Name: Steering Rack Boot Clamp
Brand: Febi
SKU: M1011755121FEB
Price: 4.05 USD

from

$4.05

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$421.91

P/S Pump

from

$221.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$329.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$32.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$25.99

Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Resistant to cracking and wear from heat cycles preventing fluid loss
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$34.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$143.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$478.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$730.07

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

OE quality and direct fit replacement
Manufactured based on highest quality OE standards

from

$656.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$805.07

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

OE quality and direct fit replacement
Manufactured based on highest quality OE standards

from

$24.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$19.99

This rack and pinion bellows kit is precision-engineered and rigorously tested to provide reliable replacement components for the original part on specific vehicles.

Product Features:

Direct replacement – this rack and pinion bellows kit has been reverse-engineered to match the fit and function of the stock part on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$18.69

The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$29.04

Steering Rack Boot Kit

from

$124.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$327.18

The Original Equipment Power Steering Pressure Line Assembly is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$126.68

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$123.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$6.99

More and more performance, less and less consumption – in order to meet the high demands placed on modern engines, automobile manufacturers demand the absolute highest levels of performance from the engine components used. The oil circuit is of central importance here, as only clean engine oil can permanently ensure consistent engine performance. If the circulating oil is not permanently freed of impurities and combustion residues, protection from wear is no longer guaranteed. In the worst case, this may even damage the engine. If you want to play it safe when choosing an oil filter, choose MANN-FILTER. They are designed for modern high-performance oils and can stand up to even the most demanding technical challenges. As the application areas of oil filters and the demands placed on them vary, MANN-FILTER oil filters are available in different designs.

Product Features:

Outstanding dirt holding capacity
Prolongs service intervals and continues to meet the technical requirements of high-performance engines
Offers even faster and optimized oil supply when starting the engine

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$28.99

POWER STEERINGFILTER

from

$35.14

Since 1932, the Cohline group of companies has manufactured tube and hose line systems for the automotive sector, commercial vehicles, construction and agricultural machinery, motor industry, and other automobile suppliers.

Product Features: