Name: Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
Brand: Walker
SKU: 53052
Price: 199.99 USD
Rating: 3.0 (1 reviews)

from

$199.99

Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:

CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

from

$49.49

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$85.99

Product Features:

Show Quality Chrome Platinum
Durable Black Finish
Can Be Welded Or Clamped
Complete The System
Glass-Packed Resonators

from

$428.99

Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:

EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system

from

$9.72

Exhaust Gasket

from

$8.29

BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
OE-style design for quality fit
Secure sealing for superior durability
Manufactured from quality materials to ensure maximum durability
Reduced vibration

from

$21.49

BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:

Exhaust accessory that enables a complete installation process
Precise fitment
Precise fitment
Manufactured according to strict OE standards
Reduced Vibration

from

$25.49

Complete your exhaust repair with the MEGA clamp. Designed to seal muffler inlets, outlets, elbow joints and pipe, the MEGA clamp is manufactured from durable and robust aluminized steel or T-304 stainless steel for long service life.

Product Features:

KEEPS EXHAUST PARTS IN PLACE — Designed to connect undercar exhaust components
SUPERIOR SEAL – Lap joint clamps provides superior sealing in connecting ID to OD pipes, while butt joint clamps provide superior sealing in connecting OD to OD
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
BETTER TOGETHER — Use Walker® accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade

from

$17.99

BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!

Product Features:

Stainless steel construction
Exhaust accessory that enables a complete installation process.
Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability

from

$1.76

Exhaust Manifold Stu

from

$5.79

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$24.25

The Febi exhaust brackets are easily installed and durably built. Highly resistant to rust and corrosion, they withstand the harsh environment underneath your vehicle-helping to ensure proper exhaust system performance.

Product Features:

Plated or coated for corrosion resistance
Direct replacement for a proper fit every time
Firmly mounts exhaust pipe underneath the car, helping to prevent pipe detachment, rattling noises, and exhaust failure
No special tools needed for replacement

from

$4.79

If the time has come to replace, install, or fix some components of the exhaust system, BRExhaust will have you covered with all necessary accessories, from bolts to hangers, that will help you complete the exhaust job quickly and easily. Getting mounting parts and other accessories and hardware from the manufacturer that designs exhaust systems for the leading North American carmakers will guarantee factory-like quality and perfect fit. Each and every accessory by BRExhaust is made of quality materials to ensure safe and secure exhaust system performance and long service life.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install

from

$21.06

Exhaust Clamp

from

$32.12

Exhaust Clamp

from

$1379.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

from

$182.99

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22924. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1985-1987 Volkswagen Golf and 1985 Volkswagen Jetta. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
Simplifies installation with essential gaskets and hardware being included in the box.
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

from

$10.99

As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Embossed steel construction
Embossed to increase loading in critical areas
Dana engineering-approved for fit, form and function

from

$11.49

As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$5.99

BRExhaust offers exhaust flange washers for use with their premium exhaust components. BRExhaust washers deliver the strength of steel, a proper fit and an easier install or repair. They’re available for fitment on a variety of year/make/model applications.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
Easy installation

from

$9.29

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

from

$9.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$817.99

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:

Mandrel bent tubing
409 Stainless Steel Construction
Increased Horsepower and Torque

from

$817.99

The MagnaFlow 1993-1999 Volkswagen Golf Touring Series Cat-Back Performance Exhaust System 15670 is the perfect partner for your 2.0L, 2.8L 1993-1999 Volkswagen Golf to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. 15670 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Volkswagen Golf exhaust system is compatible with 1993-1999 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen Golf like a glove. 15670 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:

Mandrel bent tubing
409 Stainless Steel Construction
Increased Horsepower and Torque

from

$1009.99

Pro series is designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
Dyno Proven: From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles
Sound And Style: Every Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Your Pickup
Easy Installation: Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
Limited Lifetime Warranty

from

$165.99

BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:

Direct-fit configuration
Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
Optimal noise reduction
Low backpressure and corrosion protection
Constructed using 16-gauge aluminized steel
Aluminized steel construction for maximum durability
Constructed to help reduce flex and withstand vehicle vibration

from

$161.99

Walker Resonators And Welded Resonator Assemblies provide precise tuning technologies to ensure excellent flow characteristics And OE-style sound. They feature 100% aluminized construction for longer life, quality appearance And favorable acoustics. These are OE-style resonators that fit, perform And sound like the original system.

Product Features:

EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system

from

$198.99

BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:

Direct-fit configuration
Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
Optimal noise reduction
Low backpressure and corrosion protection
Constructed using 16-gauge aluminized steel
Aluminized steel construction for maximum durability
Constructed to help reduce flex and withstand vehicle vibration