Name: Series 7000 Fuel Module
Brand: Delphi
SKU: E3001357729DEL
Price: 314.05 USD

from

$314.05

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
Single stage turbine pump provides quiet, energy efficient operation
Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
High capacity filter media helps supply clean fuel to the injection system
Available serviceable in-tank fuel filter for markets with poor quality fuels

from

$299.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$129.99

As the innovator and leader in fuel supply technology DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$8.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$170.98

At last, pump gas with the assurance that you’re helping protect the environment while you save money. Designed to prevent fuel leaks during fill ups and to therefore diminish the associated likelihood of air and roadway pollution, it resists moisture build up. Rust, corrosion, and the deterioration they cause are averted. Keep expensive, potentially hazardous gas where it belongs: in your tank.

Product Features:

Engineered to comply with current emission standards and to pass state inspections
Powder coated and constructed of durable steel for lasting use
Direct replacement for a proper fit every time
Comes with necessary hardware for installation (where applicable)

from

$99.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$164.99

The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$63.99

REGULATOR-WINDW

from

$90.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

from

$8.49

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$31.99

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
One required per side

from

$81.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$85.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$41.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module. The EGR Valve Position Sensor allows the engine control module to monitor the location and operation of the EGR valve.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$69.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$45.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$69.99

Wire Assembly

from

$28.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$59.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$70.99

Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:

Designed and engineered with Delphi expertise
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$11.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$58.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$69.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$8.61

Fuel Injector O-Ring

from

$99.99

CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$56.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$4.79

This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience