1999 Ford E-350 Econoline Transmission Parts

Below you will find various in-demand Ford Transmission Parts, components and accessories for your 1999 E-350 Econoline. Advance Auto Parts has popular E-350 Econoline parts like Transmission Mounts, Transmission Cooler and Parts, Transmission Seals and more. You’ll also find aftermarket and OEM Transmission Parts for other E-350 Econoline model years including 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2004 and more. Select a category of 1999 Ford E-350 Econoline Transmission Parts below and start saving instantly.

Popular 1999 Ford E-350 Econoline Transmission Parts Categories

Automatic Transmission Shift Tubes

Gear Shift Levers

Automatic Transmission Shift Linkages

Automatic Transmission Oil Temperature Sensors

Transmission Torque Converters

OE Transmission Coolers

Manual Transmission Differential Bearings

Transmission Solenoids

Transmission Oil Cooler Lines

Countershaft Bearings

Manual Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Shift Tube Lever Pins

Automatic Transmission Differential Bearings

Transmission Bushings

Automatic Transmission Output Shaft Seals

Transmission Temperature Sensors

Automatic Transmission Oil Pump Seals

Neutral Safety Switch Connectors

Transmission Drain Plugs

Transmission Seals and O-rings

Back Up Light Switch Connectors

Torque Converter Seals

Extension Housing Seals

Transmission Shift Kits

Automatic Transmission Drain Plug Gaskets

Manual Transmission Main Shaft Seals

Front Pump Seals

Remanufactured Automatic Transmissions

Automatic Transmission Overdrive Button Kit

Automatic Transmission Shift Tube Bushings

Essential Transmission Parts for 1999 Ford E-350 Econolines

from

$530.99

Converter: C-6: 1.375 Cp 28-3200 Stall

from

$19.99

This automatic transmission shift tube clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube clamp is designed to match the fit and function of the original clamp.
Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2474.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.29

SHAFT SEAL

from

$67.99

The B&M Shift Improver kit, is the easiest way to get the performance you want out of your transmission. A few simple modifications and your transmission will shift fast, firm and live longer.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$8.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$67.99

from

$26.99

AT Pan Gasket

from

$32.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.49

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models.
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.49

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector.
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability.
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$16.99

When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.

Product Features:

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$36.49

CONE

from

$28.99

from

$39.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$9.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$100.54

AT Neutral Safety Sw

from

$24.49

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.19

Dorman’s quality-engineered Vehicle Speed Sensor restores peak transmission function. Plus, your speedometer, cruise control, power steering and other systems that rely on the TSS return to maximum performance levels.

Product Features:

Durable construction ensures accurate readings
Direct replacement for a proper fit every time
Plugs into mating component smoothly and easily
This part has undergone a rigorous inspection to ensure high quality

from

$6.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

This automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles.
Restores functionality – this pin is made to fit and fully restore part functionality after the original pin fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.79

CUP

from

$15.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 68-91;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1968-1991
Weight approx: 3 Lbs
MOUNT HOLES ON CENTER: 5.56 INCH/141.22 MM
STUDS ON CENTER: 2.71 INCH/68.83 MM
HEIGHT: 2.04 INCH/51.82 MM
MOUNT HOLES: 0.53 X 0.73 INCH/13.5 X 18.54 MM
STUD THREAD: 7/16 – 14 X 1.25

from

$10.99

AT OIL PUMP SEAL

from

$579.99

AT MASTER REPAIR KIT

from

$2.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

Upgrade your 1999 Ford E-350 Econoline with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1999 Ford E-350 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your E-350 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 128 Transmission Parts for the 1999 Ford E-350 Econoline, designed to meet your needs without breaking the bank. From Transmission Mount replacements to Transmission Cooler and Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1999 Ford E-350 Econoline at great prices. Our Transmission Parts inventory for this model ranges from just $4.99 to $2,717.99, with an average price of $153.21. Our 128 Transmission Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1999 Ford E-350 Econoline without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Ford E-350 Econoline, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Dorman, Imperial, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $5.99, and at an average 4 stars rating. With 2,702 customer reviews and counting, our 1999 Ford E-350 Econoline Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Ford E-350 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-350 Econoline in top shape, all in one place. Start shopping confidently below for your 1999 Ford E-350 Econoline!

