Injector Plate (Part No.13434NOS)

Competition Cams – PUSHROD SET, SBC 3/8 1 ST (Part No.7513-16)

Competition Cams – 10 Degree Superlock Steel Retainer for 1.250" OD Valve Spring (Part No.750-1)

Edelbrock – Street Tunnel Ram Small Block Chevy Intake Manifold (Part No.7110)

Hooker Headers – Super Competition Sidemount Header (Part No.2224-3HKR)

Richmond Gear – RngPnn (Part No.49-0052-1)

Edelbrock – Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy (Part No.7215)

Russell – Street Legal, Corvette C5 (Including Z06) (Part No.692190)

Flowtech – Header Gasket Set (Part No.99161FLT)

Energy Suspension – Control Arm Bushing Set (Part No.3.3108G)

Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)

Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

B & M – Tork Master 3000 (Part No.20402)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2111)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)

B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL12-600-4)

MSD Ignition – Crank Trigger Kit; Small Block Chevy; 8? CT Wheel (Part No.8615)

Accel – 8Mm Super Stock Graphite Cust (Part No.4066)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5139G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5193R)

Energy Suspension – Control Arm Bushing Set (Part No.3.3176G)

Energy Suspension – Control Arm Bushing Set (Part No.3.3142R)

Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Mr. Gasket – Intake Gasket (Part No.136G)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)

Competition Cams – Steel Retainers, 1.055" For Ls Beehive 1 St (Part No.774-16)

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)

Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)

Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)

Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)

Holley – LS Carbureted Manifold – 2×4 Dual Plane GM LS1/LS2/LS6 (Part No.300-120)

Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)

Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)

Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)

Competition Cams – 7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs (Part No.772-16)

B & M – Tork Master 2400 (Part No.70418)

Edelbrock – CYL HEAD COMPONENTS (Part No.9708)

Competition Cams – Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7796-16)

MSD Ignition – Wire Set; Street Fire;GM LS1; LS6 (Part No.5572)

Mallory – Unilite Ignition Module (Part No.605)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MSD Ignition – Adapter Cable; MSD PN 6010/PN 60101 to GM OEM Sensors (Part No.8886)

MSD Ignition – Coil, GM LS Series (LS-1, 6) (Part No.8245)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2111)

MagnaFlow – Street Series Axle-Back Performance Exhaust System (Part No.16732)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1438)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5197R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5200R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5196G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5200G)