from

$46.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA oil and heat resistant standards and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand attached V-belts

from

$20.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$18.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$44.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$16.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$20.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$21.79

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$43.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand attached V-belts

from

$17.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$34.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$33.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$15.79

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$38.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$29.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$34.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High-modulus, high-strength pull cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes are available as Gates PowerBand V-Belts

from

$5.29

Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$39.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$14.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$37.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides optimal performance at extremely high operating temperatures.
Construction that resists cracking, wear, oil and heat
A special compound ensures unmatched stability, load capacity and belt life.
Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
Problem solver for failed disks
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$5.49

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$38.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Proprietary material provides maximum performance at extremely long operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique notch pattern offers greater flexibility for smaller diameter pulleys
Problem solver for troubled drives
Designed to save your fleet’s money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$19.49

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
The laminated construction helps absorb greater shock loads associated with diesel engines
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$37.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat-resistant construction throughout
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$44.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Crack, wear, oil, and heat resistant construction
A special compound ensures unmatched stability, load capacity and belt life.
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Designed to save your fleet’s money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$46.99

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
High modulus, high strength tensile cord
Oil and heat resistant construction
Meets SAE J636b and SAE J637 specifications
Meets RMA standards for oil and heat resistance and static conductivity requirements
NOTE: Some sizes available as Gates PowerBand joined V-belts

from

$5.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$40.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Proprietary material provides maximum performance at extremely long operating temperatures
Construction that resists cracking, wear, oil and heat
The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
Problem solver for failed disks
Engineered to save your fleet money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

1999 Isuzu FTR Serpentine and V Belts

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR28423)

Dayco – V-Belt, Top Cog, Dayco (Part No.22475)

Dayco – V-Belt, Top Cog, Dayco (Part No.22463)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22495)

Dayco – V-Belt, Top Cog, Dayco (Part No.22495)

Driveworks – Automotive V-Belt, Driveworks (Part No.41517)

Dayco – V-Belt, Top Cog, Dayco (Part No.22490)

Dayco – Bottom Cog V-Belt; 42 Inch Long, Exact Fit Premium Quality (Part No.15420)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22474)

Dayco – V-Belt, Top Cog, Dayco (Part No.22450)

Gates – Automotive XL High Capacity V-Belt (Part No.9405)

Gates – Automotive XL High Capacity V-Belt (Part No.9510)

Dayco – Bottom Cog V-Belt; 51 Inch Long, Exact Fit Premium Quality (Part No.17510)

Gates – Automotive XL High Capacity V-Belt (Part No.9400)

Gates – Automotive XL High Capacity V-Belt (Part No.9415)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22434)

Driveworks – Automotive V-Belt, Driveworks (Part No.42013)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22461)

Dayco – V-Belt, Top Cog, Dayco (Part No.22420)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9405HD)

Driveworks – Automotive V-Belt, Driveworks (Part No.51017)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9415HD)

Dayco – V-Belt, Top Cog (Part No.17400)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22485)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9510HD)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24465)

Driveworks – Automotive V-Belt, Driveworks (Part No.40017)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9400HD)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22434)

Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24465)

Dayco – V-Belt, Top Cog, Dayco (Part No.22463)