1999 Hyundai Accent Ignition and Tune-Up Products
More 1999 Hyundai Accent Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1999 Hyundai Accent, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1999 Hyundai Accent Ignition and Tune-Up Products
Carquest Premium – Spark Plug Wire Set (Part No.35-4271)
from
$44.99
CARQUEST Premium wire sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements and retain the original color, performance, fit, form and function of the OE wire.
Product Features:
See More
Product Features:
- SAE J2031 Class E cable resists heat, cold and electrical interference
- O.E./O.E.S. specified wire lengths
- O.E./O.E.S. specified insulators
- Limited lifetime warranty
NGK – Spark Plug Wire Set (Part No.8154)
from
$110.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Beck/Arnley – Premium Ignition Wire Set (Part No.175-6186)
from
$40.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Terminals are factory crimped for extra pull strength and reliable connections
- High quality construction for durability
- Designed for underhood conditions
- Application specific for this vehicle
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 4 Wire Set (Part No.671-4259)
from
$37.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
DENSO – Coil On Plug Boots-4 (Part No.671-4317)
from
$46.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
MANDO – OE Direct Ignition Coil (Part No.21A0101)
from
$49.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Direct Ignition Coils with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, HL Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1037)
from
$61.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Driveworks – Coil on Plug Coil (Part No.26407)
from
$71.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1692)
from
$51.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LKR6BHX-E (Part No.93763)
from
$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE t
Product Features:
See More
Product Features:
- HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, ZXU22HCR8 (Part No.3501)
from
$16.99
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
Original Equipment – Spark Plug (Part No.F1000653603OEA)
from
$20.32
Spark Plug
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP6203)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
NGK – Coil on Plug Boot (Part No.58989)
from
$11.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
NGK – NGK Ignition Wire Set (Part No.F1020108649NGK)
from
$74.59
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Spark Plug Wire Set (Part No.35-4292)
from
$43.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
Product Features:
See More
Product Features:
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Ignition Wire Set (Part No.F1020226142NGK)
from
$73.49
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7058)
from
$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Original Equipment – Knock Sensor (Part No.F6020256257OEA)
from
$62.04
The Original Equipment Knock Sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OEM quality direct fit application
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Mounting hole is the same size as OE
- Maintains OE specifications for frequency response
FAE – FAE Knock Sensor (Part No.F6020256253FAE)
from
$71.52
The FAE OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.
Product Features:
See More
Product Features:
- OEM quality direct fit application
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Mounting hole is the same size as OE
- Maintains OE specifications for frequency response
MTC – Knock Sensor (Part No.F6020256254MTC)
from
$55.45
The MTC OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.
Product Features:
See More
Product Features:
- OEM quality direct fit application
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Mounting hole is the same size as OE
- Maintains OE specifications for frequency response
Bosch – Knock Sensor (Part No.0261231007)
from
$44.99
Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%.
Product Features:
See More
Product Features:
- Bosch OE quality knock sensors for optimum engine protection
- Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
- Bosch OE quality knock sensors increase torque up to 5%
- Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3994)
from
$75.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Switch (Part No.CS636)
from
$17.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Carquest – Ignition Switch (Part No.CS1053)
from
$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Switch (Part No.CSC1166)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Switch (Part No.CS484)
from
$27.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Carquest – Ignition Switch (Part No.CS906)
from
$31.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Popular 1999 Hyundai Accent Ignition and Tune-Up Products Categories
1999 Hyundai Accent Ignition and Tune-Up Products
You count on your 1999 Hyundai Accent to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 40 Ignition and Tune-Up Products ranging in price from $2.49 to $110.99, you’re sure to find everything you need for your 1999 Hyundai Accent.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like NGK, Autolite, and DENSO. 1999 Hyundai Accent Ignition and Tune-Up Products start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,470 extensive product reviews on 1999 Hyundai Accent Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are PK16TT Platinum TT Spark Plug with 4.6 stars and Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1999 Hyundai Accent below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1999 Hyundai Accent
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Hyundai Accent running right for years to come. In our inventory you’ll find brands like NGK, Autolite, DENSO, and even more.
Popular Motorcraft Ignition and Tune-Up Products
You’ll find popular Motorcraft brand products across Spark Plugs. All are waiting to get your 1999 Hyundai Accent back on the road. Some of the top-rated Motorcraft products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 1999 Hyundai Accent, and some of our most reviewed NGK parts include:
FAQs for 1999 Hyundai Accent Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1999 Hyundai Accent?
Out of 40 Ignition and Tune-Up Products for the 1999 Hyundai Accent, the most popular in our inventory are:
from
$9.99
This product is not rated
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(126)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
What are the top-rated 1999 Hyundai Accent Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1999 Hyundai Accent based on customer reviews/ratings are:
from
$10.99
(75)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT
“made my 98 sentra se run alot better.increase in acceleration and gas.”
from
$6.79
(72)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
“Greatest”
