1999 Dodge Ram 3500 Pickup Drivetrains

Essential 1999 Dodge Ram 3500 Pickup Drivetrains

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Yukon Gear – Outer Stub Axle Nut Washer For Dodge Dana 44 & 60 (Part No.33491)

Outer Stub Axle Nut Washer For Dodge Dana 44 & 60

from

$7.99
Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:
  • Outer stub axle nut washer for Dodge Dana 44 and 60
See More

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Dura Grip For GM & Chrysler 11.5", 30 Spline

from

$1485.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM and Chrysler 11.5″ with 30 spline axles
  • Clutch style positraction
  • Smooth design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Pinion Install Kit For ’03 And Newer Chrysler Dodge Truck 9.25" Front Differential (Part No.13094)

Pinion Install Kit For '03 And Newer Chrysler Dodge Truck 9.25" Front Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ front
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)

Zip Locker Bulkhead Fitting

from

$27.99
Product Features:
  • Bulkhead fitting
See More

Powertrax – No-Slip Traction System (Part No.9203923125)

No-Slip Traction System

from

$579.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-804010)

    Tapered Roller Bearing

    from

    $15.29
    Product Features:
    • Brand may vary by location
    See More

    Dorman – Spindle Nut (Part No.K1002831732DOR)

    Spindle Nut

    from

    $59.28
    Spindle Nut

    Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)

    Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit

    from

    $17.99
    U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

    Product Features:
    • u-joint strap kit
    • Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
    • 1350 and 1410 u-joint size
    • Includes two straps and four bolts
    See More

    Dorman – Rear Axle Differential Vent (Part No.924-263)

    Rear Axle Differential Vent

    from

    $9.49
    This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
    • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

    Plug Adapter For Extra-Large Clamshell

    from

    $47.99
    Plug adapter for extra-large clamshell. No Return.

    Product Features:
    • Plug adapter for Extra Large clamshell
    • Fits carrier bearing puller
    See More

    Yukon Gear – Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up (Part No.32172)

    Steel Spool For Dana 80 With 35 Spline Axles, 4.10 & Up

    from

    $747.99
    Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler Dana Spicer 80 with 35 spline axles
    • 4.10 and up ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55447)

    Differential Cover Gasket

    from

    $15.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Inner Axle Bearing For Dodge Dana 44 & 60 Disconnect, 1.625" O.D., 0.500" Wide (Part No.18052)

    Inner Axle Bearing For Dodge Dana 44 & 60 Disconnect, 1.625" O.D., 0.500" Wide

    from

    $44.99
    Product Features:
    • Inner axle bearing
    • Fits Dana Spicer 44 and 60 with disconnect axles
    • 1.625″ O.D.
    • 0.500″ wide
    See More

    MOOG Driveline Products – Double Cardan CV Flange Yoke (Part No.628C)

    Double Cardan CV Flange Yoke

    from

    $123.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Machined bodies to meet the tight tolerances
    • Forged and cast material to meet the performance requirement
    • Minimize the flash lines for less interference
    • Cleaning process induces compressive strength for increased performance
    • Machined and threaded holes for mounting ease
    • Rust preventative added for longer shelf life
    See More

    Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

    Dana 80 Tracloc Clutch Set Round Design

    from

    $502.99
    Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

    Product Features:
    • Clutch kit
    • Fit Dana Spicer 80 Trac Loc positraction
    See More

    Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-148)

    Rear Drive Shaft: Greaseable, Adjustable

    from

    $1007.99
    Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

    Product Features:
    • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
    • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
    • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction – non-staked universal joints are designed for future serviceability
    See More

    USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

    Replacement Standard Spider Gear Set For Dana 70, 35 Spline

    from

    $249.99
    Product Features:
    • Spider gear kit
    • Fit Dana Spicer 70 and 80 open differential with 35 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-991)

    Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

    from

    $69.99
    This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-547)

