1999 Ford E-350 Econoline Differentials

Essential 1999 Ford E-350 Econoline Differentials

Yukon Gear – 10.25" Ford Tracloc Pinion Gear Thrust Washer (Part No.33290)

10.25" Ford Tracloc Pinion Gear Thrust Washer

from

$8.99
10.25″ Ford TracLoc pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Ford 10.25″ with Trac Loc positraction
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

USA Standard Gear – Ring & Pinion Gear Set For ’10 & Down Ford 10.5" In A 4.11 Ratio (Part No.36274)

Ring & Pinion Gear Set For '10 & Down Ford 10.5" In A 4.11 Ratio

from

$285.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits 1999-2010 Ford 10.5″
  • 10.50″ ring gear diameter
  • 31 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Bearing Race Driver (Part No.56010)

Bearing Race Driver

from

$215.99
Bearing race drive for Ford 10.25″ and 10.5 axle bearing. (TK 3920). No return.

Product Features:
  • Bearing race driver
  • Fits 3920 race
  • All steel construction
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – 9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder (Part No.33238)

9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder

from

$9.99
Product Features:
  • Cross pin bolt for Dana Spicer 60 with c-clip axles
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)

Chrome Replacement Cover For Dana 80

from

$69.99
Chrome replacement cover for Dana 80.

Product Features:
  • Fits Dana Spicer 80
  • Chrome
See More

Yukon Gear – Preload Spacer For Dana 70 (Part No.55070)

Preload Spacer For Dana 70

from

$9.99
Product Features:
  • Preload spacer
  • Fits Dana Spicer 70
See More

Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)

Ford 10.25" & 10.5" Cover Gasket

from

$13.99
10.25″ & 10.5″ cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 10.25″ and 10.5″
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)

Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down

from

$509.99
Product Features:
  • Trac Loc positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 60
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Differential (Part No.26045)

Differential

from

$1175.00
Differential

Pro-King – Differential Internal Nest Kit (Part No.717A717C)

Differential Internal Nest Kit

from

$606.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Short Yoke For ’92 And Older Ford 10.25" With A 1330 U/Joint Size (Part No.41037)

Short Yoke For '92 And Older Ford 10.25" With A 1330 U/Joint Size

from

$213.99
Yukon short yoke for ’92 and older Ford 10.25″ with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1992 and down Ford 10.25″
  • 31 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.125″ cap diameter
  • U-bolt style
See More

USA Standard Gear – Pinion Installation Kit For Dana 60 Rear (Part No.60017)

Pinion Installation Kit For Dana 60 Rear

from

$225.99
Product Features:
  • Fits Dana Spicer 60 rear
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Pinion Install Kit For Dana 60 Rear Differential

from

$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)

Replacement Baffle For Dana 70 & 70HD

from

$7.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 70 and 70HD
See More

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Replacement Pinion Seal For ’98 & Newer Ford, Flanged Style (Part No.30001)

Replacement Pinion Seal For '98 & Newer Ford, Flanged Style

from

$47.99
Replacement pinion seal for 1998 and newer Ford (flanged style) Dana 80.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Dana Spicer 80 with 4.375″ O.D. pinion bearing
See More

Popular 1999 Ford E-350 Econoline Differentials Categories

1999 Ford E-350 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 1999 Ford E-350 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 346 different Differentials in our inventory ranging from $2.99 to $1,487.99. That means you can find the exact parts or products you need to keep that 1999 Ford E-350 Econoline running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1999 Ford E-350 Econoline. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1999 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,961 reviews in this category, some of the top rated parts include Bearings with 4.5 stars and Differential Ring And Pinion with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1999 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1999 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1999 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Front Housing Cover Gaskets categories, plus more. For a 1999 Ford E-350 Econoline, our most popular Felpro Differentials include:
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Front Housing Cover Gaskets

FAQs for 1999 Ford E-350 Econoline Differentials

What are the most purchased Differentials for the 1999 Ford E-350 Econoline?

Out of 346 Differentials for the 1999 Ford E-350 Econoline, the most popular in our inventory are:
Rear Differential Cover
from $63.99
This product is not rated
Rear Differential Cover
Differential Covers
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Bearings
from $6.99
(6)
Bearings
Differential Bearings

What are the top-rated 1999 Ford E-350 Econoline Differentials?

Top-rated Differentials for your 1999 Ford E-350 Econoline based on customer reviews/ratings are:
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”
Differential Ring And Pinion
from $369.99
(1)
Differential Ring And Pinion
“Be patient after install….may make bearing type noise the first few starts….after that smooth sailing!”
Differential Master Bearing Kit - Timken
from $198.99
(1)
Differential Master Bearing Kit – Timken
“Good product”