1999 Isuzu Hombre Belts and Hoses

Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.31" Diameter
Brand: Dayco
SKU: D71718
Price: 23.99 USD
Rating: 5.0 (7 reviews)

Below you will find various in-demand Isuzu Belts and Hoses, components and accessories for your 1999 Hombre. Advance Auto Parts has popular Hombre parts like Radiator Hoses, Pulleys, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other Hombre model years including 1996, 1997, 1998 and more. Select a category of 1999 Isuzu Hombre Belts and Hoses below and start saving instantly.

Popular 1999 Isuzu Hombre Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 1999 Isuzu Hombres

from

$23.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for improved leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimal inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Degrees F (+125 Degrees C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$16.49

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$26.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$22.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$96.99

Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:

Custom engineered to cover 35 million problem drive vehicles in operation
Designed as an improvement over OE to address problematic drive systems
Features a specially designed serpentine belt with specific compounds that mitigate noise

from

$107.99

This Litens Serpentine Belt Drive Component Kit fits 1996-2003 Chev C1500, C2500, Suburban, Express, Savanna / GMC C1500, C2500, C3500, Yukon w/4.3/5.0/5.7L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$58.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$33.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$24.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$22.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$30.49

ACDelco Gold (Professional) Accessory Drive Belt Idler Pulleys are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$14.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transportation applications.
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$53.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner includes the required hardware for proper installation

from

$68.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Made in the USA

from

$36.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$52.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$32.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.49

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$28.99

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$40.99

Steel and thermoplastic construction designed with tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE quality that fits virtually any domestic or import vehicle on the market
The bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high temperatures under the hood.
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in severe conditions

Upgrade your 1999 Isuzu Hombre with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1999 Isuzu Hombre, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Belts and Hoses are key to keeping your Hombre functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Belts and Hoses for the 1999 Isuzu Hombre, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1999 Isuzu Hombre at great prices. Our Belts and Hoses inventory for this model ranges from just $3.99 to $107.99, with an average price of $42.17. Our 47 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 1999 Isuzu Hombre without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Isuzu Hombre, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, DriveWorks, and more. Litens Belts and Hoses start at just $28.99 and boast an impressive 4.7 stars average rating from customers. Dayco and DriveWorks also bring quality to the table, with Belts and Hoses available starting at $18.79, and at an average 4.5 stars rating. With 1,472 customer reviews and counting, our 1999 Isuzu Hombre Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Isuzu Hombre is always ready to roll. We’re committed to providing you with everything you need to keep your Hombre in top shape, all in one place. Start shopping confidently below for your 1999 Isuzu Hombre!

Best-Selling Radiator Hoses for 1999 Isuzu Hombres

Enhance the driving experience in your Isuzu with 4 quality Radiator Hose components, starting at $16.49.

show more show less

from

$22.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$24.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$41.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$16.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top Picks for 1999 Isuzu Hombre Belt Tensioners

Upgrade Isuzu Hombres with top-quality Belt Tensioners parts, including 6 OEM and aftermarket selections for your 1999 model.

show more show less

from

$57.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: The dust shield protecting the bearing has been upgraded from the original design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. This tensioner is supplied with a new OE style mounting bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$53.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner includes the required hardware for proper installation

from

$68.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Made in the USA

from

$53.99

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

from

$67.99

This Litens aftermarket part is designed and engineered by Litens Automotive Group the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains General Motors original form, fit, and function specifications. Note: This tensioner comes complete with a new tensioner mounting bolt as well a an integrated lift feature on the tensioner arm to assist in belt mounting and removal. Specifically designed for 4-Cyl. 2.2 S Series Pickup, Sonoma, and Isuzu Hombre. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest the original equipment tensioner suppliers to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$74.99

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

In-Demand Serpentine and V Belts for 1999 Isuzu Hombres

Select from 14 premium Serpentine and V Belts parts for your 1999 Isuzu Hombre, with prices ranging from $18.79 to $107.99.

show more show less

from

$37.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$96.99

Custom engineered to cover 35 million problem drive vehicles in operation
Designed as an improvement over OE to address problematic drive systems
Features a specially designed serpentine belt with specific compounds that mitigate noise

from

$58.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$33.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$27.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$52.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$18.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$46.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$70.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$59.99

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all OEM specifications
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$107.99

Most Sold 1999 Isuzu Hombre Heater Hoses

Explore our best-selling Isuzu parts for the 1999 Hombre among 8 OEM and aftermarket options starting from $18.99.

show more show less

from

$26.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$36.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$40.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$22.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$19.29

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$18.99

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

from

$22.29

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 1999 Isuzu Hombre

Shop for the best-rated brands offering Belts and Hoses and other products for your 1999 Isuzu Hombres. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and DriveWorks, and more. Belts and Hoses from these brands that fit a 1999 Hombre start at just $18.79 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 1999 Isuzu Hombre Belts and Hoses

When it comes to maintaining or upgrading your 1999 Isuzu Hombre, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 1999 Isuzu Hombre. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $39.49. Plus, with over 17 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $28.99

(7)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter

“Did the job in quieting screech from bad bearing. Easy to install on Park Ave. Advance Auto had in stock. Good price with online discount. Store pi”

from $57.99

(5)

Accessory Drive Belt Tensioner – Original Equipment Quality

“The right part for my vehicle.”

from $31.49

(5)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“Works perfectly! The old one was squeaking and it was time to be replaced.”

Popular Dayco 1999 Isuzu Hombre Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 1999 Isuzu Hombre owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 1999 Hombre, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Isuzu in peak condition while saving money because prices on these Dayco Belts and Hoses range from $22.99 to $37.99, plus, with more than 126 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $26.99

(44)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter

“Perfect fit.”

from $22.99

(45)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.53" Diameter

“good fit”

from $37.99

(37)

Poly Rib Belt Serpentine Belt; 74.5 Long, 6 Rib Count

“I replaced the factory drive belt at close to 130,000 miles. I’m usually pretty meticulous about maintenance but this one slipped through the cracks. ”

FAQs for 1999 Isuzu Hombre Belts and Hoses

Which Belts and Hoses are best-sellers for 1999 Isuzu Hombres?

Out of 47 Belts and Hoses that fit 1999 Isuzu Hombres, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $34.99
Idler Pulley, Dayco (5160000) – $32.99
Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (3290125) – $33.49

What’s the price range for 1999 Isuzu Hombre Belts and Hoses?

Belts and Hose prices for the 1999 Isuzu Hombre start at $3.99 and go up to $107.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1999 Isuzu Hombre?

The average price for Belts and Hoses for the 1999 Isuzu Hombre is $42.17. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Isuzu Hombre model years?

Yes, we currently carry Belts and Hoses for 2 model years of Isuzu Hombres between 1996 and 1998. Belts and Hoses are bought most frequently for the following model years: 1998, 1997, and 1996.

What are the cheapest Belts and Hoses for my 1999 Isuzu Hombre?

The cheapest 1999 Isuzu Hombre Belts and Hoses we carry in stock are:

Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505007) – $3.99
Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (5191203) – $14.99
Premium Molded Heater Hose (10510790) – $16.49
Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (5061717) – $18.79
Molded 90 Degree Heater Hose (10504840) – $18.99

What are the top-rated Belts and Hoses that fit the 1999 Isuzu Hombre?

Out of 1,472 reviews by customers, our 1999 Isuzu Hombre Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1999 Isuzu Hombre and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457753) – $57.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (19130004) – $53.99
- Automatic Belt Tensioner (15130037) – $68.99
Radiator Hoses
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457753) – $57.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (19130004) – $53.99
- Automatic Belt Tensioner (15130037) – $68.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457753) – $57.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (19130004) – $53.99
- Automatic Belt Tensioner (15130037) – $68.99

What types of Belts and Hoses do you sell for my 1999 Isuzu Hombre?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1999 Isuzu Hombre:

Can I get help with 1999 Isuzu Hombre Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Belts and Hoses and more.

What is your return policy for Isuzu Hombre Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Isuzu Hombre Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Isuzu Hombre Belts and Hoses

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.31" Diameter (Part No.D71718)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25255)

Gates – Premium Molded Heater Hose (Part No.19025)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87769)

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60950K1)

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999010B)

Dayco – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.5060950)

Dayco – Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (Part No.5060640)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.25" Diameter (Part No.D71965)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.53" Diameter (Part No.C71723)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

ACDelco – Serpentine Idler/Tensioner Pulley: Direct Fit, Steel, 88.9 mm Diameter (Part No.15-20676)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38001)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89231)

Dayco – Automatic Belt Tensioner (Part No.89265)

Dayco – Poly Rib Belt, Premium, Dayco (Part No.5060655)

Dayco – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.5060870)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Idler Pulley, Dayco (Part No.89006)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900031A)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900029A)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38015)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.53" Diameter (Part No.C71723)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.25" Diameter (Part No.D71965)

Gates – Premium Molded Coolant Hose (Part No.22196)

Gates – Premium Molded Heater Hose (Part No.19025)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900029A)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900031A)

Dayco – Idler Pulley, Dayco (Part No.89006)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Idler Pulley, Dayco (Part No.89017)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38008)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38001)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38015)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999010A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89231)

Dayco – Automatic Belt Tensioner (Part No.89265)

Gates – DriveAlign« Automatic Belt Drive Tensioner (Part No.38103)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999039A)

Gates – DriveAlign« Automatic Belt Drive Tensioner (Part No.38165)

Dayco – Poly Rib Belt Serpentine Belt; 74.5 Long, 6 Rib Count (Part No.5060745)

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60950K1)

Dayco – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.5060950)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (Part No.5060640)

Driveworks – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.950K6)

Driveworks – Poly Rib Belt Serpentine Belt; 74.5 Long, 6 Rib Count (Part No.745K6)

Dayco – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.5060870)

Driveworks – Poly Rib Belt Serpentine Belt; 64 Long, 6 Rib Count (Part No.640K6)

Driveworks – Poly Rib Belt Serpentine Belt; 87.01 Long, 6 Rib Count (Part No.870K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K060744)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5060745K2)

Gates – Micro-V Serpentine Drive Belt (Part No.K060960)

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999010B)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, .63" Diameter (Part No.A71877)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 1/2 Inch Length (Part No.88389)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 13 1/2 Inch Length (Part No.87739)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 10 3/4 Inch Length (Part No.88405)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8 Inch Length (Part No.87769)

Gates – Premium Molded Heater Hose (Part No.18079)

Gates – Molded 90 Degree Heater Hose (Part No.28469)

Gates – Premium Molded Heater Hose (Part No.19707)