1999 Pontiac Firebird Camshafts

Essential 1999 Pontiac Firebird Camshafts

Felpro – CAMSHAFT THRUST PLATE SEAL SET (Part No.ES 73115)

CAMSHAFT THRUST PLATE SEAL SET

from

$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Sealed Power – Performance Camshaft (Part No.CS-1106R)

Performance Camshaft

from

$179.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Reliable performance with significant power increase vs stock
  • Good low-end torque
  • Recommended for tow vehicle, street rod or muscle car
  • Power range: 1000-3500rpm
  • Idle: stock
  • Cruise: 1600-2200rpm
See More

Edelbrock – Rollin’ Thunder Camshaft for 1987-Later Small-Block Chevy 265-350 V8 (Part No.2209)

Rollin' Thunder Camshaft for 1987-Later Small-Block Chevy 265-350 V8

from

$566.99
Edelbrock Rollin’ Thunder Camshaft #2209 is designed for 265-350 Chevy V8 engines from 1987-Later and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts should be matched with Performer manifolds for vehicles operating fro
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1889M)

Engine Camshaft Bearing Set

from

$26.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Delphi – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.SS10687)

Engine Variable Valve Timing (VVT) Adjuster Magnet

from

$75.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Manufactured to meet or exceed OE requirements
  • Part is validated, tested and matched to the right vehicle application
  • Designed digital output for maximum signal to noise ratio
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.CSA1757)

Engine Variable Valve Timing (VVT) Adjuster Magnet

from

$59.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Designed to meet or exceed OE specifications in fit, form, and function
  • End of the line tested to ensure proper function
  • Threaded mounting bolt, hardware and/or gaskets where applicable for easy installation
  • Global coverage for import and domestic applications
See More

Mahle – Camshaft Retainer (Part No.A4355425751MAH)

Camshaft Retainer

from

$31.69
Camshaft Retainer

MAHLE Original – Camshaft Cover (Part No.H36978)

Camshaft Cover

from

$4.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Engine Camshaft Retainer Plate (Part No.71-17533-00)

Engine Camshaft Retainer Plate

from

$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)

Engine Camshaft Bushing

from

$24.99
Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:
  • Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
  • 100% USA Made
  • Meets or exceeds OEM performance requirements
  • Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
See More

MAHLE Original – Camshaft Cover Plate (Part No.B32270)

Camshaft Cover Plate

from

$27.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – TIMING COVER GASKET SET (Part No.72696)

TIMING COVER GASKET SET

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Each gasket is built to meet or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT175)

Engine Camshaft Position Sensor Connector

from

$14.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
  • Featuring industrial grade materials for robust performance
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Cam, Crank And Ignition Harness (Part No.645-688)

Cam, Crank And Ignition Harness

from

$147.99
This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1019)

4WD Indicator Light Switch Connector

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mr. Gasket – Cam Change Gaskets (Part No.4406)

Cam Change Gaskets

from

$63.09
If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:
  • Contains all the gaskets needed to change out your camshaft
  • Fuel Injector O-Ring Not Included
  • Meets Performance Standards
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1064)

Camshaft Sensor

from

$59.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

NTK – Camshaft Position Sensor (Part No.EC0054)

Camshaft Position Sensor

from

$38.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Carquest – Engine Camshaft Position Sensor (Part No.35A1033)

Engine Camshaft Position Sensor

from

$39.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • 100% testing to meet OE performance
  • High temperature resistance for longer life
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1178)

Camshaft Sensor

from

$42.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

ACDelco – Engine Camshaft Position Sensor (Part No.213-346)

Engine Camshaft Position Sensor

from

$91.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Cam Bolt Lock Plate Kit

from

$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:
  • Black oxide finished steel
  • Includes (3) grade 5 bolts & locking plate
  • Fits Chevrolet Small and Big Block without OE roller cam
  • Tabs bend up around bolt head to secure
See More

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.

Product Features:
  • Black oxide coated Grade 5 steel
  • Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
  • Can be used as OE replacement
See More

ARP Auto Racing – Chevy Geniii/Ls Series Small Block, 20 Mm Under Head L, 10 Mm Socket Size (Part No.134-1002)

Chevy Geniii/Ls Series Small Block, 20 Mm Under Head L, 10 Mm Socket Size

from

$9.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:
  • Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
  • Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
  • Increased Material Strength Overcomes Valve Train Harmonics And Stress
  • Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
  • Set of 4
  • 180,000 PSI
  • .787″ Underhead Length
See More

1999 Pontiac Firebird Camshafts

Maybe you’re in the middle of a full rebuild of that 1999 Pontiac Firebird. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 22 different Camshafts in our inventory ranging from $9.99 to $533.99. That means you can find the exact parts or products you need to keep that 1999 Pontiac Firebird running smoothly.

Camshafts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Pontiac Firebird. Carquest Premium, Mahle, and Sealed Power are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Camshafts for your 1999 Pontiac Firebird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Camshafts to keep your 1999 Pontiac Firebird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Camshafts Brands To Make Your 1999 Pontiac Firebird Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Pontiac Firebird demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Firebird the best it can be. Be sure to browse some of our top Camshafts brands and parts.

Popular Dorman Camshafts

We carry Dorman parts in our stock across Camshaft Position Sensor Connectors categories, plus more. For a 1999 Pontiac Firebird, our most popular Dorman Camshafts include:
Cam, Crank And Ignition Harness
from $147.99
(1)
Cam, Crank And Ignition Harness
Camshaft Position Sensor Connectors

Top 1999 Pontiac Firebird Camshafts from MAHLE Original

MAHLE Original products are another trusted brand when it comes to Camshafts for your 1999 Pontiac Firebird. Popular MAHLE Original parts include:
Camshaft Cover Plate
from $27.99
(2)
Camshaft Cover Plate
Camshaft Gaskets

FAQs for 1999 Pontiac Firebird Camshafts

What are the most purchased Camshafts for the 1999 Pontiac Firebird?

Out of 22 Camshafts for the 1999 Pontiac Firebird, the most popular in our inventory are:
Camshaft Sensor
from $59.99
This product is not rated
Camshaft Sensor
Camshaft Position Sensors
Camshaft Sensor
from $48.99
This product is not rated
Camshaft Sensor
Camshaft Position Sensors
4WD Indicator Light Switch Connector
from $31.49
This product is not rated
4WD Indicator Light Switch Connector
Camshaft Position Sensor Connectors