1999 Ford Mustang Performance and Racing Products

Name: Ball Joint Dust Boot Set
Brand: Energy Suspension
SKU: 9.13130R
Price: 9.99 USD

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1999 Mustang. Advance Auto Parts has popular Mustang parts like Performance Exhaust Products, Performance Air Filters, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 1999 Ford Mustang Performance and Racing Products below and start saving instantly.

Popular 1999 Ford Mustang Performance and Racing Products Categories

Performance Oil Filters

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Engine Cold Air Intakes

Performance Shifters

Performance Exhaust System Kits

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Differential Covers

Performance Coil Spring Insulators

Performance Engine Valve Springs

Performance Chassis Bushing Kits

Performance Upper Performance Control Arm Bushings

Performance Chassis Bump Stops

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Clutch Pivot Balls

Performance Ball Joint Boots

Performance Subframe Bushing Kits

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Essential Performance and Racing Products for 1999 Ford Mustangs

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$528.99

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats

Product Features:

Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
Kits designed for hydraulic roller cams
.625″ maximum lift springs

from

$157.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$399.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$96.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Made of Superior Hyper-Flex+ Material
Maintain Proper Caster Alignment

from

$78.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for Ford TFI coil
85:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions
CARB E.O. Approved

from

$349.99

Shifter – Performance

from

$249.99

The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$77.99

The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$185.99

RngPnn

from

$145.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

from

$863.99

The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

Crafted from 409 stainless steel with all mandrel-bent tubing
Increased horsepower and torque
Aggressive exterior sound

from

$444.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$19.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$13.99

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$419.99

The K&N 71-3527 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory mass air sensor, crank case vent hose and EVAP vent line where equipped. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-3527 vehicle applications to determine the legal status for each vehicle.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$54.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$83.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

from

$367.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$46.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$19.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$87.99

Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.

Product Features:

Chrome plated steel for looks
Includes bolts and gasket

from

$141.99

Product Features:

Use W/ Valve Springs Part #5722, 5796
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$363.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$221.99

Product Features:

Case-Hardened Tubing
Surface Hardening
Welded Ends
0.3125 in. Diameter
Use with or without Hardened Steel Guideplates

from

$200.99

Edelbrock part #9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise f

Product Features:

7.7 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

Upgrade your 1999 Ford Mustang with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1999 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 102 Performance and Racing Products for the 1999 Ford Mustang, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Air Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1999 Ford Mustang at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $2,367.00, with an average price of $312.74. Our 102 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 1999 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Ford Mustang, we stock popular OEM and aftermarket Performance and Racing Products from top names like SCT Performance, K&N, Flowmaster Inc., and more. SCT Performance Performance and Racing Products start at just $399.99 and boast an impressive 5.0 stars average rating from customers. K&N and Flowmaster Inc. also bring quality to the table, with Performance and Racing Products available starting at $17.99, and at an average 4.8 stars rating. With 622 customer reviews and counting, our 1999 Ford Mustang Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1999 Ford Mustang!

Best-Selling Performance Exhaust Products for 1999 Ford Mustangs

Enhance the driving experience in your Ford with 5 quality Performance Exhaust Product components, starting at $99.99.

show more show less

from

$134.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$99.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$184.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$136.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$861.99

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15644 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15644 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques
Dyno-proven performance

Most Popular 1999 Ford Mustang Performance Air Filters

Customize your Ford with 3 Performance Air Filters products like Performance Air Filters, all priced under $83.99.

show more show less

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$83.99

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

from

$49.99

This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.

