1999 GMC Sierra 1500 Coil and Leaf Springs
More 1999 GMC Sierra 1500 Coil and Leaf Springs
Find your specific 1999 GMC Sierra 1500 original or aftermarket Coil and Leaf Springs below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1999 GMC Sierra 1500 Coil and Leaf Springs
Belltech – 6 Inch Rear Drop (Part No.6616)
from
$579.99
Belltech flip kits are the leading standard in the industry. When a mild drop is just not enough, Belltech can bring the heat. Belltech flip kits provide dramatic Lowering on the rear of your sport truck or SUV by relocating the rear axle of your truck from under to on top of the Leaf Spring.
Product Features:
See More
Product Features:
- Belltech Flip Kits Provide Dramatic Lowering On The Rear Of Your Sport Truck Or SUV By Relocating The Rear Axle Of Your Truck From Under To On Top Of The Leaf Spring
- Kits Are Bulletproof Over Engineered Frame Modification And Reinforcement Systems That Allow For Additional Compression Or Upward Travel Of Your Rear Suspension, Essential In Limiting Bottoming Out
- All Belltech C-Section Kits Are Manufactured With Heavy Duty Stamped Steel Contoured To Match The Factory Frame Rails
- All Kits Feature A Durable Powder Coat Finish And The Highest Quality Hardware Using Grade 8 Fasteners
- Belltech C-Sections Are Designed To Increase Overall Suspension Travel On Vehicles Utilizing Lowering Kits That Create Limited Rear Axle Travel
MOOG – Coil Spring Set (Part No.60148)
from
$254.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Load Adjusting Shock Absorber (Part No.58636)
from
$189.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Load Adjusting Suspension Shock Absorber and Coil Spring Assembly Pack of 2 (Part No.58654)
from
$195.99
Product Features:
See More
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KAI – Hanger Kit (Part No.KYPKP19)
from
$74.99
New Standard Replacement Leaf Spring Hanger Kit, For 1500 Models, For Rear Of Leaf Spring
Product Features:
See More
Product Features:
- For 1500 Models, For Rear Of Leaf Spring, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
MOOG – Coil Spring Seat (Part No.K160311)
from
$12.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
Rare Parts – Spring Seat (Part No.RP47080)
from
$42.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
Dorman – Rear Leaf Spring Insert (Part No.924-070)
from
$12.99
This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
- Restores functionality – this spacer is made to fully restore part functionality after the original part fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Suspension Jounce Bumper (Part No.523-049)
from
$32.99
This leaf spring bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Leaf Spring Shackle Bracket (Part No.K150381)
from
$114.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to provide long life and dependability
Belltech – 2 Or 3 Inch Drop, Shock Absorbers Not Included, With Springs (Part No.23408)
from
$253.99
Belltech Lowering Coil Springs have been engineered to provide the visual lowering you are looking for with the OEM quality that you have come to expect from Belltech. Unlike many other offerings on the market, Belltech specializes in not only ride comfort and quality, but increasing the handling performance of your Sport Truck or SUV as well.
Product Features:
See More
Product Features:
- Combine With Other Lowering Components For Addition Lowering
- Each Coil Is Manufactured From Chromium Alloy Steel And Is Wound, Shot Peened Then Powder Coated To Exact Specifications To Assure The Proper Ride Height, Ride Quality
- Engineered For Performance And Comfort
- Lower Center Of Gravity
- Reduce Body Roll
Belltech – 4"Drop, Without Shock Absorbers, With Shackles/Leaf Spring Hangers/Bump Stop (Part No.6512)
from
$299.99
By engineering bracketry or replacement components Belltech Shackles and Hangers to reposition the front and/or rear Leaf Spring mounting points Spring eyes you can simply and effectively lower your Leaf Spring equipped sport truck or SUV without changing the factory Leaf Spring. This allows you to retain OEM Ride Quality and possibly more importantly factory load capacity. At Belltech, we offer both Belltech Shackles and Hangers as individual components as well as complete kits depending on your Lowering requirements. Belltech Hanger kits are designed to lower the rear of your sport truck or SUV 2 or 3 Inches while maintaining the OEM Quality Ride. Belltech Hanger kits are constructed from Heavy Gauge die stamped P and O Steel to insure a perfect fit and superior quality. All kits feature a durable powder coat finish and High Quality Hardware
Product Features:
See More
Product Features:
- To Reposition The Front And/Or Rear Leaf Spring Mounting Points Spring Eyes You Can Simply And Effectively Lower Your Leaf Spring Equipped Sport Truck Or SUV Without Changing The Factory Leaf Spring
- This Allows You To Retain OEM Ride Quality And Possibly More Importantly Factory Load Capacity
- Belltech Hanger Kits Are Designed To Lower The Rear Of Your Sport Truck Or SUV 2 Or 3 Inches While Maintaining The OEM Quality Ride
- Belltech Hanger Kits Are Constructed From Heavy Gauge Die Stamped P And O Steel To Insure A Perfect Fit And Superior Quality
- All Kits Feature A Durable Powder Coat Finish And The Highest Quality Hardware Using Grade 8 Fasteners