Best-Selling Transmission Mounts for 1999 Ford E-350 Econolines

Enhance the driving experience in your Ford with 2 quality Transmission Mount components, starting at $25.99.

show more show less

from

$25.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 87-22;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2022
Weight approx: 4 Lbs
MOUNT HOLES ON CENTER: 5.5 INCH /139.7 MM
STUDS ON CENTER: 2.70 INCH/68.58 MM
HEIGHT: 2.7 INCH/68.58 MM
STUDS AND MOUNT OFFSET: 0.25 INCH/6.1 MM

from

$31.04

Transmission Mount

Most Popular 1999 Ford E-350 Econoline Transmission Cooler and Parts

Customize your Ford with 14 Transmission Cooler and Parts products like Transmission Oil Cooler Lines and OE Transmission Coolers, all priced under $145.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$23.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$145.99

Oil cooler 1-1/2″ x 12″ x 15-1/8″. Extra heavy-duty. Designed for severe-duty transmission oil cooling applications.

Product Features:

Imperial Econo-Kool® tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.

from

$129.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$24.49

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top Picks for 1999 Ford E-350 Econoline Transmission Seals

Upgrade Ford E-350 Econolines with top-quality Transmission Seals parts, including 20 OEM and aftermarket selections for your 1999 model.

show more show less

from

$10.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$21.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$14.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

AT EXT HOUSING SEAL

from

$28.99

Design type: spring loaded; multi-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Brand may vary by location

from

$4.99

Product Features:

Brand may vary by location

from

$56.99

REPAIR SLEEVE

from

$20.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$20.99

AT OIL PUMP SEAL

from

$20.71

AT Rear Seal

from

$16.99

AT EXT HOUSING SEAL

from

$15.49

SHAFT SEAL

from

$14.29

SHAFT SEAL

from

$14.29

SHAFT SEAL

from

$10.99

AT OIL PUMP SEAL

In-Demand Automatic Transmission Pan and Gaskets for 1999 Ford E-350 Econolines

Select from 17 premium Automatic Transmission Pan and Gaskets parts for your 1999 Ford E-350 Econoline, with prices ranging from $5.19 to $339.99.

show more show less

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$39.99

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$8.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$54.99

REUSABLE AT PAN GSKT

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$38.99

REUSABLE AT PAN GSKT

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$30.96

AT Pan Gasket

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$24.17

AT Pan Gasket

from

$26.99

AT Pan Gasket

from

$339.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan!

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$339.99

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$5.19

Oil Drain Plug Gaske

Most Sold 1999 Ford E-350 Econoline Automatic Transmission Parts

Explore our best-selling Ford parts for the 1999 E-350 Econoline among 31 OEM and aftermarket options starting from $5.99.

show more show less

from

$7.99

This automatic transmission shift tube bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.99

Direct replacement – this automatic transmission shift tube clamp is designed to match the fit and function of the original clamp.
Restores functionality – this clamp is made to fit and fully restore part functionality after the original clamp fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles.
Restores functionality – this pin is made to fit and fully restore part functionality after the original pin fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Improved 3.2 mm design at highest stress point prevents fractures, which are the leading cause of failure
Upgraded design extends service life, which saves you from future, labor-intensive repairs
Direct OE replacement ensures fit and function like the original
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$55.99

This automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications.
Restores functionality – this tube is made to fit and fully restore part functionality after the original tube fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$16.99

Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$29.99

Direct replacement – this automatic transmission shift tube is designed to match the fit and function of the original tube on specified applications.
Restores functionality – this tube is made to fit and fully restore part functionality after the original tube fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$218.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

All blocks are pretested
All blocks are serialized

from

$217.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

All blocks are pretested
All blocks are serialized

from

$188.99

AT CONTR SOLENOID

from

$2717.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2717.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2710.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2589.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2586.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2493.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2493.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$2399.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2329.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$2329.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2258.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2258.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2029.99

Product might not be available in all states due to local laws.

from

$2029.99

Product might not be available in all states due to local laws.

from

$438.79

AT Solenoid

from

$374.99

This automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$73.99

Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$58.99

from

$44.99

from

$6.49

Top-Rated Transmission Parts Brands For Your 1999 Ford E-350 Econoline

Shop for the best-rated brands offering Transmission Parts and other products for your 1999 Ford E-350 Econolines. Below you’ll find some of our best rated Transmission Parts from Permatex, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 1999 E-350 Econoline start at just $5.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1999 Ford E-350 Econoline Transmission Parts

When it comes to maintaining or upgrading your 1999 Ford E-350 Econoline, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 1999 Ford E-350 Econoline. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Dorman 1999 Ford E-350 Econoline Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 1999 Ford E-350 Econoline owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1999 E-350 Econoline, Advance Auto Parts carries a full inventory of 20 Dorman Transmission Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Transmission Parts range from $5.99 to $438.79, plus, with more than 67 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$29.99

This product is not rated

Shift Tube Lever Plunger Shaft

“”

from
$16.99

This product is not rated

Transmission Shift Cable Repair

“”

from
$9.49

This product is not rated

Transmission Line Connector

“”

FAQs for 1999 Ford E-350 Econoline Transmission Parts

Which Transmission Parts are best-sellers for 1999 Ford E-350 Econolines?

Out of 128 Transmission Parts that fit 1999 Ford E-350 Econolines, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Steering Column Shift Tube And Plunger Assembly (26949799) – $55.99
Steering Column Shift Tube Bushing 2 Piece (10478045) – $7.99

What’s the price range for 1999 Ford E-350 Econoline Transmission Parts?

Transmission Part prices for the 1999 Ford E-350 Econoline start at $4.99 and go up to $2,717.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1999 Ford E-350 Econoline?

The average price for Transmission Parts for the 1999 Ford E-350 Econoline is $153.21. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Ford E-350 Econoline model years?

Yes, we currently carry Transmission Parts for 25 model years of Ford E-350 Econolines between 1975 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 1998, 1997, 1996, 1995, 1994, 1993, 1992, and 1991.

What are the cheapest Transmission Parts for my 1999 Ford E-350 Econoline?

The cheapest 1999 Ford E-350 Econoline Transmission Parts we carry in stock are:

Auto Transmission Extension Housing Seal (Rear Seal) (11407829) – $4.99
Oil Drain Plug Gaske (12108480) – $5.19
Shift Tube Lever Pin (11187951) – $5.99
Automatic Transmission Shift Tube Bushing (12541334) – $6.49
Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99

What are the top-rated Transmission Parts that fit the 1999 Ford E-350 Econoline?

Out of 2,702 reviews by customers, our 1999 Ford E-350 Econoline Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1999 Ford E-350 Econoline and their top-rated products:

Transmission Bearings
- Tapered Cone Wheel Bearing Assembly (15040018) – $10.29
- Bearings (3277259) – $6.99
Transmission Connectors
- Tapered Cone Wheel Bearing Assembly (15040018) – $10.29
- Bearings (3277259) – $6.99
Automatic Transmission Pan and Gaskets
- Tapered Cone Wheel Bearing Assembly (15040018) – $10.29
- Bearings (3277259) – $6.99

What types of Transmission Parts do you sell for my 1999 Ford E-350 Econoline?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 1999 Ford E-350 Econoline:

Can I get help with 1999 Ford E-350 Econoline Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.

