1999 Honda Civic Body Parts

Essential 1999 Honda Civic Body Parts

Atlas Lift – Lift Support (Part No.LS11221)

Lift Support

from

$33.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-745)

Window Regulator & Motor Assembly: Power, 1 Pack

from

$82.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
  • Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
See More

Dorman – Honda Bumper Retainer, Pack of 2 (Part No.963-519D)

Honda Bumper Retainer, Pack of 2

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Fender Splash Shield (Part No.HO1250106)

Fender Splash Shield

from

$74.99
New Standard Replacement Driver Side Front Inner Fender, Coupe Without SI Package

Product Features:
  • Coupe Without SI Package, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

K-Source – Passenger Car Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape & Instructions (Part No.90312)

Passenger Car Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape & Instructions

from

$22.79
Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • The most economical way to replace cracked Mirror glass
  • Glass measures 4 11/16″ tall by 6 5/6″ wide and 7 1/6″ diagonally
  • This glass DOES NOT having heating capabilities but can fit Mirrors with Manual, Heated Power and Power functions
  • Mounting tape included for low-hassle stick-on installation
  • Step-by-step instructions for easy installation
See More

Le Bra – Front End Cover (Part No.55168-01)

Front End Cover

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

KAI – New Standard Replacement Grille, For Coupe SI Models, Black (Part No.HO1200212)

New Standard Replacement Grille, For Coupe SI Models, Black

from

$138.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, for Coupe SI Models, Black. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • For Coupe SI Models, Black, Made Of ABS Thermoplastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Bumper Retainer Head Dia. 0.78 In. Shank Long 0.6 In. Hole Dia. 0.3 In. (Part No.963-620)

Bumper Retainer Head Dia. 0.78 In. Shank Long 0.6 In. Hole Dia. 0.3 In.

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Help – Exterior Door Handle Front Right (Part No.81424)

Exterior Door Handle Front Right

from

$44.49
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

K-Source – Mirror Assembly: Passenger Side, Manual Remote Adjustment, 1 Pk (Part No.63533H)

Mirror Assembly: Passenger Side, Manual Remote Adjustment, 1 Pk

from

$32.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass has manual remote adjustment
  • This Mirror does not fold
  • Textured Black
  • Superior material and manufacturing process ensures the highest quality possible
See More

KAI – Hood Panel (Part No.HO1230131PP)

Hood Panel

from

$459.99
New CAPA Certified Premium Replacement Hood Panel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MTC – Molding Clip (Part No.O5030424398MTC)

Molding Clip

from

$3.47
Molding Clip

Dorman – Hood And Trunk Molding Retainer (Part No.963-071D)

Hood And Trunk Molding Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Door Lock Kit (Part No.DLA1109)

Door Lock Kit

from

$31.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk (Part No.63627H)

Mirror Assembly: Passenger Side, Power Adjustment, Foldable, 1 Pk

from

$49.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Passenger side Mirror, tested to fit and function like the original, Meets or exceeds OEM standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black with Paintable to match cover
See More

KAI – Bumper Cover Retainer (Part No.HO1143111)

Bumper Cover Retainer

from

$3.99
New Standard Replacement Rear Passenger Side Bumper Cover Retainer, Sedan And Hybrid

Product Features:
  • Sedan And Hybrid, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Hood Prop Rod Clip Assortment (Part No.45887)

Hood Prop Rod Clip Assortment

from

$12.99
This direct-replacement hood prop rod clip matches the original equipment specifications to ensure reliable fit and function for this application. Made of quality materials, it is a cost-effective alternative to the dealer part.

Product Features:
  • Direct replacement – this hood prop rod clip matches original equipment specifications for a reliable repair
  • Durable materials – this clip is made from quality materials for a long service life
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than a dealer replacement
  • Confirmed fit – this clip has been verified to fit and function for this application
See More

Dorman – Dorman Hood Release Cable (Part No.O2030687349DOR)

Dorman Hood Release Cable

from

$17.57
Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:
  • Comes with handle (where applicable)
  • Direct replacement for a proper fit every time
  • Durably designed to resist breakage
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dorman – Help – Interior Door Handle Front/Rear Right Without Hole Black (Part No.92655)

Interior Door Handle Front/Rear Right Without Hole Black

from

$18.29
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Interior Door Handle Front Left Silver And Beige (Part No.96501)

Interior Door Handle Front Left Silver And Beige

from

$33.49
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Door Lock Actuator, Front Left, Rear Left (Part No.746-362)

Door Lock Actuator, Front Left, Rear Left

from

$33.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Door Lock Actuator Non Integrated (Part No.746-705)

Door Lock Actuator Non Integrated

from

$61.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Metro Mould – Door Seal (Part No.IS-LM 140)

Door Seal

from

$76.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals for Coupe or Hatchback (Imported). Each. piece 152-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
See More

Metro Mould – Door Seal (Part No.LM 152)

Door Seal

from

$190.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. For 2-door coupe and hatchback. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Dorman – Help – Hood Prop Rod Bushings (Part No.45888)

Hood Prop Rod Bushings

from

$13.99
This hood prop grommet is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this hood prop grommet is designed to match the fit and function of the original part on specified years, makes and models
  • Restores functionality – designed to restore the operation of the grommet that serves as the pivot point for the hood prop rod when the original grommet has broken due to wear and underhood heat
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Trunk Lid Seal (Part No.TK 70)

Trunk Lid Seal

from

$63.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Trunk Lid Seals that all have that show winning look and fit. Our Trunk Lid Seals have a perfect fit. Trunk Seal. For 2-door coupe. 130 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dual durometer rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

1999 Honda Civic Body Parts

You count on your 1999 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 85 Body Parts ranging in price from $0.99 to $459.99, you’re sure to find everything you need for your 1999 Honda Civic.

Brands matter. If you want to shop a specific Body Parts brand, we stock 16 different brands like Dorman, KAI, and K-Source. 1999 Honda Civic Body Parts start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 161 extensive product reviews on 1999 Honda Civic Body Parts. Some of the top-rated Body Parts products we carry are Window Regulator & Motor Assembly: Power, 1 Pack with 4.7 stars and Liftgate Lift Support: 24.68" Ext Length, 9.42" Travel, 79 Lbs of Force, 1 Pk with 3.5 stars.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1999 Honda Civic below to get started!

Top-Rated Body Parts Brands For Your 1999 Honda Civic

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Honda Civic running right for years to come. In our inventory you’ll find brands like Dorman, KAI, K-Source, and even more.

Popular AutoCraft Body Parts

You’ll find popular AutoCraft brand products across Vehicle Latches and Handles. All are waiting to get your 1999 Honda Civic back on the road. Some of the top-rated AutoCraft products in these categories are:
Exterior Door Handle
from $25.99
(1)
Exterior Door Handle
Exterior Door Handles

FAQs for 1999 Honda Civic Body Parts

What are the most purchased Body Parts for the 1999 Honda Civic?

Out of 85 Body Parts for the 1999 Honda Civic, the most popular in our inventory are:
Honda Bumper Retainer
from $4.49
This product is not rated
Honda Bumper Retainer
Bumper Pad Retainer Strips
Honda Splash Shield Retainer
from $4.99
This product is not rated
Honda Splash Shield Retainer
Fender Liner Retainers
Splash Shield Clip - Honda (sold by each)
from $1.29
This product is not rated
Splash Shield Clip – Honda (sold by each)
Fender Liner Retainers

What are the top-rated 1999 Honda Civic Body Parts?

Top-rated Body Parts for your 1999 Honda Civic based on customer reviews/ratings are:
Window Regulator & Motor Assembly: Power, 1 Pack
from $71.99
(3)
Window Regulator & Motor Assembly: Power, 1 Pack
“After 221,000 miles, the window motor stopped going up. The new Advance Auto Parts power window motor & Regulator Assemble was a perfect match, was p”
Liftgate Lift Support: 24.68" Ext Length, 9.42" Travel, 79 Lbs of Force, 1 Pk
from $31.99
(2)
Liftgate Lift Support: 24.68" Ext Length, 9.42" Travel, 79 Lbs of Force, 1 Pk
“This was a perfect replacement for my Honda Civic hatchback lift support. One hint – be sure that the hatch is completely (as in pushing it open as ha”
Window Regulator: Power, 1 Pack
from $30.99
(1)
Window Regulator: Power, 1 Pack
“It fit very well, good quality. Good product and a good price”