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2141R)
from
$116.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
MOOG – Leaf Spring Shackle Bushing (Part No.K201216)
from
$31.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Leaf Spring Shackle Bushing (Part No.K200897)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Belltech – 1/2 Inch Lift, Rubber Bushing, Set Of 2 (Part No.6404)
from
$104.99
By Engineering bracketry or replacement components Belltech Shackles and Hangers to reposition the front and/or rear Leaf Spring mounting points Spring eyes you can simply and effectively lower your Leaf Spring equipped sport truck or SUV without changing the factory Leaf Spring. This allows you to retain OEM Ride Quality and possibly more importantly factory load capacity. At Belltech, we offer both Belltech Shackles and Hangers as individual components as well as complete kits depending on your Lowering requirements. Belltech Shackle kits are designed drop the rear of your sport truck or SUV up to 2 Inches. For some applications we also offer a 1/2 Inch lifting Shackle kits. Belltech Shackle kits are constructed from Heavy Gauge die stamped P and O Steel to insure a perfect fit and superior quality. All Shackles are powder coated and feature OEM quality silent bloc rubber bushings and that do not need maintenance unlike polyurethane
Product Features:
See More
Product Features:
- To Reposition The Front And/Or Rear Leaf Spring Mounting Points Spring Eyes You Can Simply And Effectively Lower Your Leaf Spring Equipped Sport Truck Or SUV Without Changing The Factory Leaf Spring
- This Allows You To Retain OEM Ride Quality And Possibly More Importantly Factory Load Capacity
- Belltech Shackle Kits Are Designed Drop The Rear Of Your Sport Truck Or SUV Up To 2 Inches
- For Some Applications We Also Offer A 1/2 Inch Lifting Shackle Kits
- Belltech Shackle Kits Are Constructed From Heavy Gauge Die Stamped P And O Steel To Insure A Perfect Fit And Superior Quality
- All Shackles Are Powder Coated And Feature OEM Quality Silent Bloc Rubber Bushings And That Do Not Need Maintenance Unlike Polyurethane
Dorman – Leaf Spring Shackle Kit (Part No.722-121)
from
$31.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.
Product Features:
See More
Product Features:
- Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
- Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
- Excellent value – original equipment quality at a lower price
- Ready to install – all essential hardware is included for an easy installation
Carquest Premium – Leaf Spring Shackle (Part No.212-713097)
from
$49.99
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hardware included for easier installation (where applicable)
Dorman – Rear Position Leaf Spring Bracket Kit (Part No.722-032)
from
$173.99
This leaf spring hanger is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring hanger is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this hanger is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Monroe – Strut-Mate Coil Spring Insulator (Part No.907942)
from
$21.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
MOOG – Coil Spring Insulator (Part No.K160045)
from
$19.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Rare Parts – Coil Spring Insul (Part No.RP46346)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Dorman – Help – Leaf Spring Inserts (Part No.31067)
from
$11.99
This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1999 GMC Sierra 1500 Coil and Leaf Springs Categories
1999 GMC Sierra 1500 Coil and Leaf Springs
Maybe you’re in the middle of a full rebuild of that 1999 GMC Sierra 1500. Maybe you just need a couple of Coil and Leaf Springs. Either way, Advance Auto Parts has 23 different Coil and Leaf Springs in our inventory ranging from $11.99 to $306.99. That means you can find the exact parts or products you need to keep that 1999 GMC Sierra 1500 running smoothly.
Coil and Leaf Springs are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1999 GMC Sierra 1500. Dorman, Moog, and Monroe are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Coil and Leaf Springs for your 1999 GMC Sierra 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Coil and Leaf Springs to keep your 1999 GMC Sierra 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Coil and Leaf Springs Brands To Make Your 1999 GMC Sierra 1500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 GMC Sierra 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Coil and Leaf Springs make up Advance Auto Parts’ inventory, and all are ready to help make your Sierra 1500 the best it can be. Be sure to browse some of our top Coil and Leaf Springs brands and parts.
Popular Dorman Coil and Leaf Springs
We carry Dorman parts in our stock across Leaf Spring Shackles and Leaf Spring Hangers categories, plus more. For a 1999 GMC Sierra 1500, our most popular Dorman Coil and Leaf Springs include:
Top 1999 GMC Sierra 1500 Coil and Leaf Springs from Monroe
Monroe products are another trusted brand when it comes to Coil and Leaf Springs for your 1999 GMC Sierra 1500. Popular Monroe parts include:
FAQs for 1999 GMC Sierra 1500 Coil and Leaf Springs
What are the most purchased Coil and Leaf Springs for the 1999 GMC Sierra 1500?
Out of 23 Coil and Leaf Springs for the 1999 GMC Sierra 1500, the most popular in our inventory are:
