from

$35.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

from

$44.99

Product Features:

Stub shaft thrust washer
Fits GM 9.25″ IFS

from

$314.99

This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits 1998 and up GM 10.5″ 14 bolt truck
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$9.99

Product Features:

U-joint strap
Fits GM 10.5″ 14 bolt truck
1350 and 1410 u-joint size
One single strap

from

$671.23

Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:

Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
Features an advanced sensor and sensor technology for superb performance.
Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$13.99

14T cover gasket.

Product Features:

Cover gasket
Fits GM 10.5″ 14 bolt truck

from

$8.49

U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

Product Features:

u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″

from

$111.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Robust design and high grade materials meet the stringent demands of today’s service professional
Our switches are manufactured under a completely quality control process from componentry to finished products by experienced professional

from

$287.99

Yukon mini spool for GM 10.5″ 14 bolt truck.

Product Features:

Fits 10.5″ GM 14 bolt truck
Provides 100% traction to both wheels at all times
Installs into standard open carrier case

from

$17.29

Product Features:

Brand may vary by location

from

$6.99

This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits 382A race
All steel construction

from

$77.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.49

Product Features:

KIT SHIM PINION

from

$3.19

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$11.58

Differential Drain P

from

$156.99

Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:

Cross pin shaft
Fits Dana Spicer 60 and 70
Powr Lok positraction only

from

$34.99

Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:

Save labor with easy installation methods
Comes with grease and clamps
Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
The Speedi and Quick Boot are installed without special tools

from

$37.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$589.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$73.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$12.29

This transfer case adapter seal matches the fit and function of worn or damaged original equipment part. This seal should be replaced as part any service that requires the transfer case and transmission to be separated.

Product Features:

Ideal replacement – this transfer case adapter O-ring is a direct replacement for a worn or damaged original equipment seal between the transfer case and transmission
Convenient on-hand part – this seal should be replaced whenever the transfer case is removed for service
Application-specific design – this O-ring has been designed of durable materials specifically for this vehicle application
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$5.99

Differential Cover B

from

$429.99

Yukon 4340 cut to length shaft for GM 14T & 11.5″, 30 spline, 34.8″-38.8″. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. Please verify bolt pattern on 2011 & later models. This axle has a 3.562″ bolt pattern. Some late model applcaitons use a larger bolt pattern.

Product Features:

Fits GM 10.5″ 14 bolt truck and GM 11.5″
4340 Chromoly
30 spline
Cut to length design fits 34.8″-38.8″ applications

from

$1455.00

Yukon front 4340 Chrome-Moly replacement axle kit for ’77-’91 GM, Dana 60 with 35 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Dana U/joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features: