1999 GMC K1500 Performance and Racing Products
Find Your Specific 1999 GMC K1500 Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1999 K1500. Advance Auto Parts has popular K1500 parts like Performance Distributors, Performance Exhaust Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other K1500 model years including
1990,
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998 and more. Select a category of 1999 GMC K1500 Performance and Racing Products below and start saving instantly.
Popular 1999 GMC K1500 Performance and Racing Products Categories
Essential Performance and Racing Products for 1999 GMC K1500s
Richmond Gear – RngPnn (Part No.12BC373)
from
$191.99
RngPnn
Mr. Gasket – Valve Cover Gasket Set (Part No.182)
from
$51.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- This Gasket Has A Cork Rubber Blend
- Provides Excellent Sealing And Durability
- Extra Thick For The Hard To Seal Applications
Mr. Gasket – Valve Cover (Part No.9415)
from
$124.99
Chrome plated steel valve covers with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Center bolt design with ribbed top
- Has two openings in one cover & one opening in the other
- Includes rubber grommets and chrome oil filler cap
- Sold as a pair
- Has Ribs On The Top Of Each One
MSD Ignition – Wire Set; Street Fire; Small Block Chevy 350; HEI (Part No.5554)
from
$62.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
B & M – Tork Master 3000 (Part No.20402)
from
$562.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
B & M – Automatic Shifter, Stealth Pro Ratchet 3 and 4 Speed (Part No.81120)
from
$614.99
The Stealth Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter and will not allow y
Product Features:
See More
Product Features:
- Reverse Lockout Meets NHRA And IHRA Requirements
- Carbon Fiber Look Without The Cost
- Reliable And Race Proven Shifter Design
- Short Throw
- Stick Returns to Center
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1025)
from
$74.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Dynomax – Exhaust Tail Pipe (Part No.45683)
from
$76.99
Product Features:
See More
- IMPROVED FLOW CAPACITY: Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM: Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES: Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER: Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Hooker Headers – Super Competition Header Gasket (Part No.10809HKR)
from
$26.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)
from
$263.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.
Product Features:
See More
Product Features:
- Complete Super Tune Kit
- 8mm Spiral Core Wires
- Accel Classic Core Plugs
- High Performance Cap And Rotor
- Reduced Emissions
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-3013-2)
from
$367.99
K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your C1500, C2500, C35, C3500, K1500, K2500, K3500, Suburban 1500, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
- DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
- IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
- BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
- PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
- HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
- áMADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
Spectre – Spectre Air Intake Kit (Part No.9903)
from
$211.99
This Spectre air intake system for Chevrolet and GMC trucks is designed to get large horsepower and torque gains from select C1500, C2500, C3500, K1500, K2500 and K3500 models while working to protect your engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Chevy/GMC pickup engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Mr. Gasket – Intake Gasket (Part No.136G)
from
$51.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
Flowmaster Inc. – 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.524553)
from
$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)
from
$224.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$126.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$79.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Flowtech – Ceramic Header (Part No.31500FLT)
from
$511.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Exhaust Manifold/Header (Part No.11530FLT)
from
$261.99
Exhaust Manifold/Header
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$166.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Energy Suspension – Transmission Mount (Part No.3.1106R)
from
$90.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)
from
$46.49
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Upgrade your 1999 GMC K1500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1999 GMC K1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your K1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 49 Performance and Racing Products for the 1999 GMC K1500, designed to meet your needs without breaking the bank.
From
Performance Distributor
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1999 GMC K1500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $23.99 to $921.99, with
an average price of $277.90.
Our 49 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1999 GMC K1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 GMC K1500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like FEL-PRO Performance, B & M, Accel, and more.
FEL-PRO Performance Performance and Racing Products
start at just $31.49 and boast an impressive 4.2 stars average rating from customers.
B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $32.99, and at an average 4.1 stars rating.
With 226 customer reviews and counting, our 1999 GMC K1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1999 GMC K1500 is always ready to roll. We’re committed to providing you with everything you need to keep your K1500 in top shape, all in one place.
Start shopping confidently below for your 1999 GMC K1500!
Best-Selling Performance Distributors for 1999 GMC K1500s
Enhance the driving experience in your GMC with 2 quality Performance Distributor components, starting at $32.99.
Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
Accel – Tst GM 96-00 5.0/5.7L Vortech (Part No.TST3)
from
$263.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.
Product Features:
See More
Product Features:
- Complete Super Tune Kit
- 8mm Spiral Core Wires
- Accel Classic Core Plugs
- High Performance Cap And Rotor
- Reduced Emissions
Most Popular 1999 GMC K1500 Performance Exhaust Products
Customize your GMC with 10 Performance Exhaust Products products
like Performance Exhaust Mufflers,
Performance Exhaust Manifold Gaskets, and
Performance Exhaust Headers, all
priced under $357.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Flowmaster Inc. – 50 Series Muffler, 2.25in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.524553)
from
$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (Part No.17674)
from
$89.99
Product Features:
See More
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Dyno proven to flow up to 700 SCFM
- Dyno proven to flow up to 700 SCFM
Flowtech – Shorty; Smog Headers (Part No.91832FLT)
from
$357.99Product Features:
- Bolt On Quickly And Easily
- Top Performance/Clean Machine
- Increased Efficiency
- Leak Free Seal
- Connects To Exhaust Head Pipe
- Complete With Premium Gaskets
- 16-Gauge Tubing For Durability
Dynomax – Exhaust Tail Pipe (Part No.53068)
from
$50.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953048)
from
$152.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)
from
$204.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 50 Muffler, 2.5in Dual Offset Inlet 3in Center Outlet, Non-Reversible, Moderate Sound (Part No.8524553)
from
$224.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
Dynomax – Exhaust Tail Pipe (Part No.54021)
from
$53.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)
from
$169.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Deep aggressive exhaust note
- Noticeable interior resonance
- Excellent performance on high horsepower vehicles
- No internal packing to blowout
Top Picks for 1999 GMC K1500 Performance Engines
Upgrade GMC K1500s with top-quality Performance Engines parts, including 10 OEM and aftermarket selections for your 1999 model.
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$42.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for E-Tec 170 Small-Block Chevy (Part No.7235)
from
$47.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Intake Gasket (Part No.136G)
from
$51.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
In-Demand Performance Air Intake Kits for 1999 GMC K1500s
Select from 2 premium Performance Air Intake Kits parts for your 1999 GMC K1500, with prices ranging from $211.99 to $367.99.
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.57-3013-2)
from
$367.99
K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your C1500, C2500, C35, C3500, K1500, K2500, K3500, Suburban 1500, Tahoe, Yukon, and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
- DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
- IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
- BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
- PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
- HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
- áMADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
Spectre – Spectre Air Intake Kit (Part No.9903)
from
$211.99
This Spectre air intake system for Chevrolet and GMC trucks is designed to get large horsepower and torque gains from select C1500, C2500, C3500, K1500, K2500 and K3500 models while working to protect your engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Chevy/GMC pickup engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Most Sold 1999 GMC K1500 Performance Ignition Products
Explore our best-selling GMC parts for the 1999 K1500 among 4 OEM and aftermarket options starting from $34.49.
MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)
from
$219.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top-Rated Performance and Racing Products Brands For Your 1999 GMC K1500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1999 GMC K1500s. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1999 K1500 start at just $31.49 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular FEL-PRO Performance 1999 GMC K1500 Performance and Racing Products
When it comes to maintaining or upgrading your 1999 GMC K1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1999 GMC K1500. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.66. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular B & M 1999 GMC K1500 Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1999 GMC K1500 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1999 K1500, Advance Auto Parts carries a full inventory of 2 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $371.99 to $539.99, plus, with more than 2 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$371.99
(1)
Automatic Shifter, Sport Shifter
“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and
a knock out to drive.No down falls as far as I’m aw”
from
$539.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
FAQs for 1999 GMC K1500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1999 GMC K1500s?
Out of 49 Performance and Racing Products that fit 1999 GMC K1500s, the following parts are the top sellers:
- Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (18290065) – $89.99
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49
- Exhaust Manifold Gasket Set (5990955) – $31.49
What’s the price range for 1999 GMC K1500 Performance and Racing Products?
Performance and Racing Product prices for the 1999 GMC K1500 start at $23.99 and go up to $921.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1999 GMC K1500?
The average price for Performance and Racing Products for the 1999 GMC K1500 is $277.90. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC K1500 model years?
What are the cheapest Performance and Racing Products for my 1999 GMC K1500?
The cheapest 1999 GMC K1500 Performance and Racing Products we carry in stock are:
- PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.99
- Exhaust Manifold Gasket Set (5990955) – $31.49
- Engine Valve Cover Gasket Set (5992664) – $31.99
- High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (22904340) – $32.99
- Distributor Wiring Harness (17350080) – $34.49
What are the top-rated Performance and Racing Products that fit the 1999 GMC K1500?
Out of 226 reviews by customers, our 1999 GMC K1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1999 GMC K1500 and their top-rated products:
- Performance Drivetrains
- Differential Ring And Pinion (10584326) – $342.99
- Performance Air Intake Kits
- Differential Ring And Pinion (10584326) – $342.99
- Performance Shifters
- Differential Ring And Pinion (10584326) – $342.99
What types of Performance and Racing Products do you sell for my 1999 GMC K1500?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1999 GMC K1500:
Can I get help with 1999 GMC K1500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC K1500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC K1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