    Differential Pinion Yoke Assembly

    from

    $202.99
    Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

    Product Features:
    • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
    • Effective fix – replacement restores proper connection between drive shaft and differential
    • Rigorously tested – designed and evaluated to assure safe, reliable operation
    • Trustworthy quality – backed by team of engineers and inspectors in the United States
    See More

    National – Multi Purpose Seal (Part No.710771)

    Multi Purpose Seal

    from

    $61.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Pro-King – Differential Internal Nest Kit (Part No.718A717)

    Differential Internal Nest Kit

    from

    $440.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)

    Locking Key / Wedge For Dana 60 & 70 Spindle Nut

    from

    $29.99
    Product Features:
    • Locking key/wedge
    • Fits Dana Spicer 60 and 70
    See More

    Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

    Replacement Baffle For Dana 60 & Dana 70-U

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
    See More

    Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

    O-Ring For Dana 60 Zip Locker Seal Housing

    from

    $11.29
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 60
    See More

    National – Bearings (Part No.HM88610)

    Bearings

    from

    $15.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Crown Auto Jeep Replacmnt – Black (Part No.52070427AB)

    Black

    from

    $11.99
    Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

    Product Features:
    • Leading Manufacturer Of Quality Replacement Parts For Jeep
    • Meets Standards For Quality
    • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
    • Easy Installation
    See More

    Popular 1999 Dodge Ram 3500 Pickup Drivetrains Categories

    1999 Dodge Ram 3500 Pickup Drivetrains

    You count on your 1999 Dodge Ram 3500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 544 Drivetrains ranging in price from $2.99 to $3,330.00, you’re sure to find everything you need for your 1999 Dodge Ram 3500 Pickup.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Moog, National, and Driveworks. 1999 Dodge Ram 3500 Pickup Drivetrains start as low as $2.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,827 extensive product reviews on 1999 Dodge Ram 3500 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 5.0 stars and 4WD Vacuum Actuator, Front Axle with 4.4 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1999 Dodge Ram 3500 Pickup below to get started!

    Top-Rated Drivetrains Brands For Your 1999 Dodge Ram 3500 Pickup

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1999 Dodge Ram 3500 Pickup running right for years to come. In our inventory you’ll find brands like Moog, National, Driveworks, and even more.

    Popular Richmond Gear Drivetrains

    You’ll find popular Richmond Gear brand products across Differentials. All are waiting to get your 1999 Dodge Ram 3500 Pickup back on the road. Some of the top-rated Richmond Gear products in these categories are:
    Differential Ring And Pinion
    from $369.99
    (1)
    Differential Ring And Pinion
    Differential Ring and Pinions

    FAQs for 1999 Dodge Ram 3500 Pickup Drivetrains

    What are the most purchased Drivetrains for the 1999 Dodge Ram 3500 Pickup?

    Out of 544 Drivetrains for the 1999 Dodge Ram 3500 Pickup, the most popular in our inventory are:
    Universal Joint
    from $15.99
    (65)
    Universal Joint
    U-Joints
    Bearings
    from $16.99
    (39)
    Bearings
    Axle Shaft Bearings

    What are the top-rated 1999 Dodge Ram 3500 Pickup Drivetrains?

    Top-rated Drivetrains for your 1999 Dodge Ram 3500 Pickup based on customer reviews/ratings are:
    Greaseable Premium Universal Joint
    from $59.99
    (25)
    Greaseable Premium Universal Joint
    “Fit perfectly and good quality”
    4WD Vacuum Actuator, Front Axle
    from $128.99
    (23)
    4WD Vacuum Actuator, Front Axle
    “Part works perfectly. I now have 4WD as soon as i engage it.”
    Multi Purpose Seal
    from $15.29
    (20)
    Multi Purpose Seal
    “Would have been fine most likely – if correct seal was in the box. For redoing a Front Crank Seal on a 4 cylinder 89 Ranger.”