2000 Audi TT Steering and Chassis Parts
Find Your Specific 2000 Audi TT Steering and Chassis Parts
Below you will find various in-demand Audi Steering and Chassis Parts, components and accessories for your 2000 TT. Advance Auto Parts has popular TT parts like Tie Rods, Alignment Hardwares, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other TT model years including
2001,
2002,
2003,
2004,
2005,
2006,
2008,
2009 and more. Select a category of 2000 Audi TT Steering and Chassis Parts below and start saving instantly.
Popular 2000 Audi TT Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2000 Audi TTs
Rein – Tie Rod End (Part No.SCE0158R)
from
$20.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1061)
from
$69.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Rein – Sway Bar Bushing Kit (Part No.AVB0396R)
from
$8.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0045)
from
$54.99
P/S FLUID RESERVOIR
MOOG – Axle Pivot Bushing (Part No.K200371)
from
$37.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Long-lasting performance
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Sway Bar Link (Part No.RP18961)
from
$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Cardone – Remanufactured Power Steering Pump (Part No.21-5358)
from
$163.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Carquest Premium – Power Steering Return Hose, 16mm Banjo x 3/8" I.D. Molded Hose (Part No.37947)
from
$78.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
MOOG – Alignment Shim (Part No.K90482)
from
$17.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Allows additional adjustment from negative to 1/2 to positive 1/2 Degrees of toe adjustment
Rein – Power Steering Rack Boot (Part No.BKP0049R)
from
$7.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rare Parts – Tie Rod Assembly (Part No.RP28668)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod Assembly (Part No.RP28667)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
National – Bearing Race (Part No.LM29710)
from
$16.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Rare Parts – Ball Joint (Part No.RP12892)
from
$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP11560)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Whiteline – Heavy Duty Front Sway Bar, 22mm (Part No.BAF13)
from
$208.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Sway Bar Kit – Front 24mm & Rear 24mm (Part No.BWK004)
from
$625.99
Engineered to ‘Activate More Grip’, BWK004 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 3 point adjustable front sway bar and 24mm 2 point adjustable rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Dorman – Suspension Control Arm (Part No.526-977)
from
$238.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo (Part No.37752)
from
$171.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Atlantic Automotive Eng – NEW RACK & PINION (Part No.3004N)
from
$578.99
NEW RACK & PINION
Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.312-0120CQ)
from
$451.99
Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
- Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
- Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
- All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE
Upgrade your 2000 Audi TT with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2000 Audi TT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Steering and Chassis Parts are key to keeping your TT functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Steering and Chassis Parts for the 2000 Audi TT, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Alignment Hardware
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2000 Audi TT at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $2.99 to $578.99, with
an average price of $102.49.
Our 40 Steering and Chassis Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2000 Audi TT without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2000 Audi TT is always ready to roll. We’re committed to providing you with everything you need to keep your TT in top shape, all in one place.
Start shopping confidently below for your 2000 Audi TT!
Best-Selling Tie Rods for 2000 Audi TTs
Enhance the driving experience in your Audi with 7 quality Tie Rod components, starting at $20.99.
Rare Parts – Tie Rod Assembly (Part No.RP28668)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod Assembly (Part No.RP28667)
from
$129.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28838)
from
$114.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28840)
from
$114.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28839)
from
$114.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Dorman – Steering Tie Rod End (Part No.532-976)
from
$49.99
This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.
Product Features:
See More
Product Features:
- Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
- Durably designed – factory-sealed and precision-forged housing resists future corrosion
- Reliably engineered – built to decrease wear rate and ensure overall strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Rein – Tie Rod End (Part No.SCE0158R)
from
$20.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Most Popular 2000 Audi TT Alignment Hardwares
Customize your Audi with 1 Alignment Hardware products
like Alignment Shims, all
priced under $17.49.
MOOG – Alignment Shim (Part No.K90482)
from
$17.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Allows additional adjustment from negative to 1/2 to positive 1/2 Degrees of toe adjustment
Top Picks for 2000 Audi TT Sway Bars
Upgrade Audi TTs with top-quality Sway Bars parts, including 10 OEM and aftermarket selections for your 2000 model.