What is your return policy for Ford E-350 Econoline Transmission Parts?

Advance Auto Parts keeps returns simple. For new Ford E-350 Econoline Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1999 Ford E-350 Econoline Transmission Parts

Hays – Converter: C-6: 1.375 Cp 28-3200 Stall (Part No.97-2F28Q)

Dorman – Shift Clamp And Bushing (Part No.905-110)

Shift Pro by ETE – E4OD Automatic Transmission Assembly (Part No.T162140)

Carquest Premium – Ignition Control Module Connector (Part No.PTA1196)

FAG US – SHAFT SEAL (Part No.SS2666)

B & M – Shift Improver Kit, 67-91 C6 Transmission (Part No.40262)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18706)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18714)

Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4937)

Mahle – AT Pan Gasket (Part No.J5040195999MAH)

National – Bearings (Part No.207-L)

Dorman – Transmission Drain Plug – M10 -1.5 (sold by each) (Part No.090-206)

Dorman – Transmission Line Connector (Part No.800-753)

Dorman – Help – Transmission Shift Cable Repair (Part No.14908)

FAG US – CONE (Part No.K387-A)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1523)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 17 Quart (Part No.265-813)

National – Multi Purpose Seal (Part No.7929S)

Motorcraft – AT Neutral Safety Sw (Part No.J4050351674MTR)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-483)

Dorman – Vehicle Speed Sensor (Part No.P4018311261DOR)

National – Bearings (Part No.LM102910)

Dorman – Shift Tube Lever Pin (Part No.924-440)

FAG US – CUP (Part No.382A)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2448)

ATP – AT OIL PUMP SEAL (Part No.FO-191)

ATP – AT MASTER REPAIR KIT (Part No.LM-13)

Driveworks – Oil Seal (Part No.S-331107N)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2557)

Autopart International Inc – Transmission Mount (Part No.J60002021602API)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Dorman – Transmission Oil Cooler Line: Exact Fit, Rubber (Part No.624-253)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)

Imperial – Transmission Oil Cooler (Part No.241015)

Dorman – Transmission Oil Cooler (Part No.918-206)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-483)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Multi Purpose Seal (Part No.4765)

National – Multi Purpose Seal (Part No.5203)

National – Multi Purpose Seal (Part No.4764)

National – Multi Purpose Seal (Part No.3404)

National – Multi Purpose Seal (Part No.7929S)

ATP – AT EXT HOUSING SEAL (Part No.HO-8)

National – Multi Purpose Seal (Part No.100086)

Driveworks – Auto Transmission Extension Housing Seal (Rear Seal) (Part No.S-4765)

Driveworks – Auto Transmission Extension Housing Seal (Rear Seal) (Part No.S-4764)

FAG US – REPAIR SLEEVE (Part No.SR3506)

National – Multi Purpose Seal (Part No.4981V)

ATP – AT OIL PUMP SEAL (Part No.LO-29)

SKF – AT Rear Seal (Part No.J5071196959SKF)

ATP – AT EXT HOUSING SEAL (Part No.FO-199)

FAG US – SHAFT SEAL (Part No.SS3054)

FAG US – SHAFT SEAL (Part No.SS2664)

FAG US – SHAFT SEAL (Part No.SS2666)

ATP – AT OIL PUMP SEAL (Part No.FO-191)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 17 Quart (Part No.265-813)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18706)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

ATP – REUSABLE AT PAN GSKT (Part No.FG-300)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18714)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ATP – REUSABLE AT PAN GSKT (Part No.LG-204)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Mahle – AT Pan Gasket (Part No.J5040196958MAH)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Felpro – AT Pan Gasket (Part No.J5040977612FEL)

Mahle – AT Pan Gasket (Part No.J5040195999MAH)

B & M – Cast Deep Transmission Pan For AOD/AODE/ and 4R70W Transmission (Part No.40291)