1999 Ford Mustang Steering and Chassis Parts

Name: Rack and Pinion Bushing Set
Brand: Energy Suspension
SKU: 4.10103R
Price: 18.99 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 1999 Mustang. Advance Auto Parts has popular Mustang parts like Ball Joints, Power Steering Parts, Steering Shafts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1999 Ford Mustang Steering and Chassis Parts below and start saving instantly.

Popular 1999 Ford Mustang Steering and Chassis Parts Categories

Steering Shaft Bearings

Power Steering Coolers

Suspension Ball Joint Kits

Steering Shaft U-Joints

Power Steering Pumps

Sway Bar Link Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Front Alignment Kits

Power Steering Pump Pulleys

Subframe Bushings

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Power Steering Hose Washer

Power Steering Pump Caps

Power Steering Pump Kits

Tie Rod End Boots

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Rack and Pinion Mounts

Pinion Bearings

Sway Bar Bushings

Rack and Pinion Bushings

Power Steering Pressure Switch Connectors

Power Steering Pump Seal Kits

Rack and Pinion Seals

Pump Shaft Seals

Ball Joint Boots

Power Steering Pressure Sensor Connector

Essential Steering and Chassis Parts for 1999 Ford Mustangs

from

$18.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$17.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$372.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$60.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA

from

$98.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.49

from

$28.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$145.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$84.99

This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.

Product Features:

Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
Durable materials – this shift boot is manufactured from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$33.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$30.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$63.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$36.49

3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$5.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$44.99

Suspension Ball Joint Kit

from

$43.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$128.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$27.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$7.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$24.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$4.49

This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.79

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Upgrade your 1999 Ford Mustang with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1999 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 124 Steering and Chassis Parts for the 1999 Ford Mustang, designed to meet your needs without breaking the bank. From Ball Joint replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1999 Ford Mustang at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.99 to $523.99, with an average price of $51.58. Our 124 Steering and Chassis Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1999 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Ford Mustang, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Driveworks, Imperial, Cardone, and more. Driveworks Steering and Chassis Parts start at just $8.99 and boast an impressive 4 stars average rating from customers. Imperial and Cardone also bring quality to the table, with Steering and Chassis Parts available starting at $11.49, and at an average 4 stars rating. With 1,599 customer reviews and counting, our 1999 Ford Mustang Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1999 Ford Mustang!

Best-Selling Ball Joints for 1999 Ford Mustangs

Enhance the driving experience in your Ford with 13 quality Ball Joint components, starting at $5.99.

show more show less

from

$179.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$173.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$174.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$60.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$36.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$153.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$131.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$6.99

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$74.73

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories

from

$108.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$68.99

High Quality Greaseable replacment Ball Joint

Product Features:

Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$22.74

Driveworks, Ball Joint

Most Popular 1999 Ford Mustang Power Steering Parts

Customize your Ford with 62 Power Steering Parts products like Power Steering Pumps, Power Steering Pressure Hoses, and Power Steering Return Hoses, all priced under $405.20.

show more show less

from

$20.29

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$17.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$18.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$36.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Each of these power steering pressure switches is 100% pressure tested to ensure that the part you receive will outperform any other switch available in the aftermarket.
Every one of our switch connectors has been carefully crafted to ensure proper fitment, as engine management systems require reliable connections in order to reach optimum performance.
Each switch that we offer endures rigorous end of line testing to ensure that every part meets the linearity specifications expected by the engine management system in your vehicle.

from

$38.99

from

$26.99

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$7.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$4.49

Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$79.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$216.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$13.79

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$291.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$33.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$109.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$2.99

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$45.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$34.49

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$61.99

from

$50.99

from

$7.79

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$17.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$90.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$97.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$36.49

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$47.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$17.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$17.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$34.36

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.

from

$27.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$99.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$29.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$55.99

from

$50.99

from

$63.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$405.20

Steering Rack

from

$198.26

Steering Rack

from

$191.88

Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:

OEM-Quality and Direct Fit replacement
Components are inspected and cleaned of rust and corrosion.
Shaft and internal surfaces are inspected, reconditioned and polished.
Seals and O-rings are replaced with new, OE-equivalent parts.
Assembled units are 100% functionally tested for leaks and performance.

Top Picks for 1999 Ford Mustang Steering Shafts

Upgrade Ford Mustangs with top-quality Steering Shafts parts, including 5 OEM and aftermarket selections for your 1999 model.

show more show less

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$84.99

Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
Durable materials – this shift boot is manufactured from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$8.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$523.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$18.99

This steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Tie Rods for 1999 Ford Mustangs

Select from 10 premium Tie Rods parts for your 1999 Ford Mustang, with prices ranging from $5.99 to $94.99.

show more show less

from

$24.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$24.49

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$44.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$51.99

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$57.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$94.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$35.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Sold 1999 Ford Mustang Sway Bars

Explore our best-selling Ford parts for the 1999 Mustang among 28 OEM and aftermarket options starting from $9.56.

show more show less

from

$20.49

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$16.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$18.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$26.99

Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$36.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$25.99

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$42.99

Split design allows for easier installation
Replacement can reduce front end noise
Restores like-new steering and handling
Bushings engineered to provide long life and dependability
Incorporates proven design and engineering features
Inner sleeve is phosphate coated for corrosion protection

from

$21.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$29.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$25.99

SwyBarLink

from

$19.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$18.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$28.49

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$26.99

SwyBarLink

from

$24.63

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$19.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$19.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$19.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$18.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$18.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$18.79

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$16.24

Sway Bar Link Kit

from

$14.99

This suspension stabilizer bar bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$14.99

This suspension stabilizer bar bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$9.56

SWAY BAR LINK KIT

Top-Rated Steering and Chassis Parts Brands For Your 1999 Ford Mustang

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1999 Ford Mustangs. Below you’ll find some of our best rated Steering and Chassis Parts from Driveworks, Imperial, and Cardone, and more. Steering and Chassis Parts from these brands that fit a 1999 Mustang start at just $8.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1999 Ford Mustang Steering and Chassis Parts

When it comes to maintaining or upgrading your 1999 Ford Mustang, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Steering and Chassis Parts, specifically designed for the 1999 Ford Mustang. With over 7 Driveworks brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $20.78. Plus, with over 147 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$22.74

This product is not rated

Driveworks, Ball Joint

“”

from
$10.29

(70)

Taper Bearing Set

“Good”

from
$24.99

(21)

Steering Tie Rod End

“Good price and part”

Popular Imperial 1999 Ford Mustang Steering and Chassis Parts

Imperial auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1999 Ford Mustang owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1999 Mustang, Advance Auto Parts carries a full inventory of 5 Imperial Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Imperial Steering and Chassis Parts range from $11.49 to $32.49, plus, with more than 211 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

FAQs for 1999 Ford Mustang Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1999 Ford Mustangs?

Out of 124 Steering and Chassis Parts that fit 1999 Ford Mustangs, the following parts are the top sellers:

Taper Bearing Set (5050529) – $10.29
New Power Steering Filter (10417593) – $31.99
3/8" ID Return Hose (sold by each) (18070570) – $2.99

What’s the price range for 1999 Ford Mustang Steering and Chassis Parts?

Steering and Chassis Part prices for the 1999 Ford Mustang start at $2.99 and go up to $523.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1999 Ford Mustang?

The average price for Steering and Chassis Parts for the 1999 Ford Mustang is $51.58. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Mustang model years?

Yes, we currently carry Steering and Chassis Parts for 55 model years of Ford Mustangs between 1964 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 1999 Ford Mustang?

The cheapest 1999 Ford Mustang Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $2.99
Power Steering Caps – Power Steering Sealing Washer Assortment (17190459) – $4.49
Bearings (3277461) – $5.79
Tie Rod Dust Boot (22906873) – $5.99
Ball Joint Dust Boot Set (22906818) – $5.99

What are the top-rated Steering and Chassis Parts that fit the 1999 Ford Mustang?