Whiteline – Non-Adjustable Sway Bar – Rear, 24mm (Part No.BWR22XZ)
from
$241.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality steel and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Heavy Duty Front Sway Bar, 22mm (Part No.BAF13)
from
$208.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Front Adjustable Sway Bar Link (Part No.KLC167A)
from
$123.99
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Rare Parts – Sway Bar Link (Part No.RP18961)
from
$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP18960)
from
$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Whiteline – Sway Bar Bushing Service Kit (Part No.KSK084-22)
from
$28.88
Product Features:
See More
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Rein – Sway Bar Link (Part No.SCL0194R)
from
$26.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Rein – Sway Bar Bushing Kit (Part No.AVB0396R)
from
$8.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
Rein – Bushing (Part No.AVB0323R)
from
$3.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
Rein – Bushing (Part No.AVB0321R)
from
$2.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
In-Demand Ball Joints for 2000 Audi TTs
Select from 2 premium Ball Joints parts for your 2000 Audi TT, with prices ranging from $149.99 to $238.99.
Dorman – Suspension Control Arm (Part No.526-977)
from
$238.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP11560)
from
$149.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Most Sold 2000 Audi TT Power Steering Parts
Explore our best-selling Audi parts for the 2000 TT among 19 OEM and aftermarket options starting from $7.99.
Cardone – Power Steering Filter (Part No.20-0058F)
from
$50.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – New Power Steering Filter (Part No.20-0038F)
from
$32.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element.
- Patented built-in bypass that filters up to 190 micron particles.
- Designed to extend the life of the steering system.
- Sure-grip barb connections are included to ensure proper hose fitment.
Cardone – Power Steering Filter (Part No.20-P038F)
from
$35.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
National – Bearing Race (Part No.LM29710)
from
$16.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – Power Steering Return Hose, 16mm Banjo x 3/8" I.D. Molded Hose (Part No.37947)
from
$78.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Cardone – Remanufactured Power Steering Pump (Part No.21-5358)
from
$163.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100 percent tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Atlantic Automotive Eng – NEW RACK & PINION (Part No.3004N)
from
$578.99
NEW RACK & PINION
Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.312-0120CQ)
from
$451.99
Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
- Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
- Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
- All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE
Carquest Premium – Power Steering Pressure Hose, 14mm Banjo x 16mm Banjo (Part No.37752)
from
$171.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Carquest Premium – Remanufactured Power Steering Pump – Hydraulic (Part No.990-0520CQ)
from
$161.99
Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.
Product Features:
See More
Product Features:
- Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
- All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
- All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
- All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE
Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)
from
$91.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
- Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1061)
from
$69.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0045)
from
$54.99
P/S FLUID RESERVOIR
Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)
from
$53.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)
from
$40.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Rein – Power Steering Rack Boot (Part No.BKP0049R)
from
$7.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More
FAQs for 2000 Audi TT Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2000 Audi TTs?
Out of 40 Steering and Chassis Parts that fit 2000 Audi TTs, the following parts are the top sellers:
- Power Steering Filter (10659735) – $35.49
- Axle Pivot Bushing (10413111) – $37.99
- Bearing Race (15050148) – $16.49
What’s the price range for 2000 Audi TT Steering and Chassis Parts?
Steering and Chassis Part prices for the 2000 Audi TT start at $2.99 and go up to $578.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2000 Audi TT?
The average price for Steering and Chassis Parts for the 2000 Audi TT is $102.49. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Audi TT model years?
What are the cheapest Steering and Chassis Parts for my 2000 Audi TT?
The cheapest 2000 Audi TT Steering and Chassis Parts we carry in stock are:
- Bushing (11323311) – $2.99
- Bushing (11323049) – $3.99
- Power Steering Rack Boot (11324846) – $7.99
- Sway Bar Bushing Kit (11403745) – $8.99
- Power Steering Filter (50308546) – $13.99
What types of Steering and Chassis Parts do you sell for my 2000 Audi TT?
As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2000 Audi TT:
Can I get help with 2000 Audi TT Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Steering and Chassis Parts and more.
What is your return policy for Audi TT Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Audi TT Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