Product Features:

HPR OE Replacement Air Filter
High flow replacement filter designed to fit perfectly in your stock air box
Engineered for increased flow and greater performance
Fits multiple Ford applications
Factory pre-oiled and ready to use
Easy to install with no special tools or skills required

Top Picks for 1999 Ford Mustang Performance Oil Filters

Upgrade Ford Mustangs with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 1999 model.

show more show less

from

$17.99

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

In-Demand Performance Ignition Products for 1999 Ford Mustangs

Select from 3 premium Performance Ignition Products parts for your 1999 Ford Mustang, with prices ranging from $27.99 to $199.99.

show more show less

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$27.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-503
MSD 8242 82428
Resists Shock And Vibration
Resists Corrosion

from

$199.99

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Most Sold 1999 Ford Mustang Performance Engines

Explore our best-selling Ford parts for the 1999 Mustang among 38 OEM and aftermarket options starting from $10.99.

show more show less

from

$528.99

Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
Kits designed for hydraulic roller cams
.625″ maximum lift springs

from

$2367.00

XE-R 226/224 MOD4V

from

$2367.00

XRPM 230/230MOD4V

from

$2367.00

XERSC 230/232 FORD4V

from

$2367.00

XERSC 238/240 FORD4V

from

$2367.00

XERSC 222/224 FORD4V

from

$2367.00

XRPM 218/218MOD4V

from

$2367.00

XE-R 242/240 MOD4V

from

$2367.00

XRPM 234/230MOD4V

from

$2106.00

XRPM 226/222MOD4V

from

$2106.00

XE-R 234/232 MOD4V

from

$1041.00

XE 236/240 MOD2V

from

$1041.00

XE 226/230 MOD2VPI

from

$1041.00

XE 224/232MOD2V

from

$1041.00

XE 242/246MOD2VPI

from

$1041.00

XE 230/236 MOD2V

from

$1004.00

TPX 212/222MOD2V

from

$933.99

32 Springs

from

$933.99

32 Springs

7 Degree Titanium Retainer Set of 24 for Ford 4.6L 3 Valve with 26113 Springs

from

$731.99

7 Degree Titanium Retainer Set of 24 for Ford 4.6L 3 Valve with 26113 Springs

from

$407.99

ENGINE ROCKER ARM

from

$309.99

16 Springs

from

$245.99

The Edelbrock part #8804 Long Water Pump designed for Ford 4.6L V8 Mustangs is ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using State-Of-The-Art Racing Technology, Edelbrock has designed these “

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
3.43 in. Block To Hub Height
Satin Finish

Steel Retainer Set of 32 for Ford 4.6 4 Valve with 26123 Beehive Springs

from

$241.99

Steel Retainer Set of 32 for Ford 4.6 4 Valve with 26123 Beehive Springs

Top-Rated Performance and Racing Products Brands For Your 1999 Ford Mustang

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1999 Ford Mustangs. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance, K&N, and Flowmaster Inc., and more. Performance and Racing Products from these brands that fit a 1999 Mustang start at just $17.99 and are rated as high as 5.0 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular SCT Performance 1999 Ford Mustang Performance and Racing Products

When it comes to maintaining or upgrading your 1999 Ford Mustang, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 1999 Ford Mustang. With over 2 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $399.99, with an average price of just $499.99. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $399.99

(1)

Preloaded Performance Programmer for Increased Horsepower & Torque

“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”

from $599.99

(1)

Livewire TS Plus Performance Programmer and Monitor

“I bought it for my f350 2008 6.4 and it worked perfectly”

Popular K&N 1999 Ford Mustang Performance and Racing Products

K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1999 Ford Mustang owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1999 Mustang, Advance Auto Parts carries a full inventory of 3 K&N Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these K&N Performance and Racing Products range from $17.99 to $83.99, plus, with more than 195 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $83.99

(88)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

“5 Star Review”

from $17.99

(99)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Great product. Great service.”

from $83.99

(8)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

“Installed on a 94 v6 stang with the air silencer gone, the sweet sound of the k&n filter inhaling air is just beautiful. Though the gains are small de”

FAQs for 1999 Ford Mustang Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1999 Ford Mustangs?

Out of 102 Performance and Racing Products that fit 1999 Ford Mustangs, the following parts are the top sellers:

Spectre Replacement Air Filter (10162674) – $49.99
High-Performance Ignition Coils for Ford 2-Valve Engines (16370006) – $27.99
40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (16120041) – $99.99

What’s the price range for 1999 Ford Mustang Performance and Racing Products?

Performance and Racing Product prices for the 1999 Ford Mustang start at $9.99 and go up to $2,367.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1999 Ford Mustang?

The average price for Performance and Racing Products for the 1999 Ford Mustang is $312.74. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford Mustang model years?