Out of 1,599 reviews by customers, our 1999 Ford Mustang Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1999 Ford Mustang and their top-rated products:

Sway Bars
- Stabilizer Bar Link Kit (10575043) – $20.49
- Sway Bar Link Kits (15510372) – $16.99
Tie Rods
- Stabilizer Bar Link Kit (10575043) – $20.49
- Sway Bar Link Kits (15510372) – $16.99

What types of Steering and Chassis Parts do you sell for my 1999 Ford Mustang?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1999 Ford Mustang:

Can I get help with 1999 Ford Mustang Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Mustang Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Ford Mustang Steering and Chassis Parts

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10103R)

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10102R)

Whiteline – Sway Bar Link (Part No.KLC170)

Dorman – Lower Steering Shaft (Part No.425-376)

MOOG – Tie Rod End (Part No.EV117)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Swivel "O" Ring x 9/16" Long Swivel "O" Ring (Part No.36645)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

MOOG – Camber Adjusting Kit (Part No.K100024)

Powercraft – Rack Pinion Seal Kit (Part No.8913)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)

Dorman – Upper Steering Shaft Joint (Part No.425-302)

Dorman – Power Steering Pump Pulley (Part No.300-010)

Rare Parts – Ball Joint (Part No.RP10141)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5162R)

Cardone – Remanufactured Power Steering Pump (Part No.20-6240)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

National – Bearings (Part No.LM67010)

Driveworks – Taper Bearing Set (Part No.S-A-5)

Driveworks – Suspension Ball Joint Kit (Part No.DW-K500033)

MOOG – Stabilizer Bar Link (Part No.K750139)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-202T)

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Dorman – Help – Power Steering Caps (Part No.82582)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Driveworks – Steering Tie Rod End (Part No.DW-ES3184RL)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Powercraft – Pump Seal Kit (Part No.8526)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620899)

Dorman – Suspension Control Arm (Part No.520-235)

Dorman – Suspension Control Arm (Part No.520-236)

MOOG – Ball Joint (Part No.K8749)

Driveworks – Suspension Ball Joint (Part No.DW-K8749)

Rare Parts – Ball Joint (Part No.RP11936)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620900)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130G)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)

TRW – Ball Joint (Part No.L2020674303TRW)

Rare Parts – Ball Joint (Part No.RP11083)

Whiteline – Ball Joint Lower (Part No.W53558)

DriveWorks – Driveworks, Ball Joint (Part No.L20201004578DRV)

Dorman – Help – Power Steering Reservoir Caps (Part No.82726)

MOOG – Rack & Pinion Bellows Kit (Part No.K8439)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10103R)

Imperial – Mounting Kit System (Part No.226201)

Carquest – Power Steering Pressure Switch (Part No.PS104)

Carquest Premium – 3/8" I.D. Return Hose CPE (Part No.36219)

MOOG – Rack & Pinion Mounting Bushing (Part No.K8422)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Dorman – Help – Power Steering Caps (Part No.82582)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Cardone – Remanufactured Power Steering Pump (Part No.20-7252)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-245)

Powercraft – Pump Seal Kit (Part No.8526)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Quick Connect Coupler (Part No.240250)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-238)

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-900)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Cardone – Remanufactured Power Steering Pump (Part No.20-281P1)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Powercraft – Pump Complete Rebuild Kit (Part No.8527)

Dorman – Power Steering Pump Pulley (Part No.300-028)

National – Bearings (Part No.LM67010)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Swivel "O" Ring x 18mm Male "O" Ring (Part No.36542)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 9/16" Long Male Swivel "O" Ring (Part No.36545)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10104R)

Cardone – Remanufactured Power Steering Pump (Part No.20-281)

Lares – Remanufactured Power Steering Pump (Part No.2375)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1012)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Powercraft – Pump Seal Kit (Part No.8634)

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10103G)

Energy Suspension – Rack and Pinion Bushing Set (Part No.4.10104G)