1999 Toyota Sienna Ignition and Tune-Up Products

Essential 1999 Toyota Sienna Ignition and Tune-Up Products

Carquest – Ignition Switch (Part No.CS535)

Ignition Switch

from

$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Vemo – Ignition Switch (Part No.M5050178870VMO)

Ignition Switch

from

$74.41
Ignition Switch

Carquest Premium – Ignition Module (Part No.CBG1072)

Ignition Module

from

$512.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

NGK – Coil on Plug Boot (Part No.59012)

Coil on Plug Boot

from

$9.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

NGK – Spark Plug Wire Set (Part No.7783)

Spark Plug Wire Set

from

$109.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Felpro – SPARK PLUG TUBE SEAL SET (Part No.ES 72701)

SPARK PLUG TUBE SEAL SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Nippon Reinz – Spark Plug tube Seal (Part No.A8027168107NRZ)

Spark Plug tube Seal

from

$4.49
Nippon Reinz Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.

Product Features:
  • Stays cool at temperature up to 1800F
  • Designed to seal minor surface irregularities
  • No re-torque required
  • Teflon® coating optional
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3663)

Ignition Knock (Detonation) Sensor

from

$84.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3696)

Ignition Knock (Detonation) Sensor

from

$172.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Power Steering Fluid - 12 oz

from

$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:
  • Unique friction technology provides efficient and noise-free operation
  • Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
  • Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
  • Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
  • Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
See More

Suncore – Shock Absorber (Part No.12S254040)

Shock Absorber

from

$34.99
Shock Absorber

Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7117)

Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications

from

$6.49
Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:
  • OE design provides an exact fit for your application
  • Provides excellent heat resistance as well as maximum protection against spark loss
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the spark plug boot
  • Design for direct compatibility
See More

DENSO – COP BOOTS (Part No.671-6315)

COP BOOTS

from

$61.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-6051)

Spark Plug Wire Set

from

$61.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – Coil on Plug Boot (Part No.59009)

Coil on Plug Boot

from

$7.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

NGK – Coil on Plug Boot (Part No.59010)

Coil on Plug Boot

from

$10.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48977)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$142.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1034)

Ignition Coil: Meets OE Specifications, 1 Count

from

$89.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1148)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$81.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Dorman – Knock Sensor And Harness Kit (Part No.926-387)

Knock Sensor And Harness Kit

from

$71.99
Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:
  • Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
  • Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
  • Quality assured – benchmarked against original components for performance and quality
  • Excellent value – original equipment quality at significant cost savings
See More

DENSO – First Time Fit Ignition Wire Set (Part No.F1020332900ND)

First Time Fit Ignition Wire Set

from

$77.94
The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Carbon fiberglass core for superior conductivity.
  • Fiberglass braiding for strength.
  • Conductive silicone layer for EMI/RFI noise suppression.
  • Silicone insulation for superior dielectric and heat performance.
  • Reinforced Kevlar core.
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16 (Part No.5343)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16

from

$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11 (Part No.3417)

Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, SK16HR11

from

$11.49
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PK20R11 (Part No.3128)

Double Platinum Spark Plug:  OE Performance, lasts 60K+ Miles, PK20R11

from

$9.79
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • OE grade platinum on both center and ground electrods
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
See More

ACDelco – Double Platinum Spark Plug (Part No.41-801)

Double Platinum Spark Plug

from

$9.79
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, BKR6EKPB-11 (Part No.3452)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, BKR6EKPB-11

from

$16.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
  • Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring compatibility and optimal performance.
  • Enhanced Performance: Provides stable idling, superior anti-fouling, improved fuel efficiency, and lower emissions.
  • Even Wear in Distributorless Ignition Systems: Most Laser Platinum spark plugs include a platinum pad on the ground electrode, promoting even wear and consistent performance.
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP5325)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK20R11 (Part No.3297)

Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, SK20R11

from

$10.79
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
  • Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
  • Fuel Efficiency: The DENSO Iridium Long Life plug helps in better conservation of fuel, making it an economical choice for long-term use.
See More

1999 Toyota Sienna Ignition and Tune-Up Products

You count on your 1999 Toyota Sienna to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 48 Ignition and Tune-Up Products ranging in price from $3.49 to $512.99, you’re sure to find everything you need for your 1999 Toyota Sienna.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 17 different brands like Autolite, NGK, and DENSO. 1999 Toyota Sienna Ignition and Tune-Up Products start as low as $3.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,311 extensive product reviews on 1999 Toyota Sienna Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.1 stars and Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition with 4.6 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1999 Toyota Sienna below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1999 Toyota Sienna

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Toyota Sienna running right for years to come. In our inventory you’ll find brands like Autolite, NGK, DENSO, and even more.

Popular Carquest Premium Ignition and Tune-Up Products

You’ll find popular Carquest Premium brand products across Ignition Boots. All are waiting to get your 1999 Toyota Sienna back on the road. Some of the top-rated Carquest Premium products in these categories are:
Spark Plug Wire Set
from $61.99
(2)
Spark Plug Wire Set
Spark Plug Boots

Top-Rated Autolite Iridium Ignition and Tune-Up Products


If Autolite Iridium are what you’re looking for, our inventory holds plenty. We stock Autolite Iridium brand Ignition and Tune-Up Products for your 1999 Toyota Sienna, and some of our most reviewed Autolite Iridium parts include:

FAQs for 1999 Toyota Sienna Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1999 Toyota Sienna?

Out of 48 Ignition and Tune-Up Products for the 1999 Toyota Sienna, the most popular in our inventory are:

What are the top-rated 1999 Toyota Sienna Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1999 Toyota Sienna based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $6.99
(184)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“Great product”
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
from $3.99
(105)
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
“Very nice quality. Installed like factory. Ran great.”