Yes, we currently carry Performance and Racing Products for 55 model years of Ford Mustangs between 1964 and 2025. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Performance and Racing Products for my 1999 Ford Mustang?

The cheapest 1999 Ford Mustang Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $9.99
Ball Joint Dust Boot Set (22906818) – $9.99
Tie Rod Dust Boot (22906874) – $9.99
Steel Retainer for Ford 4.6 4 Valve with 26123 Beehive Springs (50289511) – $10.99
Steel Retainer for Ford 3.8/4.2L with STock Valve Spring Diameter (50289140) – $10.99

What are the top-rated Performance and Racing Products that fit the 1999 Ford Mustang?

Out of 622 reviews by customers, our 1999 Ford Mustang Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1999 Ford Mustang and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99
Performance Air Filters
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99
Performance Steering Products
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120020) – $17.99

What types of Performance and Racing Products do you sell for my 1999 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1999 Ford Mustang:

Can I get help with 1999 Ford Mustang Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford Mustang Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford Mustang Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Ford Mustang Performance and Racing Products

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130R)

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

Energy Suspension – Control Arm Bushing Set (Part No.4.3161R)

MSD Ignition – Ignition Coil (Part No.8227)

Hurst – Shifter – Performance (Part No.3677640)

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)

Richmond Gear – RngPnn (Part No.F9600)

Energy Suspension – Control Arm Bushing Set (Part No.4.3115G)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.15677)

Energy Suspension – Hyper-Flex System (Part No.4.18109R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5101G)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

Energy Suspension – Control Arm Bump Stop Set (Part No.4.6103R)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.71-3527)

Energy Suspension – Transmission Mount (Part No.4.1104G)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1570)

K&N – Cold Air Intake: Adds Up To 19 Horsepower, With Million Mile Air Filter (Part No.63-2606)

Energy Suspension – Coil Spring Isolator Set (Part No.4.6102R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193G)

Mr. Gasket – Differential Cover Kit (Part No.9893G)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam (Part No.33-221-3)

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Edelbrock – Pushrod Set for Ford 351W (Part No.9659)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15644)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-0945)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-0940)

Spectre – Spectre Replacement Air Filter (Part No.HPR8039)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

Mallory – Unilite Ignition Module (Part No.605)

Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

Competition Cams – XE-R 226/224 MOD4V (Part No.106300)

Competition Cams – XRPM 230/230MOD4V (Part No.106160)

Competition Cams – XERSC 230/232 FORD4V (Part No.106360)

Competition Cams – XERSC 238/240 FORD4V (Part No.106460)

Competition Cams – XERSC 222/224 FORD4V (Part No.106260)

Competition Cams – XRPM 218/218MOD4V (Part No.106060)

Competition Cams – XE-R 242/240 MOD4V (Part No.106500)

Competition Cams – XRPM 234/230MOD4V (Part No.106200)

Competition Cams – XRPM 226/222MOD4V (Part No.106100)

Competition Cams – XE-R 234/232 MOD4V (Part No.106400)

Competition Cams – XE 236/240 MOD2V (Part No.102300)

Competition Cams – XE 226/230 MOD2VPI (Part No.102500)

Competition Cams – XE 224/232MOD2V (Part No.102100)

Competition Cams – XE 242/246MOD2VPI (Part No.102700)

Competition Cams – XE 230/236 MOD2V (Part No.102200)

Competition Cams – TPX 212/222MOD2V (Part No.102525)

Competition Cams – 32 Springs (Part No.26125-32)

Competition Cams – 32 Springs (Part No.26123-32)

Competition Cams – 7 Degree Titanium Retainer Set of 24 for Ford 4.6L 3 Valve with 26113 Springs (Part No.702-24)

Competition Cams – ENGINE ROCKER ARM (Part No.1619-12)

Competition Cams – 16 Springs (Part No.26123-16)

Edelbrock – Water Pump Ford 4.6L V8 Mustang Long (Part No.8804)

Competition Cams – Steel Retainer Set of 32 for Ford 4.6 4 Valve with 26123 Beehive Springs (Part No.799-32)